[Freedreno] [PATCH RFC v4 2/7] drm: Introduce pixel_source DRM plane property
Jessica Zhang
quic_jesszhan at quicinc.com
Mon Jul 10 19:51:53 UTC 2023
On 6/30/2023 1:27 AM, Pekka Paalanen wrote:
> On Fri, 30 Jun 2023 03:42:28 +0300
> Dmitry Baryshkov <dmitry.baryshkov at linaro.org> wrote:
>
>> On 30/06/2023 03:25, Jessica Zhang wrote:
>>> Add support for pixel_source property to drm_plane and related
>>> documentation.
>>>
>>> This enum property will allow user to specify a pixel source for the
>>> plane. Possible pixel sources will be defined in the
>>> drm_plane_pixel_source enum.
>>>
>>> The current possible pixel sources are DRM_PLANE_PIXEL_SOURCE_FB and
>>> DRM_PLANE_PIXEL_SOURCE_COLOR. The default value is *_SOURCE_FB.
>>
>> I think, this should come before the solid fill property addition. First
>> you tell that there is a possibility to define other pixel sources, then
>> additional sources are defined.
>
> Hi,
>
> that would be logical indeed.
Hi Dmitry and Pekka,
Sorry for the delay in response, was out of office last week.
Acked.
>
>>>
>>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>>> ---
>>> drivers/gpu/drm/drm_atomic_state_helper.c | 1 +
>>> drivers/gpu/drm/drm_atomic_uapi.c | 4 ++
>>> drivers/gpu/drm/drm_blend.c | 81 +++++++++++++++++++++++++++++++
>>> include/drm/drm_blend.h | 2 +
>>> include/drm/drm_plane.h | 21 ++++++++
>>> 5 files changed, 109 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>>> index fe14be2bd2b2..86fb876efbe6 100644
>>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>>> @@ -252,6 +252,7 @@ void __drm_atomic_helper_plane_state_reset(struct drm_plane_state *plane_state,
>>>
>>> plane_state->alpha = DRM_BLEND_ALPHA_OPAQUE;
>>> plane_state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
>>> + plane_state->pixel_source = DRM_PLANE_PIXEL_SOURCE_FB;
>>>
>>> if (plane_state->solid_fill_blob) {
>>> drm_property_blob_put(plane_state->solid_fill_blob);
>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>> index a28b4ee79444..6e59c21af66b 100644
>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>> @@ -596,6 +596,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
>>> drm_property_blob_put(solid_fill);
>>>
>>> return ret;
>>> + } else if (property == plane->pixel_source_property) {
>>> + state->pixel_source = val;
>>> } else if (property == plane->alpha_property) {
>>> state->alpha = val;
>>> } else if (property == plane->blend_mode_property) {
>>
>> I think, it was pointed out in the discussion that drm_mode_setplane()
>> (a pre-atomic IOCTL to turn the plane on and off) should also reset
>> pixel_source to FB.
I don't remember drm_mode_setplane() being mentioned in the pixel_source
discussion... can you share where it was mentioned?
I'd prefer to avoid having driver change the pixel_source directly as it
could cause some unexpected side effects. In general, I would like
userspace to assign the value of pixel_source without driver doing
anything "under the hood".
>>
>>> @@ -671,6 +673,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
>>> } else if (property == plane->solid_fill_property) {
>>> *val = state->solid_fill_blob ?
>>> state->solid_fill_blob->base.id : 0;
>>> + } else if (property == plane->pixel_source_property) {
>>> + *val = state->pixel_source;
>>> } else if (property == plane->alpha_property) {
>>> *val = state->alpha;
>>> } else if (property == plane->blend_mode_property) {
>>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>>> index 38c3c5d6453a..8c100a957ee2 100644
>>> --- a/drivers/gpu/drm/drm_blend.c
>>> +++ b/drivers/gpu/drm/drm_blend.c
>>> @@ -189,6 +189,18 @@
>>> * solid_fill is set up with drm_plane_create_solid_fill_property(). It
>>> * contains pixel data that drivers can use to fill a plane.
