[Freedreno] [PATCH v2] drm/panel: Enable DSC and CMD mode for Visionox VTDR6130 panel
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Mon Oct 9 10:32:02 UTC 2023
Hi Paloma,
On 28/07/2023 03:26, Paloma Arellano wrote:
> Enable display compression (DSC v1.2) and CMD mode for 1080x2400 Visionox
> VTDR6130 AMOLED DSI panel. In addition, this patch will set the default
> to command mode with DSC enabled.
>
> Note: This patch has only been validated DSC over command mode as DSC over
> video mode has never been validated for the MSM driver before.
I was able to test this on the QRD8550 on top of v6.6-rc5, display works fine,
but when runnning:
# modetest -r -v
<snip>
setting mode 1080x2400-144.00Hz on connectors 32, crtc 95
failed to set gamma: Function not implemented
freq: 74.22Hz
freq: 73.09Hz
freq: 72.48Hz
We get a correct 144Hz vsync test in video mode.
Do you know why this happens ?
Neil
>
> Depends on: "Add prepare_prev_first flag to Visionox VTDR6130" [1]
>
> Changes since v1:
> - Changed from email address
>
> [1] https://patchwork.freedesktop.org/series/121337/
>
> Suggested-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> Signed-off-by: Paloma Arellano <quic_parellan at quicinc.com>
> ---
> .../gpu/drm/panel/panel-visionox-vtdr6130.c | 77 ++++++++++++++++++-
> 1 file changed, 73 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> index e1363e128e7e..5658d39a3a6b 100644
> --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> @@ -9,6 +9,7 @@
> #include <linux/of.h>
>
> #include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
> #include <drm/drm_mipi_dsi.h>
> #include <drm/drm_modes.h>
> #include <drm/drm_panel.h>
> @@ -20,7 +21,8 @@ struct visionox_vtdr6130 {
> struct mipi_dsi_device *dsi;
> struct gpio_desc *reset_gpio;
> struct regulator_bulk_data supplies[3];
> - bool prepared;
> + bool prepared, enabled;
> + bool video_mode;
> };
>
> static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel)
> @@ -50,12 +52,18 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
> if (ret)
> return ret;
>
> + mipi_dsi_dcs_write_seq(dsi, 0x03, 0x01);
> mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x00, 0x00);
> mipi_dsi_dcs_write_seq(dsi, 0x59, 0x09);
> mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x01);
> mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x00);
> - mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
> +
> + if (ctx->video_mode)
> + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
> + else
> + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x02);
> +
> mipi_dsi_dcs_write_seq(dsi, 0x70,
> 0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04,
> 0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00,
> @@ -214,6 +222,42 @@ static const struct drm_display_mode visionox_vtdr6130_mode = {
> .height_mm = 157,
> };
>
> +static int visionox_vtdr6130_enable(struct drm_panel *panel)
> +{
> + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct drm_dsc_picture_parameter_set pps;
> + int ret;
> +
> + if (ctx->enabled)
> + return 0;
> +
> + if (!dsi->dsc) {
> + dev_err(&dsi->dev, "DSC not attached to DSI\n");
> + return -ENODEV;
> + }
> +
> + drm_dsc_pps_payload_pack(&pps, dsi->dsc);
> + ret = mipi_dsi_picture_parameter_set(dsi, &pps);
> + if (ret) {
> + dev_err(&dsi->dev, "Failed to set PPS\n");
> + return ret;
> + }
> +
> + ctx->enabled = true;
> +
> + return 0;
> +}
> +
> +static int visionox_vtdr6130_disable(struct drm_panel *panel)
> +{
> + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
> +
> + ctx->enabled = false;
> +
> + return 0;
> +}
> +
> static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
> struct drm_connector *connector)
> {
> @@ -237,6 +281,8 @@ static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = {
> .prepare = visionox_vtdr6130_prepare,
> .unprepare = visionox_vtdr6130_unprepare,
> .get_modes = visionox_vtdr6130_get_modes,
> + .enable = visionox_vtdr6130_enable,
> + .disable = visionox_vtdr6130_disable,
> };
>
> static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl)
> @@ -269,11 +315,31 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
> {
> struct device *dev = &dsi->dev;
> struct visionox_vtdr6130 *ctx;
> + struct drm_dsc_config *dsc;
> int ret;
>
> ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> if (!ctx)
> return -ENOMEM;
> +
> + ctx->video_mode = of_property_read_bool(dev->of_node, "enforce-video-mode");
> +
> + dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
> + if (!dsc)
> + return -ENOMEM;
> +
> + /* Set DSC params */
> + dsc->dsc_version_major = 0x1;
> + dsc->dsc_version_minor = 0x2;
> +
> + dsc->slice_height = 40;
> + dsc->slice_width = 540;
> + dsc->slice_count = 2;
> + dsc->bits_per_component = 8;
> + dsc->bits_per_pixel = 8 << 4;
> + dsc->block_pred_enable = true;
> +
> + dsi->dsc = dsc;
>
> ctx->supplies[0].supply = "vddio";
> ctx->supplies[1].supply = "vci";
> @@ -294,8 +360,11 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
>
> dsi->lanes = 4;
> dsi->format = MIPI_DSI_FMT_RGB888;
> - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
> - MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS;
> + if (ctx->video_mode)
> + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO;
> +
> ctx->panel.prepare_prev_first = true;
>
> drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,
More information about the Freedreno
mailing list