[Freedreno] [PATCH 6/7] phy: qcom: qmp-combo: drop qmp_v6_dp_aux_init()

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed Jun 21 15:27:18 UTC 2023


The only difference between qmp_v6_dp_aux_init() and
qmp_v4_dp_aux_init() is the address of COM_BIAS_EN_CLKBUFLR_EN register.
Move it to register layout and drop the duplicate function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 44 +++++++----------------
 1 file changed, 12 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 80a5bebf86a2..ab6cfa02ecf9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -110,6 +110,7 @@ enum qphy_reg_layout {
 	QPHY_COM_RESETSM_CNTRL,
 	QPHY_COM_C_READY_STATUS,
 	QPHY_COM_CMN_STATUS,
+	QPHY_COM_BIAS_EN_CLKBUFLR_EN,
 
 	QPHY_DP_PHY_STATUS,
 
@@ -134,6 +135,7 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_RESETSM_CNTRL]	= QSERDES_V3_COM_RESETSM_CNTRL,
 	[QPHY_COM_C_READY_STATUS]	= QSERDES_V3_COM_C_READY_STATUS,
 	[QPHY_COM_CMN_STATUS]		= QSERDES_V3_COM_CMN_STATUS,
+	[QPHY_COM_BIAS_EN_CLKBUFLR_EN]	= QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN,
 
 	[QPHY_DP_PHY_STATUS]		= QSERDES_V3_DP_PHY_STATUS,
 
@@ -157,6 +159,7 @@ static const unsigned int qmp_v45_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_RESETSM_CNTRL]	= QSERDES_V4_COM_RESETSM_CNTRL,
 	[QPHY_COM_C_READY_STATUS]	= QSERDES_V4_COM_C_READY_STATUS,
 	[QPHY_COM_CMN_STATUS]		= QSERDES_V4_COM_CMN_STATUS,
+	[QPHY_COM_BIAS_EN_CLKBUFLR_EN]	= QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN,
 
 	[QPHY_DP_PHY_STATUS]		= QSERDES_V4_DP_PHY_STATUS,
 
@@ -180,6 +183,7 @@ static const unsigned int qmp_v5_5nm_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_RESETSM_CNTRL]	= QSERDES_V5_COM_RESETSM_CNTRL,
 	[QPHY_COM_C_READY_STATUS]	= QSERDES_V5_COM_C_READY_STATUS,
 	[QPHY_COM_CMN_STATUS]		= QSERDES_V5_COM_CMN_STATUS,
+	[QPHY_COM_BIAS_EN_CLKBUFLR_EN]	= QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN,
 
 	[QPHY_DP_PHY_STATUS]		= QSERDES_V5_DP_PHY_STATUS,
 
@@ -203,6 +207,7 @@ static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_RESETSM_CNTRL]	= QSERDES_V6_COM_RESETSM_CNTRL,
 	[QPHY_COM_C_READY_STATUS]	= QSERDES_V6_COM_C_READY_STATUS,
 	[QPHY_COM_CMN_STATUS]		= QSERDES_V6_COM_CMN_STATUS,
+	[QPHY_COM_BIAS_EN_CLKBUFLR_EN]	= QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN,
 
 	[QPHY_DP_PHY_STATUS]		= QSERDES_V6_DP_PHY_STATUS,
 
@@ -1433,8 +1438,6 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp);
 static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp);
 static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp);
 
-static void qmp_v6_dp_aux_init(struct qmp_combo *qmp);
-
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
 {
 	u32 reg;
@@ -1870,7 +1873,7 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 	.swing_hbr3_hbr2	= &qmp_dp_v5_voltage_swing_hbr3_hbr2,
 	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
 
-	.dp_aux_init		= qmp_v6_dp_aux_init,
+	.dp_aux_init		= qmp_v4_dp_aux_init,
 	.configure_dp_tx	= qmp_v4_configure_dp_tx,
 	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
@@ -1945,6 +1948,8 @@ static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
 
 static void qmp_v3_dp_aux_init(struct qmp_combo *qmp)
 {
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+
 	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
 	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
 	       qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
@@ -1952,7 +1957,7 @@ static void qmp_v3_dp_aux_init(struct qmp_combo *qmp)
 	/* Turn on BIAS current for PHY/PLL */
 	writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
 	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
-	       qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+	       qmp->dp_serdes + cfg->regs[QPHY_COM_BIAS_EN_CLKBUFLR_EN]);
 
 	writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
 
@@ -1966,7 +1971,7 @@ static void qmp_v3_dp_aux_init(struct qmp_combo *qmp)
 	       QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
 	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
 	       QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
-	       qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+	       qmp->dp_serdes + cfg->regs[QPHY_COM_BIAS_EN_CLKBUFLR_EN]);
 
 	writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG0);
 	writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
@@ -2162,39 +2167,14 @@ static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp)
 
 static void qmp_v4_dp_aux_init(struct qmp_combo *qmp)
 {
-	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
-	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
-	       qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
-
-	/* Turn on BIAS current for PHY/PLL */
-	writel(0x17, qmp->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
-	writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG0);
-	writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
-	writel(0xa4, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG2);
-	writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG3);
-	writel(0x0a, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG4);
-	writel(0x26, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG5);
-	writel(0x0a, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG6);
-	writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG7);
-	writel(0xb7, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG8);
-	writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG9);
-	qmp->dp_aux_cfg = 0;
-
-	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
-	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
-	       PHY_AUX_REQ_ERR_MASK,
-	       qmp->dp_dp_phy + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
-}
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
 
-static void qmp_v6_dp_aux_init(struct qmp_combo *qmp)
-{
 	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
 	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
 	       qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
 
 	/* Turn on BIAS current for PHY/PLL */
-	writel(0x17, qmp->dp_serdes + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+	writel(0x17, qmp->dp_serdes + cfg->regs[QPHY_COM_BIAS_EN_CLKBUFLR_EN]);
 
 	writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG0);
 	writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
-- 
2.39.2



More information about the Freedreno mailing list