[Freedreno] [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
Kuogee Hsieh
quic_khsieh at quicinc.com
Mon Oct 2 22:24:23 UTC 2023
On 9/27/2023 2:41 PM, Dmitry Baryshkov wrote:
> On Wed, 27 Sept 2023 at 23:54, Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>> Currently DP driver is executed independent of PM runtime framework.
>> This lead to msm edp panel can not be detected by edp_panel driver at
>> generic_edp_panel_probe() due to aux dpcd read failed at msm edp driver.
> eDP, AUX, DPCD. leads. not being detected, s/at/during.
>
> Also there is no msm eDP driver.
>
>> Incorporating pm runtime framework into DP driver so that both power and
> Incorporate. PM
>
>> clocks to enable/disable host controller fits with PM runtime mechanism.
> Ugh?
>
>> Once pm runtime framework is incorporated into DP driver, wake up device
> waking
>
>> from power up path is not necessary. Hence remove it.
>> Since DP is part of user interface, we choice to use autosuspend feature
>> with timer of one second. pm runtime suspends is prevented from happening
>> until timer expired.
> No, this is not the right reason to use autosuspend. Please use normal
> suspend unless there is a performance regression caused by the
> suspend/resume paths.
>
>> Changes in v4:
>> -- reworded commit text to explain why pm_framework is required for edp panel
>> -- reworded commit text to explain autosuspend is choiced
>> -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3
>> -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3
>> -- return value from pm_runtime_resume_and_get() directly
>> -- check return value of devm_pm_runtime_enable()
>> -- delete pm_runtime_xxx from dp_display_remove()
>> -- drop dp_display_host_init() from EV_HPD_INIT_SETUP
>>
>> Changes in v3:
>> -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
>> -- use pm_runtime_resume_and_get() instead of pm_runtime_get()
>> -- error checking pm_runtime_resume_and_get() return value
>> -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>> Reported-by: kernel test robot <lkp at intel.com>
>> ---
>> drivers/gpu/drm/msm/dp/dp_aux.c | 6 +++
>> drivers/gpu/drm/msm/dp/dp_display.c | 95 +++++++++++++++++++++++++++----------
>> drivers/gpu/drm/msm/dp/dp_power.c | 16 -------
>> drivers/gpu/drm/msm/dp/dp_power.h | 11 -----
>> 4 files changed, 77 insertions(+), 51 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
>> index 8e3b677..22eb774 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>> return -EINVAL;
>> }
>>
>> + ret = pm_runtime_resume_and_get(dp_aux->dev);
>> + if (ret)
>> + return ret;
>> +
>> mutex_lock(&aux->mutex);
>> if (!aux->initted) {
>> ret = -EIO;
>> @@ -364,6 +368,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>>
>> exit:
>> mutex_unlock(&aux->mutex);
>> + pm_runtime_mark_last_busy(dp_aux->dev);
>> + pm_runtime_put_autosuspend(dp_aux->dev);
>>
>> return ret;
>> }
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
>> index 3ef141c..bfb4692 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -276,8 +276,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
>> dp->dp_display.drm_dev = drm;
>> priv->dp[dp->id] = &dp->dp_display;
>>
>> -
>> -
> Is this also a part of pm_runtime support? No, it is not.
>
>> dp->drm_dev = drm;
>> dp->aux->drm_dev = drm;
>> rc = dp_aux_register(dp->aux);
>> @@ -286,7 +284,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
>> goto end;
>> }
>>
>> -
> And this. If you want to clean up stray empty lines, please split that
> to a separate patch.
>
>> rc = dp_register_audio_driver(dev, dp->audio);
>> if (rc) {
>> DRM_ERROR("Audio registration Dp failed\n");
>> @@ -310,15 +307,10 @@ static void dp_display_unbind(struct device *dev, struct device *master,
>> struct dp_display_private *dp = dev_get_dp_display_private(dev);
>> struct msm_drm_private *priv = dev_get_drvdata(master);
>>
>> - /* disable all HPD interrupts */
>> - if (dp->core_initialized)
>> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
>> -
>> kthread_stop(dp->ev_tsk);
>>
>> of_dp_aux_depopulate_bus(dp->aux);
>>
>> - dp_power_client_deinit(dp->power);
>> dp_unregister_audio_driver(dev, dp->audio);
>> dp_aux_unregister(dp->aux);
>> dp->drm_dev = NULL;
>> @@ -460,6 +452,16 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
>> static int dp_display_usbpd_configure_cb(struct device *dev)
>> {
>> struct dp_display_private *dp = dev_get_dp_display_private(dev);
>> + int ret;
>> +
>> + if (!dp->dp_display.internal_hpd) {
> I'd say, drop the condition here.
ok,
to match p,_runtime_get and pm_runtime_put, I will move
pm_runtime_resume_and_get(&dp->pdev->dev) from here to
dp_hpd_plug_handle() and
add pm_runtime_put() at dp_hpd_unpluh_handle().
