[Freedreno] [PATCH RFC v4 1/7] drm: Introduce solid fill DRM plane property

Jessica Zhang quic_jesszhan at quicinc.com
Mon Jul 10 23:12:06 UTC 2023



On 6/30/2023 1:27 AM, Pekka Paalanen wrote:
> On Thu, 29 Jun 2023 17:25:00 -0700
> Jessica Zhang <quic_jesszhan at quicinc.com> wrote:
> 
>> Document and add support for solid_fill property to drm_plane. In
>> addition, add support for setting and getting the values for solid_fill.
>>
>> To enable solid fill planes, userspace must assign a property blob to
>> the "solid_fill" plane property containing the following information:
>>
>> struct drm_solid_fill_info {
>> 	u8 version;
>> 	u32 r, g, b;
>> };
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> 
> Hi Jessica,
> 
> I've left some general UAPI related comments here.
> 
>> ---
>>   drivers/gpu/drm/drm_atomic_state_helper.c |  9 +++++
>>   drivers/gpu/drm/drm_atomic_uapi.c         | 55 +++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/drm_blend.c               | 33 +++++++++++++++++++
>>   include/drm/drm_blend.h                   |  1 +
>>   include/drm/drm_plane.h                   | 43 ++++++++++++++++++++++++
>>   5 files changed, 141 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>> index 784e63d70a42..fe14be2bd2b2 100644
>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>> @@ -253,6 +253,11 @@ void __drm_atomic_helper_plane_state_reset(struct drm_plane_state *plane_state,
>>   	plane_state->alpha = DRM_BLEND_ALPHA_OPAQUE;
>>   	plane_state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
>>   
>> +	if (plane_state->solid_fill_blob) {
>> +		drm_property_blob_put(plane_state->solid_fill_blob);
>> +		plane_state->solid_fill_blob = NULL;
>> +	}
>> +
>>   	if (plane->color_encoding_property) {
>>   		if (!drm_object_property_get_default_value(&plane->base,
>>   							   plane->color_encoding_property,
>> @@ -335,6 +340,9 @@ void __drm_atomic_helper_plane_duplicate_state(struct drm_plane *plane,
>>   	if (state->fb)
>>   		drm_framebuffer_get(state->fb);
>>   
>> +	if (state->solid_fill_blob)
>> +		drm_property_blob_get(state->solid_fill_blob);
>> +
>>   	state->fence = NULL;
>>   	state->commit = NULL;
>>   	state->fb_damage_clips = NULL;
>> @@ -384,6 +392,7 @@ void __drm_atomic_helper_plane_destroy_state(struct drm_plane_state *state)
>>   		drm_crtc_commit_put(state->commit);
>>   
>>   	drm_property_blob_put(state->fb_damage_clips);
>> +	drm_property_blob_put(state->solid_fill_blob);
>>   }
>>   EXPORT_SYMBOL(__drm_atomic_helper_plane_destroy_state);
>>   
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>> index d867e7f9f2cd..a28b4ee79444 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -316,6 +316,51 @@ drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
>>   }
>>   EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector);
>>   
>> +static int drm_atomic_set_solid_fill_prop(struct drm_plane_state *state,
>> +		struct drm_property_blob *blob)
>> +{
>> +	int ret = 0;
>> +	int blob_version;
>> +
>> +	if (blob == state->solid_fill_blob)
>> +		return 0;
>> +
>> +	drm_property_blob_put(state->solid_fill_blob);
>> +	state->solid_fill_blob = NULL;
> 
> Is it ok to destroy old state before it is guaranteed that the new
> state is accepted?

Hi Pekka,

Good point. I'll change this behavior so that an error case will keep 
the old solid_fill_blob value.

