[Freedreno] [PATCH 02/15] phy: qualcomm: add QMP HDMI PHY driver
Vinod Koul
vkoul at kernel.org
Tue Jul 11 07:23:46 UTC 2023
On 23-05-23, 15:14, Dmitry Baryshkov wrote:
> Port Qualcomm QMP HDMI PHY to the generic PHY framework. Split the
> generic part and the msm8996 part. When adding support for msm8992/4 and
> msm8998 (which also employ QMP for HDMI PHY), one will have to provide
> the PLL programming part only.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/phy/qualcomm/Kconfig | 7 +
> drivers/phy/qualcomm/Makefile | 5 +
> drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c | 184 ++++++++
> .../phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c | 441 ++++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h | 75 +++
> 5 files changed, 712 insertions(+)
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h
>
> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
> index 4850d48f31fa..94fb5679df4a 100644
> --- a/drivers/phy/qualcomm/Kconfig
> +++ b/drivers/phy/qualcomm/Kconfig
> @@ -65,6 +65,13 @@ config PHY_QCOM_QMP_COMBO
> Enable this to support the QMP Combo PHY transceiver that is used
> with USB3 and DisplayPort controllers on Qualcomm chips.
>
> +config PHY_QCOM_QMP_HDMI
> + tristate "Qualcomm QMP HDMI PHY Driver"
> + default PHY_QCOM_QMP && DRM_MSM_HDMI
> + help
> + Enable this to support the QMP HDMI PHY transceiver that is used
> + with HDMI output on Qualcomm MSM8996 chips.
> +
> config PHY_QCOM_QMP_PCIE
> tristate "Qualcomm QMP PCIe PHY Driver"
> depends on PCI || COMPILE_TEST
> diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
> index de3dc9ccf067..b877d86ea0b1 100644
> --- a/drivers/phy/qualcomm/Makefile
> +++ b/drivers/phy/qualcomm/Makefile
> @@ -6,7 +6,12 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
>
> +phy-qcom-qmp-hdmi-y := \
> + phy-qcom-qmp-hdmi-base.o \
> + phy-qcom-qmp-hdmi-msm8996.o \
> +
> obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o
> +obj-$(CONFIG_PHY_QCOM_QMP_HDMI) += phy-qcom-qmp-hdmi.o
> obj-$(CONFIG_PHY_QCOM_QMP_PCIE) += phy-qcom-qmp-pcie.o
> obj-$(CONFIG_PHY_QCOM_QMP_PCIE_8996) += phy-qcom-qmp-pcie-msm8996.o
> obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
> new file mode 100644
> index 000000000000..08132b3f82af
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Linaro Ltd.
> + */
> +
> +#include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#include "phy-qcom-qmp-hdmi.h"
> +
> +int qmp_hdmi_phy_init(struct phy *phy)
> +{
> + struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> +
> + return pm_runtime_resume_and_get(hdmi_phy->dev);
> +}
> +
> +int qmp_hdmi_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_hdmi *hdmi_opts = &opts->hdmi;
> + struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
wrong alignment
> + int ret = 0;
> +
> + memcpy(&hdmi_phy->hdmi_opts, hdmi_opts, sizeof(*hdmi_opts));
> +
> + return ret;
drop ret, and return 0 here?
