[Freedreno] [PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Mon May 8 10:19:48 UTC 2023
On 08/05/2023 11:43, Konrad Dybcio wrote:
>
>
> On 7.05.2023 22:02, Dmitry Baryshkov wrote:
>> On 06/05/2023 00:40, Konrad Dybcio wrote:
>>> Add basic SM6375 support to the DPU1 driver to enable display output.
>>>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>>> ---
>>> .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h | 152 +++++++++++++++++++++
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>>> 4 files changed, 155 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h
>>> new file mode 100644
>>> index 000000000000..c7f303b0557e
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h
>>> @@ -0,0 +1,152 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
>>> + * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023, Linaro Limited
>>> + */
>>> +
>>> +#ifndef _DPU_6_9_SM6375_H
>>> +#define _DPU_6_9_SM6375_H
>>> +
>>> +static const struct dpu_caps sm6375_dpu_caps = {
>>> + .max_mixer_width = DEFAULT_DPU_LINE_WIDTH,
>>> + .max_mixer_blendstages = 0x4,
>>> + .qseed_type = DPU_SSPP_SCALER_QSEED4,
>>> + .has_dim_layer = true,
>>> + .has_idle_pc = true,
>>> + .max_linewidth = 2160,
>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>> +};
>>> +
>>> +static const struct dpu_ubwc_cfg sm6375_ubwc_cfg = {
>>> + .ubwc_version = DPU_HW_UBWC_VER_20,
>>> + .ubwc_swizzle = 6,
>>> + .highest_bank_bit = 1,
>>> +};
>>> +
>>> +static const struct dpu_mdp_cfg sm6375_mdp[] = {
>>> + {
>>> + .name = "top_0", .id = MDP_TOP,
>>> + .base = 0x0, .len = 0x494,
>>> + .features = 0,
>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
>>> + },
>>> +};
>>> +
>>> +static const struct dpu_ctl_cfg sm6375_ctl[] = {
>>> + {
>>> + .name = "ctl_0", .id = CTL_0,
>>> + .base = 0x1000, .len = 0x1dc,
>>> + .features = BIT(DPU_CTL_ACTIVE_CFG),
>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
>>> + },
>>> +};
>>> +
>>> +static const struct dpu_sspp_cfg sm6375_sspp[] = {
>>> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
>>> + sm6115_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
>>> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
>>> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>>> +};
>>> +
>>> +static const struct dpu_lm_cfg sm6375_lm[] = {
>>> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_QCM2290_MASK,
>>> + &qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0),
>>> +};
>>> +
>>> +static const struct dpu_dspp_cfg sm6375_dspp[] = {
>>> + DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
>>> + &sm8150_dspp_sblk),
>>> +};
>>> +
>>> +static const struct dpu_pingpong_cfg sm6375_pp[] = {
>>> + PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
>>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
>>> + -1),
>>> +};
>>> +
>>> +static const struct dpu_intf_cfg sm6375_intf[] = {
>>> + INTF_BLK("intf_0", INTF_0, 0x00000, 0x2c0, INTF_NONE, 0, 0, 0, 0, 0),
>>> + INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 24, INTF_SC7280_MASK,
>>
>> If I understand correctly, all 5.x and 6.x DPU also have HCTL/DATA_ACTIVE/etc. registers. (I do not know about the sdm845, if it has that reg or not). So a proper fix would be to add DPU_DATA_HCTL_EN to sc7180 mask rather than upgrading sm6375 to use sc7280 mask.
> They're touched unconditionally on msm-4.14 (8150 /and 7180 I think/ release)
Yes. Verified, they are present since DPU 5.x Could you please adjust
masks accordingly?
