[Freedreno] [PATCH RFC 4/5] drm/msm: dpu1: call wb & sspp clk_force_ctrl op if split clock control

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Oct 9 17:07:01 UTC 2023


On 09/10/2023 19:36, Neil Armstrong wrote:
> Now clk_ctrl IDs can be optional and the clk_ctrl_reg can be specified
> on the SSPP & WB caps directly, pass the SSPP & WB hw struct to the
> qos & limit params then call the clk_force_ctrl() op accordingly.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>   .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c    |  4 +--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c          |  9 +++---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c           | 37 +++++++++++++++-------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.h           | 12 ++++---
>   4 files changed, 40 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> index 78037a697633..e4dfe0be7207 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> @@ -45,6 +45,7 @@ static void dpu_encoder_phys_wb_set_ot_limit(
>   	struct dpu_vbif_set_ot_params ot_params;
>   
>   	memset(&ot_params, 0, sizeof(ot_params));
> +	ot_params.wb = hw_wb;
>   	ot_params.xin_id = hw_wb->caps->xin_id;
>   	ot_params.num = hw_wb->idx - WB_0;
>   	ot_params.width = phys_enc->cached_mode.hdisplay;
> @@ -52,7 +53,6 @@ static void dpu_encoder_phys_wb_set_ot_limit(
>   	ot_params.is_wfd = true;
>   	ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode);
>   	ot_params.vbif_idx = hw_wb->caps->vbif_idx;
> -	ot_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>   	ot_params.rd = false;
>   
>   	dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params);
> @@ -81,9 +81,9 @@ static void dpu_encoder_phys_wb_set_qos_remap(
>   	hw_wb = phys_enc->hw_wb;
>   
>   	memset(&qos_params, 0, sizeof(qos_params));
> +	qos_params.wb = hw_wb;
>   	qos_params.vbif_idx = hw_wb->caps->vbif_idx;
>   	qos_params.xin_id = hw_wb->caps->xin_id;
> -	qos_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>   	qos_params.num = hw_wb->idx - WB_0;
>   	qos_params.is_rt = false;
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index c2aaaded07ed..b0b662068377 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -350,6 +350,7 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
>   	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
>   
>   	memset(&ot_params, 0, sizeof(ot_params));
> +	ot_params.sspp = pipe->sspp;
>   	ot_params.xin_id = pipe->sspp->cap->xin_id;
>   	ot_params.num = pipe->sspp->idx - SSPP_NONE;
>   	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
> @@ -357,7 +358,6 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
>   	ot_params.is_wfd = !pdpu->is_rt_pipe;
>   	ot_params.frame_rate = frame_rate;
>   	ot_params.vbif_idx = VBIF_RT;
> -	ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
>   	ot_params.rd = true;
>   
>   	dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
> @@ -377,16 +377,15 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
>   
>   	memset(&qos_params, 0, sizeof(qos_params));
>   	qos_params.vbif_idx = VBIF_RT;
> -	qos_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
> +	qos_params.sspp = pipe->sspp;
>   	qos_params.xin_id = pipe->sspp->cap->xin_id;
>   	qos_params.num = pipe->sspp->idx - SSPP_VIG0;
>   	qos_params.is_rt = pdpu->is_rt_pipe;
>   
> -	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
> +	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d\n",
>   			qos_params.num,
>   			qos_params.vbif_idx,
> -			qos_params.xin_id, qos_params.is_rt,
> -			qos_params.clk_ctrl);
> +			qos_params.xin_id, qos_params.is_rt);
>   
>   	dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
>   }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> index 2ae5cba1848b..a79559084a91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> @@ -158,11 +158,19 @@ static u32 _dpu_vbif_get_ot_limit(struct dpu_hw_vbif *vbif,
>   	return ot_lim;
>   }
>   
> -static bool dpu_vbif_setup_clk_force_ctrl(struct dpu_hw_mdp *mdp,
> -					  unsigned int clk_ctrl,
> +static bool dpu_vbif_setup_clk_force_ctrl(struct dpu_hw_sspp *sspp,
> +					  struct dpu_hw_wb *wb,
> +					  struct dpu_hw_mdp *mdp,
>   					  bool enable)
>   {
> -	return mdp->ops.setup_clk_force_ctrl(mdp, clk_ctrl, enable);
> +	if (sspp && sspp->cap->clk_ctrl_reg)
> +		return sspp->ops.setup_clk_force_ctrl(sspp, enable);
> +	else if (wb && wb->caps->clk_ctrl_reg)
> +		return wb->ops.setup_clk_force_ctrl(wb, enable);
> +	else

This is what I wanted to avoid.

If we move the caller function to the sspp / WB, we will not need this 
kind of wrapper.