> +}
> +
> +int qmp_hdmi_phy_exit(struct phy *phy)
> +{
> + struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> +
> + pm_runtime_put_noidle(hdmi_phy->dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qmp_hdmi_runtime_resume(struct device *dev)
> +{
> + struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> + if (ret)
> + return ret;
> +
> + ret = clk_bulk_prepare_enable(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> + if (ret)
> + goto out_disable_supplies;
> +
> + return 0;
> +
> +out_disable_supplies:
> + regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +
> + return ret;
> +}
> +
> +static int __maybe_unused qmp_hdmi_runtime_suspend(struct device *dev)
> +{
> + struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
> +
> + clk_bulk_disable_unprepare(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> + regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +
> + return 0;
> +}
> +
> +static int qmp_hdmi_probe(struct platform_device *pdev)
> +{
> + struct clk_init_data init = {
> + .name = "hdmipll",
> + .parent_data = (const struct clk_parent_data[]) {
> + { .fw_name = "xo", .name = "xo_board" },
> + },
> + .flags = CLK_GET_RATE_NOCACHE,
> + .num_parents = 1,
> + };
> + const struct qmp_hdmi_cfg *cfg = of_device_get_match_data(&pdev->dev);
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct qmp_hdmi_phy *hdmi_phy;
> + int ret, i;
> +
> + hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
> + if (!hdmi_phy)
> + return -ENOMEM;
> +
> + hdmi_phy->dev = dev;
> +
> + hdmi_phy->serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(hdmi_phy->serdes))
> + return PTR_ERR(hdmi_phy->serdes);
> +
> + for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
> + hdmi_phy->tx[i] = devm_platform_ioremap_resource(pdev, 1 + i);
> + if (IS_ERR(hdmi_phy->tx[i]))
> + return PTR_ERR(hdmi_phy->tx[i]);
> + }
> +
> + hdmi_phy->phy_reg = devm_platform_ioremap_resource(pdev, 5);
> + if (IS_ERR(hdmi_phy->phy_reg))
> + return PTR_ERR(hdmi_phy->phy_reg);
> +
> + hdmi_phy->clks[0].id = "iface";
> + hdmi_phy->clks[1].id = "ref";
> + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> + if (ret)
> + return ret;
> +
> + hdmi_phy->supplies[0].supply = "vddio";
> + hdmi_phy->supplies[0].init_load_uA = 100000;
> + hdmi_phy->supplies[1].supply = "vcca";
> + hdmi_phy->supplies[1].init_load_uA = 10000;
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, hdmi_phy);
> +
> + ret = devm_pm_runtime_enable(&pdev->dev);
> + if (ret)
> + return ret;
> +
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret)
> + return ret;
> +
> + init.ops = cfg->pll_ops;
> + hdmi_phy->pll_hw.init = &init;
> + ret = devm_clk_hw_register(hdmi_phy->dev, &hdmi_phy->pll_hw);
> + if (ret)
> + goto err;
> +
> + ret = devm_of_clk_add_hw_provider(hdmi_phy->dev, of_clk_hw_simple_get, &hdmi_phy->pll_hw);
> + if (ret)
> + goto err;
> +
> + hdmi_phy->phy = devm_phy_create(dev, pdev->dev.of_node, cfg->phy_ops);
> + if (IS_ERR(hdmi_phy->phy)) {
> + ret = PTR_ERR(hdmi_phy->phy);
> + goto err;
> + }
> +
> + phy_set_drvdata(hdmi_phy->phy, hdmi_phy);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + pm_runtime_put_noidle(&pdev->dev);
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err:
> + pm_runtime_put_noidle(&pdev->dev);
> + return ret;
> +}
> +
> +static const struct of_device_id qmp_hdmi_of_match_table[] = {
> + {
> + .compatible = "qcom,hdmi-phy-8996", .data = &qmp_hdmi_8996_cfg,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qmp_hdmi_of_match_table);
> +
> +DEFINE_RUNTIME_DEV_PM_OPS(qmp_hdmi_pm_ops,
> + qmp_hdmi_runtime_suspend,
> + qmp_hdmi_runtime_resume,
> + NULL);
> +
> +static struct platform_driver qmp_hdmi_driver = {
> + .probe = qmp_hdmi_probe,
> + .driver = {
> + .name = "qcom-qmp-hdmi-phy",
> + .of_match_table = qmp_hdmi_of_match_table,
> + .pm = &qmp_hdmi_pm_ops,
> + },
> +};
> +
> +module_platform_driver(qmp_hdmi_driver);
> +
> +MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov at linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP HDMI PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
> new file mode 100644
> index 000000000000..27ffa70d0faa
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
> @@ -0,0 +1,441 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Linaro Ltd.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/phy/phy.h>
