[Freedreno] [PATCH v6 5/7] drm/msm/dp: incorporate pm_runtime framework into DP driver
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Oct 6 21:49:27 UTC 2023
On 07/10/2023 00:38, Kuogee Hsieh wrote:
> Currently DP driver is executed independent of PM runtime framework.
> This leads msm eDP panel can not being detected by edp_panel driver during
> generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver.
> Incorporate PM runtime framework into DP driver so that host controller's
> power and clocks are enable/disable through PM runtime mechanism.
> Once PM runtime framework is incorporated into DP driver, waking up device
> from power up path is not necessary. Hence remove it.
>
> After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend()
> to handle power off both DP phy and controller during suspend and
> dp_pm_resume() to handle power on both DP phy and controller during resume
> are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are
> dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume()
> respectively.
>
> Please noted that there are different implementations between external DP
> and eDP. For external DP, DP controller and HPD block are initialized with
> HPD irq enabled after dp_pm_runtime_resume() and then start waiting for HPD
> plugin interrupt. Once HDP plugin interrupt received, dp_hpd_plugin_handle()
> will initialize PHY immediately followed by link training.
> For eDP, eDP controller, HPD block and PHY are initialized with HPD irq
> disabled after dp_pm_runtime_resume() since HPD interrupt is not required.
Ugh. Your original comment in the email was easier to parse. Can we just
have it instead? And I thought that it would be a better fit for the
source code comment rather than for the commit message.
>
> Changes in v6:
> -- delete dp_power_client_deinit(dp->power);
> -- remove if (!dp->dp_display.is_edp) condition checkout at dp_hpd_plug_handle()
> -- remove if (!dp->dp_display.is_edp) condition checkout at dp_hpd_unplug_handle()
> -- add IRQF_NO_AUTOEN to devm_request_irq()
> -- add enable_irq() and disable_irq() to pm_runtime_resume() and pm_runtime_suspend()
> -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable()
>
> Changes in v5:
> -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() directly
> -- squash add pm_runtime_force_suspend()/resume() patch into this patch
>
> Changes in v4:
> -- reworded commit text to explain why pm_framework is required for edp panel
> -- reworded commit text to explain autosuspend is choiced
> -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3
> -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3
> -- return value from pm_runtime_resume_and_get() directly
> -- check return value of devm_pm_runtime_enable()
> -- delete pm_runtime_xxx from dp_display_remove()
> -- drop dp_display_host_init() from EV_HPD_INIT_SETUP
> -- drop both dp_pm_prepare() and dp_pm_compete() from this change
> -- delete ST_SUSPENDED state
> -- rewording commit text to add more details regrading the purpose
> of this change
>
> Changes in v3:
> -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
> -- use pm_runtime_resume_and_get() instead of pm_runtime_get()
> -- error checking pm_runtime_resume_and_get() return value
> -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
> -- replace dp_pm_suspend() with pm_runtime_force_suspend()
> -- replace dp_pm_resume() with pm_runtime_force_resume()
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Reported-by: kernel test robot <lkp at intel.com>
> ---
> drivers/gpu/drm/msm/dp/dp_aux.c | 5 ++
> drivers/gpu/drm/msm/dp/dp_display.c | 167 ++++++++++++------------------------
> drivers/gpu/drm/msm/dp/dp_power.c | 16 ----
> drivers/gpu/drm/msm/dp/dp_power.h | 11 ---