> +		return mdp->ops.setup_clk_force_ctrl(mdp,
> +				sspp ? sspp->cap->clk_ctrl : wb->caps->clk_ctrl,
> +				enable);
>   }
>   
>   /**
> @@ -190,9 +198,13 @@ void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
>   		return;
>   	}
>   
> -	if (!mdp->ops.setup_clk_force_ctrl ||
> -			!vbif->ops.set_limit_conf ||
> -			!vbif->ops.set_halt_ctrl)
> +	if ((!params->sspp && !params->wb) ||
> +	    (params->sspp && !params->sspp->ops.setup_clk_force_ctrl) ||
> +	    (params->wb && !params->wb->ops.setup_clk_force_ctrl) ||
> +	    !mdp->ops.setup_clk_force_ctrl)
> +		return;
> +
> +	if (!vbif->ops.set_limit_conf || !vbif->ops.set_halt_ctrl)
>   		return;
>   
>   	/* set write_gather_en for all write clients */
> @@ -207,7 +219,7 @@ void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
>   	trace_dpu_perf_set_ot(params->num, params->xin_id, ot_lim,
>   		params->vbif_idx);
>   
> -	forced_on = dpu_vbif_setup_clk_force_ctrl(mdp, params->clk_ctrl, true);
> +	forced_on = dpu_vbif_setup_clk_force_ctrl(params->sspp, params->wb, mdp, true);

I'd suggest removing the setup_clk_force_ctrl from 
dpu_vbif_set_ot_limit() and dpu_vbif_set_qos_remap(). Instead make 
dpu_plane / dpu_encoder_phys_wb call into dpu_hw_sspp / dpu_hw_wb, which 
will enable the clock, call dpu_vbif then disable the clock.

In my opinion this is simpler than the condition in the previous chunk.

>   
>   	vbif->ops.set_limit_conf(vbif, params->xin_id, params->rd, ot_lim);
>   
> @@ -220,7 +232,7 @@ void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
>   	vbif->ops.set_halt_ctrl(vbif, params->xin_id, false);
>   
>   	if (forced_on)
> -		dpu_vbif_setup_clk_force_ctrl(mdp,  params->clk_ctrl, false);
> +		dpu_vbif_setup_clk_force_ctrl(params->sspp, params->wb, mdp, false);
>   }
>   
>   void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
> @@ -245,7 +257,10 @@ void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
>   		return;
>   	}
>   
> -	if (!vbif->ops.set_qos_remap || !mdp->ops.setup_clk_force_ctrl) {
> +	if ((!params->sspp && !params->wb) ||
> +	    (params->sspp && !params->sspp->ops.setup_clk_force_ctrl) ||
> +	    (params->wb && !params->wb->ops.setup_clk_force_ctrl) ||
> +	    !mdp->ops.setup_clk_force_ctrl || !vbif->ops.set_qos_remap) {
>   		DRM_DEBUG_ATOMIC("qos remap not supported\n");
>   		return;
>   	}
> @@ -258,7 +273,7 @@ void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
>   		return;
>   	}
>   
> -	forced_on = dpu_vbif_setup_clk_force_ctrl(mdp, params->clk_ctrl, true);
> +	forced_on = dpu_vbif_setup_clk_force_ctrl(params->sspp, params->wb, mdp, true);
>   
>   	for (i = 0; i < qos_tbl->npriority_lvl; i++) {
>   		DRM_DEBUG_ATOMIC("%s xin:%d lvl:%d/%d\n",
> @@ -269,7 +284,7 @@ void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
>   	}
>   
>   	if (forced_on)
> -		dpu_vbif_setup_clk_force_ctrl(mdp, params->clk_ctrl, false);
> +		dpu_vbif_setup_clk_force_ctrl(params->sspp, params->wb, mdp, false);
>   }
>   
>   void dpu_vbif_clear_errors(struct dpu_kms *dpu_kms)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.h
> index ab490177d886..a4fe76e390d9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.h
> @@ -7,7 +7,12 @@
>   
>   #include "dpu_kms.h"
>   
> +struct dpu_hw_sspp;
> +struct dpu_hw_wb;
> +
>   struct dpu_vbif_set_ot_params {
> +	struct dpu_hw_sspp *sspp;
> +	struct dpu_hw_wb *wb;
>   	u32 xin_id;
>   	u32 num;
>   	u32 width;
> @@ -16,28 +21,27 @@ struct dpu_vbif_set_ot_params {
>   	bool rd;
>   	bool is_wfd;
>   	u32 vbif_idx;
> -	u32 clk_ctrl;
>   };
>   
>   struct dpu_vbif_set_memtype_params {
>   	u32 xin_id;
>   	u32 vbif_idx;
> -	u32 clk_ctrl;
>   	bool is_cacheable;
>   };
>   
>   /**
>    * struct dpu_vbif_set_qos_params - QoS remapper parameter
> + * @sspp: backing SSPP
>    * @vbif_idx: vbif identifier
>    * @xin_id: client interface identifier
> - * @clk_ctrl: clock control identifier of the xin
>    * @num: pipe identifier (debug only)
>    * @is_rt: true if pipe is used in real-time use case
>    */
>   struct dpu_vbif_set_qos_params {
> +	struct dpu_hw_sspp *sspp;
> +	struct dpu_hw_wb *wb;
>   	u32 vbif_idx;
>   	u32 xin_id;
> -	u32 clk_ctrl;
>   	u32 num;
>   	bool is_rt;
>   };
> 

-- 
With best wishes
Dmitry



More information about the Freedreno mailing list