[Freedreno] [PATCH v2 07/13] drm/msm/dpu: Add SM6350 support

[Dmitry Baryshkov]

On 21/04/2023 02:05, Konrad Dybcio wrote:
> 
> 
> On 21.04.2023 00:41, Dmitry Baryshkov wrote:
>> On 21/04/2023 01:31, Konrad Dybcio wrote:
>>> Add SM6350 support to the DPU1 driver to enable display output.
>>>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at somainline.org>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>>> ---
> [...]
> 
>>> +
>>> +static const struct dpu_sspp_cfg sm6350_sspp[] = {
>>> +    SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
>>> +         sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
>>> +    SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
>>> +         sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>>> +    SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1f8, DMA_CURSOR_SDM845_MASK,
>>> +         sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
>>
>> DPU_CLK_CTRL_DMA0
>>
>>> +    SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1f8, DMA_CURSOR_SDM845_MASK,
>>> +         sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>>
>> DPU_CLK_CTRL_DMA2
> _DMA1?
> 
> 
>>
>>
>>> +};
>>> +
> 
>>> +static const struct dpu_qos_lut_entry sm6350_qos_linear_macrotile[] = {
>>> +    {.fl = 0, .lut = 0x0011223344556677 },
>>> +    {.fl = 0, .lut = 0x0011223445566777 },
>>
>> Do we need two equal entries here?
> Hmm.. looks like the SDE driver dropped the fill level
> logic in 4.19 times and that might have thrown me off
> when porting this Since the [0] entry has what looks
> like a lower LUT value, should I give it .fl=1?
> 
> 
>>
>> Also please push the qos to the dpu_hw_catalog.c, I want to take another look at these structures and it is easier if all of them are beneath one's eyes.
> Will do.
> 
>>
>>> +};
>>> +
>>> +static const struct dpu_perf_cfg sm6350_perf_data = {
>>> +    .max_bw_low = 4200000,
>>> +    .max_bw_high = 5100000,
>>> +    .min_core_ib = 2500000,
>>> +    .min_llcc_ib = 0,
>>> +    .min_dram_ib = 1600000,
>>> +    .min_prefill_lines = 35,
>>> +    /* TODO: confirm danger_lut_tbl */
>>> +    .danger_lut_tbl = {0xffff, 0xffff, 0x0, 0x0, 0xffff},
> [...]
> 
> 
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -320,6 +320,8 @@ enum dpu_qos_lut_usage {
>>>        DPU_QOS_LUT_USAGE_LINEAR,
>>>        DPU_QOS_LUT_USAGE_MACROTILE,
>>>        DPU_QOS_LUT_USAGE_NRT,
>>> +    DPU_QOS_LUT_USAGE_CWB,
>>> +    DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
>>
>> This should probably be removed. It would be nice to clean these things up, but not as a part of sm6350.
> Well, I won't be able to fill in the danger LUT table otherwise!

danger/safe LUT tables have two entries for portrait/landscape (which we 
do not support). Please choose either of them for now.

These two entries should be dropped for now (it was known for some time 
that MACROTILE_QSEED != MACROTILE. And CWB is not supported yet).

> 
> Konrad
>>
>>>        DPU_QOS_LUT_USAGE_MAX,
>>>    };
>>>    @@ -880,6 +882,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
>>> +extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
>>>    extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> index 0e7a68714e9e..46be7ad8d615 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>>> @@ -1286,6 +1286,7 @@ static const struct of_device_id dpu_dt_match[] = {
>>>        { .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
>>>        { .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
>>>        { .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
>>> +    { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
>>>        { .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
>>>        { .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
>>>        { .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
>>>
>>

-- 
With best wishes
Dmitry