>>> *
>>> + * pixel_source:
>>> + * pixel_source is set up with drm_plane_create_pixel_source_property().
>>> + * It is used to toggle the source of pixel data for the plane.
>
> Other sources than the selected one are ignored?
Yep, the plane will only display the data from the set pixel_source.
So if pixel_source == FB and solid_fill_blob is non-NULL,
solid_fill_blob will be ignored and the plane will display the FB that
is set.
Will add a note about this in the comment docs.
>
>>> + *
>>> + * Possible values:
>
> Wouldn't hurt to explicitly mention here that this is an enum.
Acked.
>
>>> + *
>>> + * "FB":
>>> + * Framebuffer source
>>> + *
>>> + * "COLOR":
>>> + * solid_fill source
>
> I think these two should be more explicit. Framebuffer source is the
> usual source from the property "FB_ID". Solid fill source comes from
> the property "solid_fill".
Acked.
>
> Why "COLOR" and not, say, "SOLID_FILL"?
Ah, that would make more sense :)
I'll change this to "SOLID_FILL".
>
>>> + *
>>> * Note that all the property extensions described here apply either to the
>>> * plane or the CRTC (e.g. for the background color, which currently is not
>>> * exposed and assumed to be black).
>>> @@ -648,3 +660,72 @@ int drm_plane_create_solid_fill_property(struct drm_plane *plane)
>>> return 0;
>>> }
>>> EXPORT_SYMBOL(drm_plane_create_solid_fill_property);
>>> +
>>> +/**
>>> + * drm_plane_create_pixel_source_property - create a new pixel source property
>>> + * @plane: drm plane
>>> + * @supported_sources: bitmask of supported pixel_sources for the driver (NOT
>>> + * including DRM_PLANE_PIXEL_SOURCE_FB, as it will be supported
>>> + * by default).
>>
>> I'd say this is too strong. I'd suggest either renaming this to
>> extra_sources (mentioning that FB is enabled for all the planes) or
>> allowing any source bitmask (mentioning that FB should be enabled by the
>> caller, unless there is a good reason not to do so).
>
> Right. I don't see any problem with having planes of type OVERLAY that
> support only solid_fill and no FB. Planes of type PRIMARY and CURSOR I
> would expect to always support at least FB.
>
> Atomic userspace is prepared to have an OVERLAY plane fail for any
> arbitrary reason. Legacy userspace probably should not ever see a plane
> that does not support FB.
Got it... If we allow the possibility of FB sources not being supported,
then should the default pixel_source per plane be decided by the driver too?
I'd forced FB support so that I could set pixel_source to FB in
__drm_atomic_helper_plane_state_reset(). If we allow more flexibility in
the default pixel_source value, I guess we can also store a
default_pixel_source value in the plane_state.
>
>>> + *
>>> + * This creates a new property describing the current source of pixel data for the
>>> + * plane.
>>> + *
>>> + * The property is exposed to userspace as an enumeration property called
>>> + * "pixel_source" and has the following enumeration values:
>>> + *
>>> + * "FB":
>>> + * Framebuffer pixel source
>>> + *
>>> + * "COLOR":
>>> + * Solid fill color pixel source
>>> + *
>>> + * Returns:
>>> + * Zero on success, negative errno on failure.
>>> + */
>>> +int drm_plane_create_pixel_source_property(struct drm_plane *plane,
>>> + unsigned int supported_sources)
>>> +{
>>> + struct drm_device *dev = plane->dev;
>>> + struct drm_property *prop;
>>> + const struct drm_prop_enum_list enum_list[] = {
>>> + { DRM_PLANE_PIXEL_SOURCE_FB, "FB" },
>>> + { DRM_PLANE_PIXEL_SOURCE_COLOR, "COLOR" },
>>> + };
>>> + unsigned int valid_source_mask = BIT(DRM_PLANE_PIXEL_SOURCE_FB) |
>>> + BIT(DRM_PLANE_PIXEL_SOURCE_COLOR);
>>
>>
>> static const?
