[Freedreno] [PATCH v2 01/13] drm/msm/dpu: cleanup dpu_kms_hw_init error path
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun Jul 30 01:15:20 UTC 2023
On 15/07/2023 00:43, Jessica Zhang wrote:
>
>
> On 7/7/2023 4:12 PM, Dmitry Baryshkov wrote:
>> It was noticed that dpu_kms_hw_init()'s error path contains several
>> labels which point to the same code path. Replace all of them with a
>> single label.
>>
>> Suggested-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 +++++++++------------
>> 1 file changed, 9 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index c11b3ab572ab..e7ac02e92f42 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1037,7 +1037,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> if (!dpu_kms->catalog) {
>> DPU_ERROR("device config not known!\n");
>> rc = -EINVAL;
>> - goto power_error;
>> + goto err_pm_put;
>> }
>> /*
>> @@ -1047,13 +1047,13 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> rc = _dpu_kms_mmu_init(dpu_kms);
>> if (rc) {
>> DPU_ERROR("dpu_kms_mmu_init failed: %d\n", rc);
>> - goto power_error;
>> + goto err_pm_put;
>> }
>> rc = dpu_rm_init(&dpu_kms->rm, dpu_kms->catalog, dpu_kms->mmio);
>> if (rc) {
>> DPU_ERROR("rm init failed: %d\n", rc);
>> - goto power_error;
>> + goto err_pm_put;
>> }
>> dpu_kms->rm_init = true;
>> @@ -1065,7 +1065,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> rc = PTR_ERR(dpu_kms->hw_mdp);
>> DPU_ERROR("failed to get hw_mdp: %d\n", rc);
>> dpu_kms->hw_mdp = NULL;
>> - goto power_error;
>> + goto err_pm_put;
>> }
>> for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
>> @@ -1076,7 +1076,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> if (IS_ERR(hw)) {
>> rc = PTR_ERR(hw);
>> DPU_ERROR("failed to init vbif %d: %d\n", vbif->id, rc);
>> - goto power_error;
>> + goto err_pm_put;
>> }
>> dpu_kms->hw_vbif[vbif->id] = hw;
>> @@ -1092,7 +1092,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf,
>> max_core_clk_rate);
>> if (rc) {
>> DPU_ERROR("failed to init perf %d\n", rc);
>> - goto perf_err;
>> + goto err_pm_put;
>> }
>> dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio,
>> dpu_kms->catalog);
>> @@ -1100,7 +1100,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> rc = PTR_ERR(dpu_kms->hw_intr);
>> DPU_ERROR("hw_intr init failed: %d\n", rc);
>> dpu_kms->hw_intr = NULL;
>> - goto hw_intr_init_err;
>> + goto err_pm_put;
>> }
>> dev->mode_config.min_width = 0;
>> @@ -1125,7 +1125,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> rc = _dpu_kms_drm_obj_init(dpu_kms);
>> if (rc) {
>> DPU_ERROR("modeset init failed: %d\n", rc);
>> - goto drm_obj_init_err;
>> + goto err_pm_put;
>> }
>> dpu_vbif_init_memtypes(dpu_kms);
>> @@ -1134,10 +1134,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>> return 0;
>> -drm_obj_init_err:
>
> Hey Dmitry,
>
> The change itself LGTM -- however, it seems that there's a dependency on
> the core perf cleanup series that wasn't listed in the cover letter.
Yes. And unfortunately a dependency on
https://patchwork.freedesktop.org/series/105392/
>
> Thanks,
>
> Jessica Zhang
>
>> -hw_intr_init_err:
>> -perf_err:
>> -power_error:
>> +err_pm_put:
>> pm_runtime_put_sync(&dpu_kms->pdev->dev);
>> error:
>> _dpu_kms_hw_destroy(dpu_kms);
>> --
>> 2.39.2
>>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list