[Freedreno] [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
Marijn Suijten
marijn.suijten at somainline.org
Mon May 15 21:21:23 UTC 2023
On 2023-05-12 11:00:22, Kuogee Hsieh wrote:
>
> From: Abhinav Kumar <quic_abhinavk at quicinc.com>
>
> Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and
> feature flag information. Each display compression engine (DCE) contains
> dual hard slice DSC encoders so both share same base address but with
> its own different sub block address.
Can we have an explanation of hard vs soft slices in some commit message
and/or code documentation?
>
> changes in v4:
> -- delete DPU_DSC_HW_REV_1_1
> -- re arrange sc8280xp_dsc[]
>
> changes in v4:
> -- fix checkpatch warning
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h | 14 ++++++++++++
> .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 7 ++++++
> .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h | 16 ++++++++++++++
> .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 14 ++++++++++++
> .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 14 ++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 25 +++++++++++++++++++++-
> 6 files changed, 89 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> index 500cfd0..c4c93c8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> @@ -153,6 +153,18 @@ static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> };
>
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg sm8350_dsc[] = {
> + DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
Downstream says that the size is 0x10 (and 0x100 for the enc sblk, 0x10
for the ctl sblk). This simply fills it up to the start of the enc sblk
so that we can see all registers in the dump? After all only
DSC_CMN_MAIN_CNF is defined in the main register space, so 0x10 is
adequate.
> + DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
Should we add an extra suffix to the name to indicate which hard-slice
DSC encoder it is? i.e. "dce_0_0" and "dce_0_1" etc?
> + DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
> + DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
See comment below about loose BIT() in features.
> +};
> +
> static const struct dpu_intf_cfg sm8350_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> @@ -215,6 +227,8 @@ const struct dpu_mdss_cfg dpu_sm8350_cfg = {
> .dspp = sm8350_dspp,
> .pingpong_count = ARRAY_SIZE(sm8350_pp),
> .pingpong = sm8350_pp,
> + .dsc = sm8350_dsc,
> + .dsc_count = ARRAY_SIZE(sm8350_dsc),
Count goes first **everywhere else**, let's not break consistency here.
> .merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
> .merge_3d = sm8350_merge_3d,
> .intf_count = ARRAY_SIZE(sm8350_intf),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> index 5646713..42c66fe 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> @@ -93,6 +93,11 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
> PP_BLK_DITHER("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> };
>
> +/* NOTE: sc7280 only has one dsc hard slice encoder */
DSC
> +static const struct dpu_dsc_cfg sc7280_dsc[] = {
> + DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
> +};
> +
> static const struct dpu_intf_cfg sc7280_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> @@ -149,6 +154,8 @@ const struct dpu_mdss_cfg dpu_sc7280_cfg = {
> .mixer = sc7280_lm,
> .pingpong_count = ARRAY_SIZE(sc7280_pp),
> .pingpong = sc7280_pp,
> + .dsc_count = ARRAY_SIZE(sc7280_dsc),
> + .dsc = sc7280_dsc,
> .intf_count = ARRAY_SIZE(sc7280_intf),
> .intf = sc7280_intf,
> .vbif_count = ARRAY_SIZE(sdm845_vbif),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> index 808aacd..1901fff 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> @@ -141,6 +141,20 @@ static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> };
>
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg sc8280xp_dsc[] = {
> + DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
> + DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
> + DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
> + DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
> + DSC_BLK_1_2("dce_2", DSC_4, 0x82000, 0x100, 0, dsc_sblk_0),
> + DSC_BLK_1_2("dce_2", DSC_5, 0x82000, 0x100, 0, dsc_sblk_1),
> +};
> +
> /* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
> static const struct dpu_intf_cfg sc8280xp_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
> @@ -216,6 +230,8 @@ const struct dpu_mdss_cfg dpu_sc8280xp_cfg = {
> .dspp = sc8280xp_dspp,
> .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
> .pingpong = sc8280xp_pp,
> + .dsc = sc8280xp_dsc,
> + .dsc_count = ARRAY_SIZE(sc8280xp_dsc),
Swap the two lines.
> .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
> .merge_3d = sc8280xp_merge_3d,
> .intf_count = ARRAY_SIZE(sc8280xp_intf),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> index 1a89ff9..741d03f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> @@ -161,6 +161,18 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
> };
>
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg sm8450_dsc[] = {
> + DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
> + DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
> + DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
> + DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
> +};
> +
> static const struct dpu_intf_cfg sm8450_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> @@ -223,6 +235,8 @@ const struct dpu_mdss_cfg dpu_sm8450_cfg = {
> .dspp = sm8450_dspp,
> .pingpong_count = ARRAY_SIZE(sm8450_pp),
> .pingpong = sm8450_pp,
> + .dsc = sm8450_dsc,
> + .dsc_count = ARRAY_SIZE(sm8450_dsc),
Another swap.
> .merge_3d_count = ARRAY_SIZE(sm8450_merge_3d),
> .merge_3d = sm8450_merge_3d,
> .intf_count = ARRAY_SIZE(sm8450_intf),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> index 497b34c..3ee6dc8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> @@ -165,6 +165,18 @@ static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
> };
>
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg sm8550_dsc[] = {
> + DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
> + DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
> + DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
> + DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
> +};
> +
> static const struct dpu_intf_cfg sm8550_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> @@ -227,6 +239,8 @@ const struct dpu_mdss_cfg dpu_sm8550_cfg = {
> .dspp = sm8550_dspp,
> .pingpong_count = ARRAY_SIZE(sm8550_pp),
> .pingpong = sm8550_pp,
> + .dsc = sm8550_dsc,
> + .dsc_count = ARRAY_SIZE(sm8550_dsc),
Swap.
> .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
> .merge_3d = sm8550_merge_3d,
> .intf_count = ARRAY_SIZE(sm8550_intf),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 78e4bf6..c1d7338 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__
> @@ -522,6 +522,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
> /*************************************************************
> * DSC sub blocks config
> *************************************************************/
> +static const struct dpu_dsc_sub_blks dsc_sblk_0 = {
> + .enc = {.base = 0x100, .len = 0x100},
> + .ctl = {.base = 0xF00, .len = 0x10},
> +};
> +
> +static const struct dpu_dsc_sub_blks dsc_sblk_1 = {
> + .enc = {.base = 0x200, .len = 0x100},
> + .ctl = {.base = 0xF80, .len = 0x10},
> +};
> +
> #define DSC_BLK(_name, _id, _base, _features) \
> {\
> .name = _name, .id = _id, \
> @@ -529,6 +539,19 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
> .features = _features, \
> }
>
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +#define DSC_BLK_1_2(_name, _id, _base, _len, _features, _sblk) \
There are no address values here so this comment doesn't seem very
useful, and it is already duplicated on every DSC block array, where the
duplication is more visible. Drop the comment here?
> + {\
> + .name = _name, .id = _id, \
> + .base = _base, .len = _len, \
The len is always 0x100 (downstream says 0x10), should we hardcode it
here and drop _len? We can always add it back if a future revision
starts changing it, but that's not the case currently.
> + .features = BIT(DPU_DSC_HW_REV_1_2) | _features, \
We don't willy-nilly append bits like that: should there be global
feature flags?
Or is this the start of a new era where we expand those defines in-line
and drop them altogether? I'd much prefer that but we should first
align on this direction (and then also make the switch globally in a
followup).
- Marijn
> + .sblk = &_sblk, \
> + }
> +
> /*************************************************************
> * INTF sub blocks config
> *************************************************************/
> --
> 2.7.4
>
More information about the Freedreno
mailing list