> 4 files changed, 60 insertions(+), 139 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 8e3b677..10b6eeb 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
> return -EINVAL;
> }
>
> + ret = pm_runtime_resume_and_get(dp_aux->dev);
> + if (ret)
> + return ret;
> +
> mutex_lock(&aux->mutex);
> if (!aux->initted) {
> ret = -EIO;
> @@ -364,6 +368,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>
> exit:
> mutex_unlock(&aux->mutex);
> + pm_runtime_put_sync(dp_aux->dev);
>
> return ret;
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 89fad67..384a86c 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -49,7 +49,6 @@ enum {
> ST_CONNECTED,
> ST_DISCONNECT_PENDING,
> ST_DISPLAY_OFF,
> - ST_SUSPENDED,
> };
>
> enum {
> @@ -310,10 +309,6 @@ static void dp_display_unbind(struct device *dev, struct device *master,
> struct dp_display_private *dp = dev_get_dp_display_private(dev);
> struct msm_drm_private *priv = dev_get_drvdata(master);
>
> - /* disable all HPD interrupts */
> - if (dp->core_initialized)
> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
> -
> kthread_stop(dp->ev_tsk);
>
> of_dp_aux_depopulate_bus(dp->aux);
> @@ -558,7 +553,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n",
> dp->dp_display.connector_type, state);
>
> - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
> + if (state == ST_DISPLAY_OFF) {
> mutex_unlock(&dp->event_mutex);
> return 0;
> }
> @@ -575,6 +570,12 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> return 0;
> }
>
> + ret = pm_runtime_resume_and_get(&dp->pdev->dev);
> + if (ret) {
> + DRM_ERROR("failed to pm_runtime_resume\n");
> + return ret;
> + }
> +
> ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
> if (ret) { /* link train failed */
> dp->hpd_state = ST_DISCONNECTED;
> @@ -657,6 +658,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> dp->dp_display.connector_type, state);
>
> /* uevent will complete disconnection part */
> + pm_runtime_put_sync(&dp->pdev->dev);
> mutex_unlock(&dp->event_mutex);
> return 0;
> }
> @@ -672,7 +674,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
> drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n",
> dp->dp_display.connector_type, state);
>
> - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
> + if (state == ST_DISPLAY_OFF) {
> mutex_unlock(&dp->event_mutex);
> return 0;
> }
> @@ -1085,7 +1087,6 @@ static int hpd_event_thread(void *data)
>
> switch (todo->event_id) {
> case EV_HPD_INIT_SETUP:
> - dp_display_host_init(dp_priv);
> break;
> case EV_HPD_PLUG_INT:
> dp_hpd_plug_handle(dp_priv, todo->data);
> @@ -1177,7 +1178,9 @@ static int dp_display_request_irq(struct dp_display_private *dp)
> }
>
> rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler,
> - IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> + IRQF_TRIGGER_HIGH|IRQF_NO_AUTOEN,
> + "dp_display_isr", dp);
> +
> if (rc < 0) {
> DRM_ERROR("failed to request IRQ%u: %d\n",
> dp->irq, rc);
> @@ -1263,6 +1266,10 @@ static int dp_display_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, &dp->dp_display);
>
> + rc = devm_pm_runtime_enable(&pdev->dev);
> + if (rc)
> + goto err;
> +
> rc = dp_display_request_irq(dp);
> if (rc)
> goto err;
> @@ -1285,7 +1292,6 @@ static int dp_display_remove(struct platform_device *pdev)
> struct dp_display_private *dp = dev_get_dp_display_private(&pdev->dev);
>
> component_del(&pdev->dev, &dp_display_comp_ops);
> - dp_power_client_deinit(dp->power);
> dp_display_deinit_sub_modules(dp);
>
> platform_set_drvdata(pdev, NULL);
> @@ -1293,109 +1299,39 @@ static int dp_display_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static int dp_pm_resume(struct device *dev)
> +static int dp_pm_runtime_suspend(struct device *dev)
> {
> - struct platform_device *pdev = to_platform_device(dev);
> - struct msm_dp *dp_display = platform_get_drvdata(pdev);
> - struct dp_display_private *dp;
