[Freedreno] [v2, 38/50] drm/msm/dpu: enable DSPP_2/3 for LM_2/3 on sm8450

[Dmitry Baryshkov]

On 30/03/2023 15:33, Konrad Dybcio wrote:
> 
> 
> On 12.02.2023 00:12, Dmitry Baryshkov wrote:
>> Mark DSPP_2 and DSPP_3 as used for LM_2 and LM_3
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
> Could you point me to where it's specified downstream? I can't find it.

https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/77276ed6a0055a4a0f41d7b0395a8b0bbcafd091/msm/sde/sde_hw_catalog.c#L2341

Which says assign DSPP to LMs for as long as we have a spare DSPP

> 
> Also, deserves a Fixes.

This is a tough question. We have been using sm8150_lm for sm8[2345]50. 
So before "drm/msm/dpu: duplicate sm8150 catalog entries" there is no 
way to fix that.

> 
> Konrad
>>   drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
>> index a3faaab2226c..3d95f2472e7a 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
>> @@ -107,9 +107,9 @@ static const struct dpu_lm_cfg sm8450_lm[] = {
>>   	LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
>>   		&sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
>>   	LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK,
>> -		&sdm845_lm_sblk, PINGPONG_2, LM_3, 0),
>> +		&sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
>>   	LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK,
>> -		&sdm845_lm_sblk, PINGPONG_3, LM_2, 0),
>> +		&sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
>>   	LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK,
>>   		&sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
>>   	LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK,

-- 
With best wishes
Dmitry