>
>> + /* hpd through gpio */
> Why? !internal_hpd means any possible way of delivering an HPD event.
> For example, via the USB-C TCPM.
>
>> + ret = pm_runtime_resume_and_get(&dp->pdev->dev);
> Which function contains corresponding pm_runtime_put()?
should be at dp_hpd_unplug_handle().
I had missed that, will add it at next patch.
>
>> + if (ret) {
>> + DRM_ERROR("failed to start power\n");
> failed to resume
>
>> + return ret;
>> + }
>> + }
>>
>> dp_display_host_phy_init(dp);
>>
>> @@ -1086,7 +1088,6 @@ static int hpd_event_thread(void *data)
>>
>> switch (todo->event_id) {
>> case EV_HPD_INIT_SETUP:
>> - dp_display_host_init(dp_priv);
>> break;
>> case EV_HPD_PLUG_INT:
>> dp_hpd_plug_handle(dp_priv, todo->data);
>> @@ -1263,6 +1264,13 @@ static int dp_display_probe(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, &dp->dp_display);
>>
>> + rc = devm_pm_runtime_enable(&pdev->dev);
>> + if (rc)
>> + return rc;
> Missing submodules deinit.
>
>> +
>> + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
>> + pm_runtime_use_autosuspend(&pdev->dev);
>> +
>> rc = dp_display_request_irq(dp);
>> if (rc)
>> return rc;
>> @@ -1285,6 +1293,34 @@ static int dp_display_remove(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, NULL);
>>
>> + dp_display_deinit_sub_modules(dp);
> There is already a call to dp_display_deinit_sub_modules() in
> dp_display_remove().
>> +
>> + return 0;
>> +}
>> +
>> +static int dp_pm_runtime_suspend(struct device *dev)
>> +{
>> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
>> +
>> + if (dp->dp_display.is_edp) {
>> + dp_display_host_phy_exit(dp);
>> + dp_catalog_ctrl_hpd_disable(dp->catalog);
>> + }
> I don't see where this code was removed.
>
>> + dp_display_host_deinit(dp);
>> +
>> + return 0;
>> +}
>> +
>> +static int dp_pm_runtime_resume(struct device *dev)
>> +{
>> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
>> +
>> + dp_display_host_init(dp);
>> + if (dp->dp_display.is_edp) {
>> + dp_catalog_ctrl_hpd_enable(dp->catalog);
>> + dp_display_host_phy_init(dp);
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -1389,6 +1425,7 @@ static int dp_pm_suspend(struct device *dev)
>> }
>>
>> static const struct dev_pm_ops dp_pm_ops = {
>> + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
>> .suspend = dp_pm_suspend,
>> .resume = dp_pm_resume,
>> };
>> @@ -1473,10 +1510,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
>> aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>>
>> if (aux_bus && dp->is_edp) {
>> - dp_display_host_init(dp_priv);
>> - dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
>> - dp_display_host_phy_init(dp_priv);
>> -
>> /*
>> * The code below assumes that the panel will finish probing
>> * by the time devm_of_dp_aux_populate_ep_devices() returns.
>> @@ -1578,6 +1611,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
>> dp_hpd_plug_handle(dp_display, 0);
>>
>> mutex_lock(&dp_display->event_mutex);
>> + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
>> + DRM_ERROR("failed to start power\n");
> failed to resume.
