[Freedreno] [PATCH v2] drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
Abhinav Kumar
quic_abhinavk at quicinc.com
Sat Mar 11 21:18:11 UTC 2023
Hi Adam
On 3/11/2023 9:28 AM, Adam Ford wrote:
> On Thu, Oct 13, 2022 at 3:39 AM Robert Foss <robert.foss at linaro.org> wrote:
>>
>> On Tue, 11 Oct 2022 at 23:11, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>>>
>>> adv7533 bridge tries to dynamically switch lanes based on the
>>> mode by detaching and attaching the mipi dsi device.
>>>
>>> This approach is incorrect because this method of dynamic switch of
>>> detaching and attaching the mipi dsi device also results in removing
>>> and adding the component which is not necessary.
>>>
>>> This approach is also prone to deadlocks. So for example, on the
>>> db410c whenever this path is executed with lockdep enabled,
>>> this results in a deadlock due to below ordering of locks.
>>>
>>> -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
>>> lock_acquire+0x6c/0x90
>>> drm_modeset_acquire_init+0xf4/0x150
>>> drmm_mode_config_init+0x220/0x770
>>> msm_drm_bind+0x13c/0x654
>>> try_to_bring_up_aggregate_device+0x164/0x1d0
>>> __component_add+0xa8/0x174
>>> component_add+0x18/0x2c
>>> dsi_dev_attach+0x24/0x30
>>> dsi_host_attach+0x98/0x14c
>>> devm_mipi_dsi_attach+0x38/0xb0
>>> adv7533_attach_dsi+0x8c/0x110
>>> adv7511_probe+0x5a0/0x930
>>> i2c_device_probe+0x30c/0x350
>>> really_probe.part.0+0x9c/0x2b0
>>> __driver_probe_device+0x98/0x144
>>> driver_probe_device+0xac/0x14c
>>> __device_attach_driver+0xbc/0x124
>>> bus_for_each_drv+0x78/0xd0
>>> __device_attach+0xa8/0x1c0
>>> device_initial_probe+0x18/0x24
>>> bus_probe_device+0xa0/0xac
>>> deferred_probe_work_func+0x90/0xd0
>>> process_one_work+0x28c/0x6b0
>>> worker_thread+0x240/0x444
>>> kthread+0x110/0x114
>>> ret_from_fork+0x10/0x20
>>>
>>> -> #0 (component_mutex){+.+.}-{3:3}:
>>> __lock_acquire+0x1280/0x20ac
>>> lock_acquire.part.0+0xe0/0x230
>>> lock_acquire+0x6c/0x90
>>> __mutex_lock+0x84/0x400
>>> mutex_lock_nested+0x3c/0x70
>>> component_del+0x34/0x170
>>> dsi_dev_detach+0x24/0x30
>>> dsi_host_detach+0x20/0x64
>>> mipi_dsi_detach+0x2c/0x40
>>> adv7533_mode_set+0x64/0x90
>>> adv7511_bridge_mode_set+0x210/0x214
>>> drm_bridge_chain_mode_set+0x5c/0x84
>>> crtc_set_mode+0x18c/0x1dc
>>> drm_atomic_helper_commit_modeset_disables+0x40/0x50
>>> msm_atomic_commit_tail+0x1d0/0x6e0
>>> commit_tail+0xa4/0x180
>>> drm_atomic_helper_commit+0x178/0x3b0
>>> drm_atomic_commit+0xa4/0xe0
>>> drm_client_modeset_commit_atomic+0x228/0x284
>>> drm_client_modeset_commit_locked+0x64/0x1d0
>>> drm_client_modeset_commit+0x34/0x60
>>> drm_fb_helper_lastclose+0x74/0xcc
>>> drm_lastclose+0x3c/0x80
>>> drm_release+0xfc/0x114
>>> __fput+0x70/0x224
>>> ____fput+0x14/0x20
>>> task_work_run+0x88/0x1a0
>>> do_exit+0x350/0xa50
>>> do_group_exit+0x38/0xa4
>>> __wake_up_parent+0x0/0x34
>>> invoke_syscall+0x48/0x114
>>> el0_svc_common.constprop.0+0x60/0x11c
>>> do_el0_svc+0x30/0xc0
>>> el0_svc+0x58/0x100
>>> el0t_64_sync_handler+0x1b0/0x1bc
>>> el0t_64_sync+0x18c/0x190
>>>
>>> Due to above reasons, remove the dynamic lane switching
>>> code from adv7533 bridge chip and filter out the modes
>>> which would need different number of lanes as compared
>>> to the initialization time using the mode_valid callback.
>>>
>>> This can be potentially re-introduced by using the pre_enable()
>>> callback but this needs to be evaluated first whether such an
>>> approach will work so this will be done with a separate change.