> 
>> +
>> +	memset(&state->solid_fill, 0, sizeof(state->solid_fill));
>> +
>> +	if (blob) {
>> +		struct drm_solid_fill_info *user_info = (struct drm_solid_fill_info *)blob->data;
>> +
>> +		if (blob->length != sizeof(struct drm_solid_fill_info)) {
>> +			drm_dbg_atomic(state->plane->dev,
>> +				       "[PLANE:%d:%s] bad solid fill blob length: %zu\n",
>> +				       state->plane->base.id, state->plane->name,
>> +				       blob->length);
>> +			return -EINVAL;
>> +		}
>> +
>> +		blob_version = user_info->version;
>> +
>> +		/* Add more versions if necessary */
>> +		if (blob_version == 1) {
>> +			state->solid_fill.r = user_info->r;
>> +			state->solid_fill.g = user_info->g;
>> +			state->solid_fill.b = user_info->b;
>> +		} else {
>> +			drm_dbg_atomic(state->plane->dev,
>> +				       "[PLANE:%d:%s] failed to set solid fill (ret=%d)\n",
>> +				       state->plane->base.id, state->plane->name,
>> +				       ret);
>> +			return -EINVAL;
> 
> Btw. how does the atomic check machinery work here?
> 
> I expect that a TEST_ONLY atomic commit will do all the above checks
> and return failure if anything is not right. Right?

Correct, drm_atomic_set_property() will still be called for a TEST_ONLY 
commit, so these checks will still happen and return an error (or set 
the property) when appropriate.

> 
>> +		}
>> +		state->solid_fill_blob = drm_property_blob_get(blob);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>>   static void set_out_fence_for_crtc(struct drm_atomic_state *state,
>>   				   struct drm_crtc *crtc, s32 __user *fence_ptr)
>>   {
>> @@ -544,6 +589,13 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
>>   		state->src_w = val;
>>   	} else if (property == config->prop_src_h) {
>>   		state->src_h = val;
>> +	} else if (property == plane->solid_fill_property) {
>> +		struct drm_property_blob *solid_fill = drm_property_lookup_blob(dev, val);
>> +
>> +		ret = drm_atomic_set_solid_fill_prop(state, solid_fill);
>> +		drm_property_blob_put(solid_fill);
>> +
>> +		return ret;
>>   	} else if (property == plane->alpha_property) {
>>   		state->alpha = val;
>>   	} else if (property == plane->blend_mode_property) {
>> @@ -616,6 +668,9 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
>>   		*val = state->src_w;
>>   	} else if (property == config->prop_src_h) {
>>   		*val = state->src_h;
>> +	} else if (property == plane->solid_fill_property) {
>> +		*val = state->solid_fill_blob ?
>> +			state->solid_fill_blob->base.id : 0;
>>   	} else if (property == plane->alpha_property) {
>>   		*val = state->alpha;
>>   	} else if (property == plane->blend_mode_property) {
>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>> index 6e74de833466..38c3c5d6453a 100644
>> --- a/drivers/gpu/drm/drm_blend.c
>> +++ b/drivers/gpu/drm/drm_blend.c
>> @@ -185,6 +185,10 @@
>>    *		 plane does not expose the "alpha" property, then this is
>>    *		 assumed to be 1.0
>>    *
>> + * solid_fill:
>> + *	solid_fill is set up with drm_plane_create_solid_fill_property(). It
>> + *	contains pixel data that drivers can use to fill a plane.
> 
> This is a nice start, but I feel it needs to explain much more about
> how userspace should go about making use of this.
> 
> Yeah, the pixel_source property comes in the next patch, but I feel
> that it is harder to review if the doc is built over multiple patches.
> My personal approach would be to write the doc in full and referring to
> pixel_source property already, and explain in the commit message that
> the next patch will add pixel_source so people don't wonder about
> referring to a non-existing property.
> 
> I mean just a reference to pixel_source, and leave the actual
> pixel_source doc for the patch adding the property like it already is.
> 
> Dmitry's suggestion of swapping the patch order is good too.

Makes sense. I'll switch the patch order, but will keep this in mind.

> 
>> + *
>>    * Note that all the property extensions described here apply either to the
>>    * plane or the CRTC (e.g. for the background color, which currently is not
>>    * exposed and assumed to be black).
>> @@ -615,3 +619,32 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>>   	return 0;
>>   }
>>   EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
>> +
>> +/**
>> + * drm_plane_create_solid_fill_property - create a new solid_fill property
>> + * @plane: drm plane
>> + *
>> + * This creates a new property that holds pixel data for solid fill planes. This
>> + * property is exposed to userspace as a property blob called "solid_fill".
>> + *
>> + * For information on what the blob contains, see `drm_solid_fill_info`.
> 
> I think you should be more explicit here. For example: the blob must
> contain exactly one struct drm_solid_fill_info.
> 
> It's better to put this content spec with the UAPI doc rather than in this
> kerner-internal function doc that userspace programmers won't know to
> look at.

Acked.