> - int sink_count = 0;
> -
> - dp = container_of(dp_display, struct dp_display_private, dp_display);
> -
> - mutex_lock(&dp->event_mutex);
> -
> - drm_dbg_dp(dp->drm_dev,
> - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> - dp->dp_display.connector_type, dp->core_initialized,
> - dp->phy_initialized, dp_display->power_on);
> -
> - /* start from disconnected state */
> - dp->hpd_state = ST_DISCONNECTED;
> -
> - /* turn on dp ctrl/phy */
> - dp_display_host_init(dp);
> -
> - if (dp_display->is_edp)
> - dp_catalog_ctrl_hpd_enable(dp->catalog);
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
>
> - if (dp_catalog_link_is_connected(dp->catalog)) {
> - /*
> - * set sink to normal operation mode -- D0
> - * before dpcd read
> - */
> - dp_display_host_phy_init(dp);
> - dp_link_psm_config(dp->link, &dp->panel->link_info, false);
> - sink_count = drm_dp_read_sink_count(dp->aux);
> - if (sink_count < 0)
> - sink_count = 0;
> + disable_irq(dp->irq);
>
> + if (dp->dp_display.is_edp) {
> dp_display_host_phy_exit(dp);
> + dp_catalog_ctrl_hpd_disable(dp->catalog);
> }
> -
> - dp->link->sink_count = sink_count;
> - /*
> - * can not declared display is connected unless
> - * HDMI cable is plugged in and sink_count of
> - * dongle become 1
> - * also only signal audio when disconnected
> - */
> - if (dp->link->sink_count) {
> - dp->dp_display.link_ready = true;
> - } else {
> - dp->dp_display.link_ready = false;
> - dp_display_handle_plugged_change(dp_display, false);
> - }
> -
> - drm_dbg_dp(dp->drm_dev,
> - "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n",
> - dp->dp_display.connector_type, dp->link->sink_count,
> - dp->dp_display.link_ready, dp->core_initialized,
> - dp->phy_initialized, dp_display->power_on);
> -
> - mutex_unlock(&dp->event_mutex);
> + dp_display_host_deinit(dp);
>
> return 0;
> }
>
> -static int dp_pm_suspend(struct device *dev)
> +static int dp_pm_runtime_resume(struct device *dev)
> {
> - struct platform_device *pdev = to_platform_device(dev);
> - struct msm_dp *dp_display = platform_get_drvdata(pdev);
> - struct dp_display_private *dp;
> -
> - dp = container_of(dp_display, struct dp_display_private, dp_display);
> -
> - mutex_lock(&dp->event_mutex);
> -
> - drm_dbg_dp(dp->drm_dev,
> - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> - dp->dp_display.connector_type, dp->core_initialized,
> - dp->phy_initialized, dp_display->power_on);
> -
> - /* mainlink enabled */
> - if (dp_power_clk_status(dp->power, DP_CTRL_PM))
> - dp_ctrl_off_link_stream(dp->ctrl);
> -
> - dp_display_host_phy_exit(dp);
> -
> - /* host_init will be called at pm_resume */
> - dp_display_host_deinit(dp);
> -
> - dp->hpd_state = ST_SUSPENDED;
> -
> - drm_dbg_dp(dp->drm_dev,
> - "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
> - dp->dp_display.connector_type, dp->core_initialized,
> - dp->phy_initialized, dp_display->power_on);
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
>
> - mutex_unlock(&dp->event_mutex);
> + dp_display_host_init(dp);
> + if (dp->dp_display.is_edp) {
> + dp_catalog_ctrl_hpd_enable(dp->catalog);
> + dp_display_host_phy_init(dp);
> + }
>
> + enable_irq(dp->irq);
> return 0;
> }
>
> static const struct dev_pm_ops dp_pm_ops = {
> - .suspend = dp_pm_suspend,
> - .resume = dp_pm_resume,
> + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> };
>
> static struct platform_driver dp_display_driver = {
> @@ -1478,10 +1414,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
> aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>
> if (aux_bus && dp->is_edp) {
> - dp_display_host_init(dp_priv);
> - dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
> - dp_display_host_phy_init(dp_priv);
> -
> /*
> * The code below assumes that the panel will finish probing
> * by the time devm_of_dp_aux_populate_ep_devices() returns.
