[Freedreno] [PATCH v1 2/5] drm/msm/dp: incorporate pm_runtime framework into DP driver
Kuogee Hsieh
quic_khsieh at quicinc.com
Tue Jul 25 22:25:48 UTC 2023
On 7/10/2023 9:22 AM, Kuogee Hsieh wrote:
>
> On 7/8/2023 7:52 PM, Bjorn Andersson wrote:
>> On Fri, Jul 07, 2023 at 04:52:20PM -0700, Kuogee Hsieh wrote:
>>> Incorporating pm runtime framework into DP driver so that power
>>> and clock resource handling can be centralized allowing easier
>>> control of these resources in preparation of registering aux bus
>>> uring probe.
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>>> ---
>>> drivers/gpu/drm/msm/dp/dp_aux.c | 3 ++
>>> drivers/gpu/drm/msm/dp/dp_display.c | 75
>>> +++++++++++++++++++++++++++++--------
>>> 2 files changed, 63 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>>> b/drivers/gpu/drm/msm/dp/dp_aux.c
>>> index 8e3b677..c592064 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>>> @@ -291,6 +291,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>>> *dp_aux,
>>> return -EINVAL;
>>> }
>>> + pm_runtime_get_sync(dp_aux->dev);
>>> mutex_lock(&aux->mutex);
>>> if (!aux->initted) {
>>> ret = -EIO;
>>> @@ -364,6 +365,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>>> *dp_aux,
>>> exit:
>>> mutex_unlock(&aux->mutex);
>>> + pm_runtime_mark_last_busy(dp_aux->dev);
>>> + pm_runtime_put_autosuspend(dp_aux->dev);
>>> return ret;
>>> }
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>>> b/drivers/gpu/drm/msm/dp/dp_display.c
>>> index 76f1395..2c5706a 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>>> @@ -309,6 +309,10 @@ static int dp_display_bind(struct device *dev,
>>> struct device *master,
>>> goto end;
>>> }
>>> + pm_runtime_enable(dev);
>>> + pm_runtime_set_autosuspend_delay(dev, 1000);
>>> + pm_runtime_use_autosuspend(dev);
>>> +
>>> return 0;
>>> end:
>>> return rc;
>>> @@ -320,9 +324,8 @@ static void dp_display_unbind(struct device
>>> *dev, struct device *master,
>>> struct dp_display_private *dp = dev_get_dp_display_private(dev);
>>> struct msm_drm_private *priv = dev_get_drvdata(master);
>>> - /* disable all HPD interrupts */
>>> - if (dp->core_initialized)
>>> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK,
>>> false);
>>> + pm_runtime_dont_use_autosuspend(dev);
>>> + pm_runtime_disable(dev);
>>> kthread_stop(dp->ev_tsk);
>>> @@ -466,10 +469,12 @@ static void dp_display_host_init(struct
>>> dp_display_private *dp)
>>> dp->dp_display.connector_type, dp->core_initialized,
>>> dp->phy_initialized);
>>> - dp_power_init(dp->power);
>>> - dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
>>> - dp_aux_init(dp->aux);
>>> - dp->core_initialized = true;
>>> + if (!dp->core_initialized) {
>>> + dp_power_init(dp->power);
>>> + dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
>>> + dp_aux_init(dp->aux);
>>> + dp->core_initialized = true;
>> There are two cases that queries core_initialized, both of those are
>> done to avoid accessing the DP block without it first being powered up.
>> With the introduction of runtime PM, it seems reasonable to just power
>> up the block in those two code paths (and remove the variable).
>>
>>> + }
>>> }
>>> static void dp_display_host_deinit(struct dp_display_private *dp)
>>> @@ -478,10 +483,12 @@ static void dp_display_host_deinit(struct
>>> dp_display_private *dp)
>>> dp->dp_display.connector_type, dp->core_initialized,
>>> dp->phy_initialized);
>>> - dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
>>> - dp_aux_deinit(dp->aux);
>>> - dp_power_deinit(dp->power);
>>> - dp->core_initialized = false;
>>> + if (dp->core_initialized) {
>>> + dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
>>> + dp_aux_deinit(dp->aux);
>>> + dp_power_deinit(dp->power);
>>> + dp->core_initialized = false;
>>> + }
>>> }
>>> static int dp_display_usbpd_configure_cb(struct device *dev)
>>> @@ -1304,6 +1311,39 @@ static int dp_display_remove(struct
>>> platform_device *pdev)
>>> dp_display_deinit_sub_modules(dp);
>>> platform_set_drvdata(pdev, NULL);
>>> + pm_runtime_put_sync_suspend(&pdev->dev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dp_pm_runtime_suspend(struct device *dev)
>>> +{
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> + struct msm_dp *dp_display = platform_get_drvdata(pdev);
>> platform_get_drvdata() is a wrapper for dev_get_drvdata(&pdev->dev), so
>> there's no need to resolve the platform_device first...
