[Freedreno] [PATCH v4 4/5] arm64: dts: qcom: sm8450: switch to usb3/dp combo phy

[Konrad Dybcio]

On 9.03.2023 10:19, Neil Armstrong wrote:
> The QMP PHY is a USB3/DP combo phy, switch to the newly
> documented bindings and register the clocks to the GCC
> and DISPCC controllers.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 +++++++++++++-----------------------
>  1 file changed, 15 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1a744a33bcf4..6caa2c8efb46 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/interconnect/qcom,sm8450.h>
>  #include <dt-bindings/soc/qcom,gpr.h>
> @@ -748,7 +749,7 @@ gcc: clock-controller at 100000 {
>  				 <&ufs_mem_phy_lanes 0>,
>  				 <&ufs_mem_phy_lanes 1>,
>  				 <&ufs_mem_phy_lanes 2>,
> -				 <0>;
> +				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>  			clock-names = "bi_tcxo",
>  				      "sleep_clk",
>  				      "pcie_0_pipe_clk",
> @@ -2034,37 +2035,24 @@ usb_1_hsphy: phy at 88e3000 {
>  			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>  		};
>  
> -		usb_1_qmpphy: phy-wrapper at 88e9000 {
> -			compatible = "qcom,sm8450-qmp-usb3-phy";
> -			reg = <0 0x088e9000 0 0x200>,
> -			      <0 0x088e8000 0 0x20>;
> -			status = "disabled";
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +		usb_1_qmpphy: phy at 88e8000 {
> +			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
> +			reg = <0 0x088e8000 0 0x4000>;
>  
>  			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "ref_clk_src", "com_aux";
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
>  
>  			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>  				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
> -			usb_1_ssphy: phy at 88e9200 {
> -				reg = <0 0x088e9200 0 0x200>,
> -				      <0 0x088e9400 0 0x200>,
> -				      <0 0x088e9c00 0 0x400>,
> -				      <0 0x088e9600 0 0x200>,
> -				      <0 0x088e9800 0 0x200>,
> -				      <0 0x088e9a00 0 0x100>;
> -				#phy-cells = <0>;
> -				#clock-cells = <0>;
> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb3_phy_pipe_clk_src";
> -			};
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
> +
> +			status = "disabled";
>  		};
>  
>  		remoteproc_slpi: remoteproc at 2400000 {
> @@ -2972,8 +2960,8 @@ dispcc: clock-controller at af00000 {
>  				 <&mdss_dsi0_phy 1>,
>  				 <&mdss_dsi1_phy 0>,
>  				 <&mdss_dsi1_phy 1>,
> -				 <0>, /* dp0 */
> -				 <0>,
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
>  				 <0>, /* dp1 */
>  				 <0>,
>  				 <0>, /* dp2 */
> @@ -4153,7 +4141,7 @@ usb_1_dwc3: usb at a600000 {
>  				iommus = <&apps_smmu 0x0 0x0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;
> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
>  				phy-names = "usb2-phy", "usb3-phy";
>  			};
>  		};
>