> @@ -1583,6 +1515,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
> dp_hpd_plug_handle(dp_display, 0);
>
> mutex_lock(&dp_display->event_mutex);
> + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
> + DRM_ERROR("failed to pm_runtime_resume\n");
> + mutex_unlock(&dp_display->event_mutex);
> + return;
> + }
>
> state = dp_display->hpd_state;
> if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
> @@ -1647,10 +1584,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> mutex_lock(&dp_display->event_mutex);
>
> state = dp_display->hpd_state;
> - if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) {
> - mutex_unlock(&dp_display->event_mutex);
> - return;
> - }
> + if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED)
> + drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n",
> + dp->connector_type, state);
>
> dp_display_disable(dp_display);
>
> @@ -1663,6 +1599,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> }
>
> drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
> +
> + pm_runtime_put_sync(&dp_display->pdev->dev);
> mutex_unlock(&dp_display->event_mutex);
> }
>
> @@ -1702,6 +1640,12 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
>
> mutex_lock(&dp->event_mutex);
> + if (pm_runtime_resume_and_get(&dp->pdev->dev)) {
> + DRM_ERROR("failed to start power\n");
> + mutex_unlock(&dp->event_mutex);
> + return;
> + }
> +
> dp_catalog_ctrl_hpd_enable(dp->catalog);
>
> /* enable HDP interrupts */
> @@ -1723,6 +1667,8 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> dp_catalog_ctrl_hpd_disable(dp->catalog);
>
> dp_display->internal_hpd = false;
> +
> + pm_runtime_put_sync(&dp->pdev->dev);
> mutex_unlock(&dp->event_mutex);
> }
>
> @@ -1737,13 +1683,10 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> if (dp_display->internal_hpd)
> return;
>
> - if (!dp->core_initialized) {
> - drm_dbg_dp(dp->drm_dev, "not initialized\n");
> - return;
> - }
> -
> - if (!dp_display->link_ready && status == connector_status_connected)
> + if (!dp_display->link_ready && status == connector_status_connected) {
> + dp->hpd_state = ST_DISCONNECTED;
Why? What has changed in this patch so that we have to set the
hpd_state? Also shouldn't this be handled in the event handler instead?
> dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> - else if (dp_display->link_ready && status == connector_status_disconnected)
> + } else if (dp_display->link_ready && status == connector_status_disconnected) {
> dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> + }
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> index 5cb84ca..863c766 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.c
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -152,20 +152,9 @@ int dp_power_client_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_enable(power->dev);
> -
> return dp_power_clk_init(power);
> }
>
> -void dp_power_client_deinit(struct dp_power *dp_power)
> -{
> - struct dp_power_private *power;
> -
> - power = container_of(dp_power, struct dp_power_private, dp_power);
> -
> - pm_runtime_disable(power->dev);
> -}
> -
> int dp_power_init(struct dp_power *dp_power)
> {
> int rc = 0;
> @@ -173,11 +162,7 @@ int dp_power_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_get_sync(power->dev);
> -
> rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> - if (rc)
> - pm_runtime_put_sync(power->dev);
>
> return rc;
> }
> @@ -189,7 +174,6 @@ int dp_power_deinit(struct dp_power *dp_power)
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> - pm_runtime_put_sync(power->dev);
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
> index a3dec20..55ada51 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.h
> +++ b/drivers/gpu/drm/msm/dp/dp_power.h
> @@ -81,17 +81,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
> int dp_power_client_init(struct dp_power *power);
>
> /**
> - * dp_power_clinet_deinit() - de-initialize clock and regulator modules
> - *
> - * @power: instance of power module
> - * return: 0 for success, error for failure.
> - *
> - * This API will de-initialize the DisplayPort's clocks and regulator
> - * modules.
> - */
> -void dp_power_client_deinit(struct dp_power *power);
> -
> -/**
> * dp_power_get() - configure and get the DisplayPort power module data
> *
> * @parser: instance of parser module
--
With best wishes
Dmitry
More information about the Freedreno
mailing list