> +
> +#include "phy-qcom-qmp-hdmi.h"
> +#include "phy-qcom-qmp-qserdes-com.h"
> +#include "phy-qcom-qmp-qserdes-txrx.h"
> +
> +#define HDMI_VCO_MAX_FREQ 12000000000UL
> +#define HDMI_VCO_MIN_FREQ 8000000000UL
I prefer using 12 * GIGA etc to define these
> +static int qmp_hdmi_8996_phy_set_rate(struct qmp_hdmi_phy *hdmi_phy)
> +{
> + unsigned long parent_rate = HDMI_DEFAULT_REF_CLOCK;
> + unsigned long rate = hdmi_phy->hdmi_opts.pixel_clk_rate * 1000;
> + struct qmp_hdmi_8996_post_divider pd;
> + bool gen_ssc = false;
> + u64 bclk;
> + u64 dec_start;
> + u64 frac_start;
> + u64 fdata;
> + u32 pll_divisor;
> + u32 rem;
> + u32 integloop_gain;
> + u32 pll_cmp;
> + int i, ret;
> +
> + bclk = ((u64)rate) * 10;
> + ret = qmp_hdmi_8996_pll_get_post_div(&pd, bclk);
> + if (ret) {
> + dev_err(hdmi_phy->dev, "PLL calculation failed\n");
> + return ret;
> + }
> +
> + dec_start = pd.vco_freq;
> + pll_divisor = 4 * parent_rate;
> + do_div(dec_start, pll_divisor);
> +
> + frac_start = pd.vco_freq * (1 << 20);
> +
> + rem = do_div(frac_start, pll_divisor);
> + frac_start -= dec_start * (1 << 20);
> + if (rem > (pll_divisor >> 1))
> + frac_start++;
> +
> + fdata = pd.vco_freq;
> + do_div(fdata, pd.vco_ratio);
> +
> + pll_cmp = qmp_hdmi_8996_pll_get_pll_cmp(fdata, parent_rate);
> +
> + /* Initially shut down PHY */
> + dev_dbg(hdmi_phy->dev, "Disabling PHY");
> + hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x0);
> + udelay(500);
> +
> + /* Power up sequence */
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x04);
> +
> + hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x1);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_RESETSM_CNTRL, 0x20);
> + hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL, 0x0f);
> + hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL, 0x0f);
> +
> + hdmi_tx_chan_write(hdmi_phy, 0, QSERDES_TX_LANE_MODE, 0x43);
> + hdmi_tx_chan_write(hdmi_phy, 2, QSERDES_TX_LANE_MODE, 0x43);
> +
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1e);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x07);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_EN_SEL, 0x37);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_SYS_CLK_CTRL, 0x02);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_ENABLE1, 0x0e);
> +
> + if (frac_start != 0 || gen_ssc) {
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x28);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0,
> + 11000000 / (parent_rate/ 20));
> + integloop_gain = (64 * parent_rate) / HDMI_DEFAULT_REF_CLOCK;
> + } else {
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x01);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x10);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0, 0x23);
> + integloop_gain = (1022 * parent_rate) / (100 * 1000 * 1000);
> + }
> +
> + /* Bypass VCO calibration */
> + if (bclk > HDMI_DIG_FREQ_BIT_CLK_THRESHOLD) {
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 1);
> + integloop_gain <<= 1;
> + } else {
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 2);
> + integloop_gain <<= 2;
> + }
> +
> + integloop_gain = min_t(u32, integloop_gain, 2046);
> +
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_TRIM, 0x0f);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_IVCO, 0x0f);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_VCO_TUNE_CTRL, 0);
> +
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x06);
> +
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_SELECT, 0x30);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_HSCLK_SEL, 0x20 | pd.hsclk_divsel);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP_EN, 0x0);
> +
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_DEC_START_MODE0, dec_start);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START1_MODE0,
> + frac_start & 0xff);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START2_MODE0,
> + (frac_start >> 8) & 0xff);
> + hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START3_MODE0,
> + (frac_start >> 16) & 0xf);
FIELD_{PREP|GET} please
> +static int qmp_hdmi_8996_phy_power_on(struct phy *phy)
> +{
> + struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> + u32 status;
> + int i, ret = 0;
superfluous init for ret
--
~Vinod
More information about the Freedreno
mailing list