[Freedreno] [PATCH 06/15] phy: qcom-uniphy: add more registers from display PHYs

[Dmitry Baryshkov]

Import register definitions from 28nm DSI and HDMI PHYs, adding more UNI
PHY registers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-uniphy.h | 33 ++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy.h b/drivers/phy/qualcomm/phy-qcom-uniphy.h
index d8be32b5317c..4be9bda37fa3 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy.h
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy.h
@@ -8,8 +8,19 @@
 
 /* PHY registers */
 #define UNIPHY_PLL_REFCLK_CFG		0x000
+#define UNIPHY_PLL_POSTDIV1_CFG		0x004
+#define UNIPHY_PLL_CHGPUMP_CFG		0x008
+#define UNIPHY_PLL_VCOLPF_CFG		0x00c
+#define UNIPHY_PLL_VREG_CFG		0x010
 #define UNIPHY_PLL_PWRGEN_CFG		0x014
+#define UNIPHY_PLL_DMUX_CFG		0x018
+#define UNIPHY_PLL_AMUX_CFG		0x01c
 #define UNIPHY_PLL_GLB_CFG		0x020
+#define UNIPHY_PLL_POSTDIV2_CFG		0x024
+#define UNIPHY_PLL_POSTDIV3_CFG		0x028
+#define UNIPHY_PLL_LPFR_CFG		0x02c
+#define UNIPHY_PLL_LPFC1_CFG		0x030
+#define UNIPHY_PLL_LPFC2_CFG		0x034
 #define UNIPHY_PLL_SDM_CFG0		0x038
 #define UNIPHY_PLL_SDM_CFG1		0x03c
 #define UNIPHY_PLL_SDM_CFG2		0x040
@@ -22,11 +33,33 @@
 #define UNIPHY_PLL_LKDET_CFG0		0x05c
 #define UNIPHY_PLL_LKDET_CFG1		0x060
 #define UNIPHY_PLL_LKDET_CFG2		0x064
+#define UNIPHY_PLL_TEST_CFG		0x068
 #define UNIPHY_PLL_CAL_CFG0		0x06c
+#define UNIPHY_PLL_CAL_CFG1		0x070
+#define UNIPHY_PLL_CAL_CFG2		0x074
+#define UNIPHY_PLL_CAL_CFG3		0x078
+#define UNIPHY_PLL_CAL_CFG4		0x07c
+#define UNIPHY_PLL_CAL_CFG5		0x080
+#define UNIPHY_PLL_CAL_CFG6		0x084
+#define UNIPHY_PLL_CAL_CFG7		0x088
 #define UNIPHY_PLL_CAL_CFG8		0x08c
 #define UNIPHY_PLL_CAL_CFG9		0x090
 #define UNIPHY_PLL_CAL_CFG10		0x094
 #define UNIPHY_PLL_CAL_CFG11		0x098
+#define UNIPHY_PLL_EFUSE_CFG		0x09c
+#define UNIPHY_PLL_DEBUG_BUS_SEL	0x0a0
+#define UNIPHY_PLL_CTRL_42		0x0a4
+#define UNIPHY_PLL_CTRL_43		0x0a8
+#define UNIPHY_PLL_CTRL_44		0x0ac
+#define UNIPHY_PLL_CTRL_45		0x0b0
+#define UNIPHY_PLL_CTRL_46		0x0b4
+#define UNIPHY_PLL_CTRL_47		0x0b8
+#define UNIPHY_PLL_CTRL_48		0x0bc
 #define UNIPHY_PLL_STATUS		0x0c0
+#define UNIPHY_PLL_DEBUG_BUS0		0x0c4
+#define UNIPHY_PLL_DEBUG_BUS1		0x0c8
+#define UNIPHY_PLL_DEBUG_BUS2		0x0cc
+#define UNIPHY_PLL_DEBUG_BUS3		0x0d0
+#define UNIPHY_PLL_CTRL_54		0x0d4
 
 #endif
-- 
2.39.2