>
> Konrad
>>
>>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
>>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
>>> + DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
>>> +};
>>> +
>>> +static const struct dpu_vbif_cfg sm6375_vbif[] = {
>>> + {
>>> + .name = "vbif_0", .id = VBIF_RT,
>>> + .base = 0, .len = 0x2008,
>>> + .features = BIT(DPU_VBIF_QOS_REMAP),
>>> + .xin_halt_timeout = 0x4000,
>>> + .qos_rp_remap_size = 0x40,
>>> + .qos_rt_tbl = {
>>> + .npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
>>> + .priority_lvl = sdm845_rt_pri_lvl,
>>> + },
>>> + .qos_nrt_tbl = {
>>> + .npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
>>> + .priority_lvl = sdm845_nrt_pri_lvl,
>>> + },
>>> + .memtype_count = 14,
>>> + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
>>> + },
>>> +};
>>> +
>>> +static const struct dpu_perf_cfg sm6375_perf_data = {
>>> + .max_bw_low = 5200000,
>>> + .max_bw_high = 6200000,
>>> + .min_core_ib = 2500000,
>>> + .min_llcc_ib = 0, /* No LLCC on this SoC */
>>> + .min_dram_ib = 1600000,
>>> + .min_prefill_lines = 24,
>>> + /* TODO: confirm danger_lut_tbl */
>>> + .danger_lut_tbl = {0xffff, 0xffff, 0x0, 0x0, 0xffff},
>>> + .qos_lut_tbl = {
>>> + {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
>>> + .entries = sm6350_qos_linear_macrotile
>>> + },
>>> + {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
>>> + .entries = sm6350_qos_linear_macrotile
>>> + },
>>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
>>> + .entries = sc7180_qos_nrt
>>> + },
>>> + },
>>> + .cdp_cfg = {
>>> + {.rd_enable = 1, .wr_enable = 1},
>>> + {.rd_enable = 1, .wr_enable = 0}
>>> + },
>>> + .clk_inefficiency_factor = 105,
>>> + .bw_inefficiency_factor = 120,
>>> +};
>>> +
>>> +const struct dpu_mdss_cfg dpu_sm6375_cfg = {
>>> + .caps = &sm6375_dpu_caps,
>>> + .ubwc = &sm6375_ubwc_cfg,
>>> + .mdp_count = ARRAY_SIZE(sm6375_mdp),
>>> + .mdp = sm6375_mdp,
>>> + .ctl_count = ARRAY_SIZE(sm6375_ctl),
>>> + .ctl = sm6375_ctl,
>>> + .sspp_count = ARRAY_SIZE(sm6375_sspp),
>>> + .sspp = sm6375_sspp,
>>> + .mixer_count = ARRAY_SIZE(sm6375_lm),
>>> + .mixer = sm6375_lm,
>>> + .dspp_count = ARRAY_SIZE(sm6375_dspp),
>>> + .dspp = sm6375_dspp,
>>> + .pingpong_count = ARRAY_SIZE(sm6375_pp),
>>> + .pingpong = sm6375_pp,
>>> + .intf_count = ARRAY_SIZE(sm6375_intf),
>>> + .intf = sm6375_intf,
>>> + .vbif_count = ARRAY_SIZE(sm6375_vbif),
>>> + .vbif = sm6375_vbif,
>>> + .perf = &sm6375_perf_data,
>>> + .mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
>>> + BIT(MDP_SSPP_TOP0_INTR2) | \
>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
>>> + BIT(MDP_INTF1_INTR) | \
>>> + BIT(MDP_INTF1_TEAR_INTR),
>>> +};
>>> +
>>> +#endif
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> index 5ef1dffc27dc..7577572a5ef4 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> @@ -809,6 +809,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
>>> #include "catalog/dpu_6_3_sm6115.h"
>>> #include "catalog/dpu_6_4_sm6350.h"
>>> #include "catalog/dpu_6_5_qcm2290.h"
>>> +#include "catalog/dpu_6_9_sm6375.h"
>>> #include "catalog/dpu_7_0_sm8350.h"
>>> #include "catalog/dpu_7_2_sc7280.h"
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> index 56af77353b1e..96a8ec02b5b8 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -884,6 +884,7 @@ extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
>>> extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
>>> extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
>>> extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
>>> +extern const struct dpu_mdss_cfg dpu_sm6375_cfg;
>>> extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
>>> extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
>>> extern const struct dpu_mdss_cfg dpu_sc8280xp_cfg;
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> index 46be7ad8d615..980c3c8f8269 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> @@ -1287,6 +1287,7 @@ static const struct of_device_id dpu_dt_match[] = {
>>> { .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
>>> { .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
>>> { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
>>> + { .compatible = "qcom,sm6375-dpu", .data = &dpu_sm6375_cfg, },
>>> { .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
>>> { .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
>>> { .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
>>>
>>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list