> 
>> + *
>> + * Returns:
>> + * Zero on success, negative errno on failure.
>> + */
>> +int drm_plane_create_solid_fill_property(struct drm_plane *plane)
>> +{
>> +	struct drm_property *prop;
>> +
>> +	prop = drm_property_create(plane->dev,
>> +			DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
>> +			"solid_fill", 0);
>> +	if (!prop)
>> +		return -ENOMEM;
>> +
>> +	drm_object_attach_property(&plane->base, prop, 0);
>> +	plane->solid_fill_property = prop;
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(drm_plane_create_solid_fill_property);
>> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
>> index 88bdfec3bd88..0338a860b9c8 100644
>> --- a/include/drm/drm_blend.h
>> +++ b/include/drm/drm_blend.h
>> @@ -58,4 +58,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
>>   			      struct drm_atomic_state *state);
>>   int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>>   					 unsigned int supported_modes);
>> +int drm_plane_create_solid_fill_property(struct drm_plane *plane);
>>   #endif
>> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
>> index 51291983ea44..f6ab313cb83e 100644
>> --- a/include/drm/drm_plane.h
>> +++ b/include/drm/drm_plane.h
>> @@ -40,6 +40,25 @@ enum drm_scaling_filter {
>>   	DRM_SCALING_FILTER_NEAREST_NEIGHBOR,
>>   };
>>   
>> +/**
>> + * struct drm_solid_fill_info - User info for solid fill planes
>> + */
>> +struct drm_solid_fill_info {
>> +	__u8 version;
>> +	__u32 r, g, b;
>> +};
> 
> Shouldn't UAPI structs be in UAPI headers?

Acked, will move this to uapi/drm_mode.h

> 
> Shouldn't UAPI structs use explicit padding to not leave any gaps when
> it's unavoidable? And the kernel to check that the gaps are indeed
> zeroed?

I don't believe so... From my understanding, padding will be taken care 
of by the compiler by default. Looking at the drm_mode_modeinfo UAPI 
struct [1], it also doesn't seem to do explicit padding. And the 
corresponding set_property() code doesn't seem check the gaps either.

That being said, it's possible that I'm missing something here, so 
please let me know if that's the case.

[1] 
https://elixir.bootlin.com/linux/v6.5-rc1/source/include/uapi/drm/drm_mode.h#L242

> 
> It also needs more UAPI doc, like a link to the property doc that uses
> this and an explanation of what the values mean.

Acked.

Thanks,

Jessica Zhang

> 
> 
> Thanks,
> pq
> 
>> +
>> +/**
>> + * struct solid_fill_property - RGB values for solid fill plane
>> + *
>> + * Note: This is the V1 for this feature
>> + */
>> +struct drm_solid_fill {
>> +	uint32_t r;
>> +	uint32_t g;
>> +	uint32_t b;
>> +};
>> +
>>   /**
>>    * struct drm_plane_state - mutable plane state
>>    *
>> @@ -116,6 +135,23 @@ struct drm_plane_state {
>>   	/** @src_h: height of visible portion of plane (in 16.16) */
>>   	uint32_t src_h, src_w;
>>   
>> +	/**
>> +	 * @solid_fill_blob:
>> +	 *
>> +	 * Blob containing relevant information for a solid fill plane
>> +	 * including pixel format and data. See
>> +	 * drm_plane_create_solid_fill_property() for more details.
>> +	 */
>> +	struct drm_property_blob *solid_fill_blob;
>> +
>> +	/**
>> +	 * @solid_fill:
>> +	 *
>> +	 * Pixel data for solid fill planes. See
>> +	 * drm_plane_create_solid_fill_property() for more details.
>> +	 */
>> +	struct drm_solid_fill solid_fill;
>> +
>>   	/**
>>   	 * @alpha:
>>   	 * Opacity of the plane with 0 as completely transparent and 0xffff as
>> @@ -699,6 +735,13 @@ struct drm_plane {
>>   	 */
>>   	struct drm_plane_state *state;
>>   
>> +	/*
>> +	 * @solid_fill_property:
>> +	 * Optional solid_fill property for this plane. See
>> +	 * drm_plane_create_solid_fill_property().
>> +	 */
>> +	struct drm_property *solid_fill_property;
>> +
>>   	/**
>>   	 * @alpha_property:
>>   	 * Optional alpha property for this plane. See
>>
> 


More information about the Freedreno mailing list