Acked.
>>
>>> + int i;
>>> +
>>> + /* FB is supported by default */
>>> + supported_sources |= BIT(DRM_PLANE_PIXEL_SOURCE_FB);
>>> +
>>> + if (WARN_ON(supported_sources & ~valid_source_mask))
>>> + return -EINVAL;
>>> +
>>> + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "pixel_source",
>
> Shouldn't this be an atomic prop?
Acked.
>
>
>>> + hweight32(supported_sources));
>>> +
>>> + if (!prop)
>>> + return -ENOMEM;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(enum_list); i++) {
>>> + int ret;
>>> +
>>> + if (!(BIT(enum_list[i].type) & supported_sources))
>>
>> test_bit?
Acked.
>>
>>> + continue;
>>> +
>>> + ret = drm_property_add_enum(prop, enum_list[i].type, enum_list[i].name);
>>> +
>>
>> No need for an empty line in such cases. Please drop it.
Acked.
>>
>>> + if (ret) {
>>> + drm_property_destroy(dev, prop);
>>> +
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + drm_object_attach_property(&plane->base, prop, DRM_PLANE_PIXEL_SOURCE_FB);
>>> + plane->pixel_source_property = prop;
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL(drm_plane_create_pixel_source_property);
>>> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
>>> index 0338a860b9c8..31af7cfa5b1b 100644
>>> --- a/include/drm/drm_blend.h
>>> +++ b/include/drm/drm_blend.h
>>> @@ -59,4 +59,6 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
>>> int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>>> unsigned int supported_modes);
>>> int drm_plane_create_solid_fill_property(struct drm_plane *plane);
>>> +int drm_plane_create_pixel_source_property(struct drm_plane *plane,
>>> + unsigned int supported_sources);
>>> #endif
>>> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
>>> index f6ab313cb83e..73fb6cf8a5d9 100644
>>> --- a/include/drm/drm_plane.h
>>> +++ b/include/drm/drm_plane.h
>>> @@ -59,6 +59,12 @@ struct drm_solid_fill {
>>> uint32_t b;
>>> };
>>>
>>> +enum drm_plane_pixel_source {
>>> + DRM_PLANE_PIXEL_SOURCE_FB,
>>> + DRM_PLANE_PIXEL_SOURCE_COLOR,
>>> + DRM_PLANE_PIXEL_SOURCE_MAX
>>> +};
>
> Just to be very clear that I'm not confusing you with my comment about
> UAPI headers in the previous patch, this enum is already in a good
> place. It does not belong in a UAPI header, because userspace
> recognises enum values by the name string.
Got it.
Thanks,
Jessica Zhang
>
>
> Thanks,
> pq
>
>>> +
>>> /**
>>> * struct drm_plane_state - mutable plane state
>>> *
>>> @@ -152,6 +158,14 @@ struct drm_plane_state {
>>> */
>>> struct drm_solid_fill solid_fill;
>>>
>>> + /*
>>> + * @pixel_source:
>>> + *
>>> + * Source of pixel information for the plane. See
>>> + * drm_plane_create_pixel_source_property() for more details.
>>> + */
>>> + enum drm_plane_pixel_source pixel_source;
>>> +
>>> /**
>>> * @alpha:
>>> * Opacity of the plane with 0 as completely transparent and 0xffff as
>>> @@ -742,6 +756,13 @@ struct drm_plane {
>>> */
>>> struct drm_property *solid_fill_property;
>>>
>>> + /*
>>> + * @pixel_source_property:
>>> + * Optional pixel_source property for this plane. See
>>> + * drm_plane_create_pixel_source_property().
>>> + */
>>> + struct drm_property *pixel_source_property;
>>> +
>>> /**
>>> * @alpha_property:
>>> * Optional alpha property for this plane. See
>>>
>>
>
More information about the Freedreno
mailing list