[Freedreno] [PATCH] drm/msm/dpu: Configure DP INTF/PHY selector

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Jun 12 22:31:40 UTC 2023


On 13/06/2023 01:10, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson at linaro.org>
> 
> Some platforms provides a mechanism for configuring the mapping between
> (one or two) DisplayPort intfs and their PHYs.
> 
> In particular SC8180X provides this functionality, without a default
> configuration, resulting in no connection between its two external
> DisplayPort controllers and any PHYs.
> 
> The change implements the logic for optionally configuring which phy
> each of the intfs should be connected to, provides a new entry in the
> DPU catalog for specifying how many intfs to configure and marks the
> SC8180X DPU to program 2 entries.
> 
> For now the request is simply to program the mapping 1:1, any support
> for alternative mappings is left until the use case arrise.
> 
> Note that e.g. msm-4.14 unconditionally maps intf 0 to phy 0 on all
> rlatforms, so perhaps this is needed in order to get DisplayPort working
> on some other platforms as well.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
> ---
>   .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h   |  1 +
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  2 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    | 23 +++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h    |  8 +++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h      |  1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 10 ++++++++
>   6 files changed, 45 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> index 8ed2b263c5ea..9da952692a69 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> @@ -19,6 +19,7 @@ static const struct dpu_caps sc8180x_dpu_caps = {
>   	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>   	.max_hdeci_exp = MAX_HORZ_DECIMATION,
>   	.max_vdeci_exp = MAX_VERT_DECIMATION,
> +	.num_dp_intf_sel = 2,
>   };
>   
>   static const struct dpu_ubwc_cfg sc8180x_ubwc_cfg = {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index ac4a9e73705c..4cb8d096d8ec 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -357,6 +357,7 @@ struct dpu_rotation_cfg {
>    * @pixel_ram_size     size of latency hiding and de-tiling buffer in bytes
>    * @max_hdeci_exp      max horizontal decimation supported (max is 2^value)
>    * @max_vdeci_exp      max vertical decimation supported (max is 2^value)
> + * @num_dp_intf_sel    number of DP intfs to configure PHY selection for
>    */
>   struct dpu_caps {
>   	u32 max_mixer_width;
> @@ -371,6 +372,7 @@ struct dpu_caps {
>   	u32 pixel_ram_size;
>   	u32 max_hdeci_exp;
>   	u32 max_vdeci_exp;
> +	u32 num_dp_intf_sel;
>   };
>   
>   /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> index 963bdb5e0252..5afa99cb148c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> @@ -250,6 +250,27 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
>   	DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
>   }
>   
> +static void dpu_hw_dp_phy_intf_sel(struct dpu_hw_mdp *mdp, unsigned int *phys,
> +				   unsigned int num_intfs)
> +{
> +	struct dpu_hw_blk_reg_map *c = &mdp->hw;
> +	unsigned int intf;
> +	u32 sel = 0;
> +
> +	if (!num_intfs)
> +		return;
> +
> +	for (intf = 0; intf < num_intfs; intf++) {
> +		/* Specify the PHY (1-indexed) for @intf */
> +		sel |= (phys[intf] + 1) << (intf * 3);
> +
> +		/* Specify the @intf (1-indexed) of targeted PHY */
> +		sel |= (intf + 1) << (6 + phys[intf] * 3);

 From what I can see, phys[intf] is const. What about defining indexed 
masks instead?

> +	}
> +
> +	DPU_REG_WRITE(c, DP_PHY_INTF_SEL, sel);
> +}
> +
>   static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>   		unsigned long cap)
>   {
> @@ -264,6 +285,8 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>   
>   	ops->get_safe_status = dpu_hw_get_safe_status;
>   
> +	ops->dp_phy_intf_sel = dpu_hw_dp_phy_intf_sel;

Should this be gated for DPU < 4.0? Or 5.0?

> +
>   	if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>   		ops->intf_audio_select = dpu_hw_intf_audio_select;
>   }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> index a1a9e44bed36..8446d74d59b0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> @@ -125,6 +125,14 @@ struct dpu_hw_mdp_ops {
>   	void (*get_safe_status)(struct dpu_hw_mdp *mdp,
>   			struct dpu_danger_safe_status *status);
>   
> +	/**
> +	 * dp_phy_intf_sel - configure intf to phy mapping
> +	 * @mdp: mdp top context driver
> +	 * @phys: list of phys the @num_intfs intfs should be connected to
> +	 * @num_intfs: number of intfs to configure
> +	 */
> +	void (*dp_phy_intf_sel)(struct dpu_hw_mdp *mdp, unsigned int *phys,
> +			        unsigned int num_intfs);
>   	/**
>   	 * intf_audio_select - select the external interface for audio
>   	 * @mdp: mdp top context driver
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> index 5acd5683d25a..6d31bdc7269c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> @@ -59,6 +59,7 @@
>   #define MDP_WD_TIMER_4_CTL2             0x444
>   #define MDP_WD_TIMER_4_LOAD_VALUE       0x448
>   #define DCE_SEL                         0x450
> +#define DP_PHY_INTF_SEL                 0x460

MDP_DP_PHY_INTF_SEL, if you don't mind.

>   
>   #define MDP_PERIPH_TOP0			MDP_WD_TIMER_0_CTL
>   #define MDP_PERIPH_TOP0_END		CLK_CTRL3
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index aa8499de1b9f..5dbe5d164c01 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1011,6 +1011,14 @@ unsigned long dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
>   	return clk_get_rate(clk);
>   }
>   
> +static void dpu_kms_dp_phy_intf_sel(struct dpu_kms *dpu_kms)
> +{
> +	const unsigned int num_intfs = dpu_kms->catalog->caps->num_dp_intf_sel;
> +	static unsigned int phy_map[] = {0, 1, 2};

Please move this to dp_phy_intf_sel() and make it const.

> +
> +	dpu_kms->hw_mdp->ops.dp_phy_intf_sel(dpu_kms->hw_mdp, phy_map, num_intfs);
> +}
> +
>   static int dpu_kms_hw_init(struct msm_kms *kms)
>   {
>   	struct dpu_kms *dpu_kms;
> @@ -1122,6 +1130,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>   		goto perf_err;
>   	}
>   
> +	dpu_kms_dp_phy_intf_sel(dpu_kms);
> +
>   	dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
>   	if (IS_ERR_OR_NULL(dpu_kms->hw_intr)) {
>   		rc = PTR_ERR(dpu_kms->hw_intr);

-- 
With best wishes
Dmitry



More information about the Freedreno mailing list