>>>
>>> changes since RFC:
>>> - Fix commit text and add TODO comment
>>>
>>> changes in v2:
>>> - Fix checkpatch formatting errors
>>>
>>> Fixes: 62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
>>> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
>>> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>>> Reviewed-by: Robert Foss <robert.foss at linaro.org>
>>> Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
>>> ---
>>> drivers/gpu/drm/bridge/adv7511/adv7511.h | 3 ++-
>>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 18 ++++++++++++++----
>>> drivers/gpu/drm/bridge/adv7511/adv7533.c | 25 +++++++++++++------------
>>> 3 files changed, 29 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
>>> index a031a0cd1f18..1053d185b24c 100644
>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
>>> @@ -405,7 +405,8 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
>>>
>>> void adv7533_dsi_power_on(struct adv7511 *adv);
>>> void adv7533_dsi_power_off(struct adv7511 *adv);
>>> -void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
>>> +enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>>> + const struct drm_display_mode *mode);
>>> int adv7533_patch_registers(struct adv7511 *adv);
>>> int adv7533_patch_cec_registers(struct adv7511 *adv);
>>> int adv7533_attach_dsi(struct adv7511 *adv);
>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> index 38bf28720f3a..4bc7aac94a16 100644
>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> @@ -697,7 +697,7 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
>>> }
>>>
>>> static enum drm_mode_status adv7511_mode_valid(struct adv7511 *adv7511,
>>> - struct drm_display_mode *mode)
>>> + const struct drm_display_mode *mode)
>>> {
>>> if (mode->clock > 165000)
>>> return MODE_CLOCK_HIGH;
>>> @@ -791,9 +791,6 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
>>> regmap_update_bits(adv7511->regmap, 0x17,
>>> 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
>>>
>>> - if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
>>> - adv7533_mode_set(adv7511, adj_mode);
>>> -
>>> drm_mode_copy(&adv7511->curr_mode, adj_mode);
>>>
>>> /*
>>> @@ -913,6 +910,18 @@ static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
>>> adv7511_mode_set(adv, mode, adj_mode);
>>> }
>>>
>>> +static enum drm_mode_status adv7511_bridge_mode_valid(struct drm_bridge *bridge,
>>> + const struct drm_display_info *info,
>>> + const struct drm_display_mode *mode)
>>> +{
>>> + struct adv7511 *adv = bridge_to_adv7511(bridge);
>>> +
>>> + if (adv->type == ADV7533 || adv->type == ADV7535)
>>> + return adv7533_mode_valid(adv, mode);
>>> + else
>>> + return adv7511_mode_valid(adv, mode);
>>> +}
>>> +
>>> static int adv7511_bridge_attach(struct drm_bridge *bridge,
>>> enum drm_bridge_attach_flags flags)
>>> {
>>> @@ -960,6 +969,7 @@ static const struct drm_bridge_funcs adv7511_bridge_funcs = {
>>> .enable = adv7511_bridge_enable,
>>> .disable = adv7511_bridge_disable,
>>> .mode_set = adv7511_bridge_mode_set,
>>> + .mode_valid = adv7511_bridge_mode_valid,
>>> .attach = adv7511_bridge_attach,
>>> .detect = adv7511_bridge_detect,
>>> .get_edid = adv7511_bridge_get_edid,
>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>>> index ef6270806d1d..258c79d4dab0 100644
>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>>> @@ -100,26 +100,27 @@ void adv7533_dsi_power_off(struct adv7511 *adv)
>>> regmap_write(adv->regmap_cec, 0x27, 0x0b);
>>> }
>>>
>>> -void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode)
>>> +enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>>> + const struct drm_display_mode *mode)
>>> {
>>> + int lanes;
>>> struct mipi_dsi_device *dsi = adv->dsi;
>>> - int lanes, ret;
>>> -
>>> - if (adv->num_dsi_lanes != 4)
>>> - return;
>>>
>>> if (mode->clock > 80000)
>>> lanes = 4;
>>> else
>>> lanes = 3;
>
> I know this thread is a bit old, but I have an i.MX8M Mini with an
> adv7535 HDMI bridge, and I'm able to display video on a 4-lane
> interface with a clock as low as 27000.
>
Looks like this condition is not tracking how low the bridge can support
with 4 lanes but how high you can support with 3 lanes. Thats the issue.
This condition has been this way since the original bridge driver:
drm/bridge: adv7533: Change number of DSI lanes dynamically
Yes, its possible that with 4 lanes you can support a lower rate but
with 3 lanes you cannot support a higher one. So that needs to be handled.
The extra conditional's intention was to make sure that if you try to
switch to a mode which has a different number of lanes than what was set
in the device tree (basically dynamic mode switch) then fail that.
So perhaps this condition can be modified to :
if (num_dsi_lanes < 4 && mode->clock > 80000)
return MODE_BAD;
I think that should fix your issue. You can set the number of lanes to 4
for your board if it supports that using the DT node adi,dsi-lanes.
>>>
>>> - if (lanes != dsi->lanes) {
>>> - mipi_dsi_detach(dsi);
>>> - dsi->lanes = lanes;
>>> - ret = mipi_dsi_attach(dsi);
>>> - if (ret)
>>> - dev_err(&dsi->dev, "failed to change host lanes\n");
>>> - }
>>> + /*
>>> + * TODO: add support for dynamic switching of lanes
>>> + * by using the bridge pre_enable() op . Till then filter
>>> + * out the modes which shall need different number of lanes
>>> + * than what was configured in the device tree.
>>> + */
>>> + if (lanes != dsi->lanes)
>>> + return MODE_BAD;
>>> +
>
> My board doesn't currently support dynamic switching, but I'd like to
> keep 4-lanes all the time. However, this return eliminates several
> resolutions that I can successfully display.
> I'd like to eliminate this error, so it works on the imx8m
> mini/nano/plus, but I am not sure the best approach without breaking
> someone else's board.
> > I was thinking I could add a flag to disable dynamic switching. If
> that flag is set, we'd return MODE_OK here.
>
> Does anyone have any suggestions on an apporach?
>
> adam
>
I am thinking of this solution
if (num_dsi_lanes < 4 && mode->clock > 80000)
return MODE_BAD;
So lets say some user tried to set number of lanes to 3 but tries a mode
needing > 80000 clock then fail.
That way we still dont support dynamic mode switch but also dont limit
the modes which can be supported with 4 lanes.
>
>>> + return MODE_OK;
>>> }
>>>
>>> int adv7533_patch_registers(struct adv7511 *adv)
>>> --
>>> 2.7.4
>>>
>>
>> Applied to drm-misc-next.
More information about the Freedreno
mailing list