>
>> + mutex_unlock(&dp_display->event_mutex);
>> + return;
>> + }
>>
>> state = dp_display->hpd_state;
>> if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
>> @@ -1642,10 +1680,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
>> mutex_lock(&dp_display->event_mutex);
>>
>> state = dp_display->hpd_state;
>> - if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) {
>> - mutex_unlock(&dp_display->event_mutex);
>> - return;
>> - }
>> + if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED)
>> + drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n",
>> + dp->connector_type, state);
>>
>> dp_display_disable(dp_display);
>>
>> @@ -1658,6 +1695,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
>> }
>>
>> drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
>> +
>> + pm_runtime_mark_last_busy(&dp_display->pdev->dev);
>> + pm_runtime_put_autosuspend(&dp_display->pdev->dev);
>> mutex_unlock(&dp_display->event_mutex);
>> }
>>
>> @@ -1697,6 +1737,12 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
>> struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
>>
>> mutex_lock(&dp->event_mutex);
>> + if (pm_runtime_resume_and_get(&dp->pdev->dev)) {
>> + DRM_ERROR("failed to start power\n");
>> + mutex_unlock(&dp->event_mutex);
>> + return;
>> + }
>> +
>> dp_catalog_ctrl_hpd_enable(dp->catalog);
>>
>> /* enable HDP interrupts */
>> @@ -1718,6 +1764,9 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
>> dp_catalog_ctrl_hpd_disable(dp->catalog);
>>
>> dp_display->internal_hpd = false;
>> +
>> + pm_runtime_mark_last_busy(&dp->pdev->dev);
>> + pm_runtime_put_autosuspend(&dp->pdev->dev);
>> mutex_unlock(&dp->event_mutex);
>> }
>>
>> @@ -1732,13 +1781,11 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
>> if (dp_display->internal_hpd)
>> return;
>>
>> - if (!dp->core_initialized) {
>> - drm_dbg_dp(dp->drm_dev, "not initialized\n");
>> - return;
>> - }
>> -
>> - if (!dp_display->link_ready && status == connector_status_connected)
>> + /* hpd through gpio */
> Lack of the comment might be better than the incorrect comment.
>
>> + if (!dp_display->link_ready && status == connector_status_connected) {
>> + dp->hpd_state = ST_DISCONNECTED;
> Is this also a part of pm_runtime support?
>
>> dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
>> - else if (dp_display->link_ready && status == connector_status_disconnected)
>> + } else if (dp_display->link_ready && status == connector_status_disconnected) {
>> dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
>> + }
>> }
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
>> index 5cb84ca..863c766 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_power.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
>> @@ -152,20 +152,9 @@ int dp_power_client_init(struct dp_power *dp_power)
>>
>> power = container_of(dp_power, struct dp_power_private, dp_power);
>>
>> - pm_runtime_enable(power->dev);
>> -
>> return dp_power_clk_init(power);
>> }
>>
>> -void dp_power_client_deinit(struct dp_power *dp_power)
>> -{
>> - struct dp_power_private *power;
>> -
>> - power = container_of(dp_power, struct dp_power_private, dp_power);
>> -
>> - pm_runtime_disable(power->dev);
>> -}
>> -
>> int dp_power_init(struct dp_power *dp_power)
>> {
>> int rc = 0;
>> @@ -173,11 +162,7 @@ int dp_power_init(struct dp_power *dp_power)
>>
>> power = container_of(dp_power, struct dp_power_private, dp_power);
>>
>> - pm_runtime_get_sync(power->dev);
>> -
>> rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
>> - if (rc)
>> - pm_runtime_put_sync(power->dev);
>>
>> return rc;
>> }
>> @@ -189,7 +174,6 @@ int dp_power_deinit(struct dp_power *dp_power)
>> power = container_of(dp_power, struct dp_power_private, dp_power);
>>
>> dp_power_clk_enable(dp_power, DP_CORE_PM, false);
>> - pm_runtime_put_sync(power->dev);
>> return 0;
>> }
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
>> index a3dec20..55ada51 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_power.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
>> @@ -81,17 +81,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
>> int dp_power_client_init(struct dp_power *power);
>>
>> /**
>> - * dp_power_clinet_deinit() - de-initialize clock and regulator modules
>> - *
>> - * @power: instance of power module
>> - * return: 0 for success, error for failure.
>> - *
>> - * This API will de-initialize the DisplayPort's clocks and regulator
>> - * modules.
>> - */
>> -void dp_power_client_deinit(struct dp_power *power);
>> -
>> -/**
>> * dp_power_get() - configure and get the DisplayPort power module data
>> *
>> * @parser: instance of parser module
>> --
>> 2.7.4
>>
>
More information about the Freedreno
mailing list