>>
>>> + struct dp_display_private *dp;
>>> +
>>> + dp = container_of(dp_display, struct dp_display_private,
>>> dp_display);
>>> +
>>> + dp_display_host_phy_exit(dp);
>>> + dp_catalog_ctrl_hpd_enable(dp->catalog);
>>> + dp_display_host_deinit(dp);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dp_pm_runtime_resume(struct device *dev)
>>> +{
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> + struct msm_dp *dp_display = platform_get_drvdata(pdev);
>>> + struct dp_display_private *dp;
>>> +
>>> + dp = container_of(dp_display, struct dp_display_private,
>>> dp_display);
>>> +
>>> + dp_display_host_init(dp);
>>> + if (dp_display->is_edp) {
>>> + dp_catalog_ctrl_hpd_enable(dp->catalog);
>>> + dp_display_host_phy_init(dp);
>>> + }
>>> return 0;
>>> }
>>> @@ -1409,6 +1449,7 @@ static int dp_pm_suspend(struct device *dev)
>>> }
>>> static const struct dev_pm_ops dp_pm_ops = {
>>> + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume,
>>> NULL)
>>> .suspend = dp_pm_suspend,
>>> .resume = dp_pm_resume,
>>> };
>>> @@ -1493,10 +1534,6 @@ static int dp_display_get_next_bridge(struct
>>> msm_dp *dp)
>>> aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>>> if (aux_bus && dp->is_edp) {
>>> - dp_display_host_init(dp_priv);
>>> - dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
>>> - dp_display_host_phy_init(dp_priv);
>> I'm probably just missing it, but how do we get here with the host
>> powered up and the phy initialized?
>
> if (!dp->core_initialized) is at dp_display_host_init()
>
>>
>>> -
>>> /*
>>> * The code below assumes that the panel will finish probing
>>> * by the time devm_of_dp_aux_populate_ep_devices() returns.
>>> @@ -1604,6 +1641,7 @@ void dp_bridge_atomic_enable(struct drm_bridge
>>> *drm_bridge,
>>> dp_hpd_plug_handle(dp_display, 0);
>>> mutex_lock(&dp_display->event_mutex);
>>> + pm_runtime_get_sync(&dp_display->pdev->dev);
>>> state = dp_display->hpd_state;
>>> if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
>>> @@ -1684,6 +1722,8 @@ void dp_bridge_atomic_post_disable(struct
>>> drm_bridge *drm_bridge,
>>> }
>>> drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
>>> +
>>> + pm_runtime_put_sync(&dp_display->pdev->dev);
>>> mutex_unlock(&dp_display->event_mutex);
>>> }
>>> @@ -1723,6 +1763,8 @@ void dp_bridge_hpd_enable(struct drm_bridge
>>> *bridge)
>>> struct dp_display_private *dp = container_of(dp_display,
>>> struct dp_display_private, dp_display);
>>> mutex_lock(&dp->event_mutex);
>>> + pm_runtime_get_sync(&dp->pdev->dev);
>>> +
>>> dp_catalog_ctrl_hpd_enable(dp->catalog);
>>> /* enable HDP interrupts */
>>> @@ -1744,6 +1786,9 @@ void dp_bridge_hpd_disable(struct drm_bridge
>>> *bridge)
>>> dp_catalog_ctrl_hpd_disable(dp->catalog);
>>> dp_display->internal_hpd = false;
>>> +
>>> + pm_runtime_mark_last_busy(&dp->pdev->dev);
>>> + pm_runtime_put_autosuspend(&dp->pdev->dev);
>>> mutex_unlock(&dp->event_mutex);
>>> }
>> The runtime_get/put in dp_bridge_hpd_enable() and disable matches my
>> expectations. But in the case that we have an external HPD source, where
>> will the power be turned on?
>>
>> Note that you can test this on your device by routing the HPD GPIO to a
>> display-connector instance and wiring this to the DP node. In the same
>> way it's done here:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/qcom/sa8295p-adp.dts#n28
>>
at sc7280, gpio-47 has function 2 as dp-hot-plug pin. but it does not
has function for general purpose pin.
Just curious, to work with external HPD source,
1) which DRM_BRIDGE_OP_xxx should be used for bridge->ops?
2) are both .hpd_enable and .hpd_disable have to be populated?
>>
>> Regards,
>> Bjorn
>>
>>> --
>>> 2.7.4
>>>
More information about the Freedreno
mailing list