[Freedreno] [PATCH 5/8] drm/msm: dpu1: add support for SM8650 DPU
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Oct 25 07:49:09 UTC 2023
On Wed, 25 Oct 2023 at 10:35, Neil Armstrong <neil.armstrong at linaro.org> wrote:
>
> Add DPU version 10.0 support for the SM8650 platform.
>
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
Thanks for your patch. Could you please rebase it on top of
https://patchwork.freedesktop.org/series/119804/ ?
> ---
> .../drm/msm/disp/dpu1/catalog/dpu_10_0_sm8650.h | 458 +++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 23 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> 5 files changed, 486 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_0_sm8650.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_0_sm8650.h
> new file mode 100644
> index 000000000000..3a37d78804e7
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_0_sm8650.h
> @@ -0,0 +1,458 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DPU_10_0_SM8650_H
> +#define _DPU_10_0_SM8650_H
> +
> +static const struct dpu_caps sm8650_dpu_caps = {
> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> + .max_mixer_blendstages = 0xb,
> + .qseed_type = DPU_SSPP_SCALER_QSEED4,
> + .has_src_split = true,
> + .has_dim_layer = true,
> + .has_idle_pc = true,
> + .has_3d_merge = true,
> + .max_linewidth = 8192,
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +};
> +
> +static const struct dpu_mdp_cfg sm8650_mdp = {
> + .name = "top_0",
> + .base = 0, .len = 0x494,
> + .features = BIT(DPU_MDP_PERIPH_0_REMOVED),
> + .clk_ctrls = {
> + [DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
> + },
> +};
> +
> +/* FIXME: get rid of DPU_CTL_SPLIT_DISPLAY in favour of proper ACTIVE_CTL support */
> +static const struct dpu_ctl_cfg sm8650_ctl[] = {
> + {
> + .name = "ctl_0", .id = CTL_0,
> + .base = 0x15000, .len = 0x1000,
> + .features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> + }, {
> + .name = "ctl_1", .id = CTL_1,
> + .base = 0x16000, .len = 0x1000,
> + .features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> + }, {
> + .name = "ctl_2", .id = CTL_2,
> + .base = 0x17000, .len = 0x1000,
> + .features = CTL_SM8550_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> + }, {
> + .name = "ctl_3", .id = CTL_3,
> + .base = 0x18000, .len = 0x1000,
> + .features = CTL_SM8550_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> + }, {
> + .name = "ctl_4", .id = CTL_4,
> + .base = 0x19000, .len = 0x1000,
> + .features = CTL_SM8550_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> + }, {
> + .name = "ctl_5", .id = CTL_5,
> + .base = 0x1a000, .len = 0x1000,
> + .features = CTL_SM8550_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> + },
> +};
> +
> +static const struct dpu_sspp_cfg sm8650_sspp[] = {
> + {
> + .name = "sspp_0", .id = SSPP_VIG0,
> + .base = 0x4000, .len = 0x344,
> + .features = VIG_SC7180_MASK,
Could you please use _SDMA mask here after testing that SmartDMA works
as expected?
> + .sblk = &sm8550_vig_sblk_0,
> + .xin_id = 0,
> + .type = SSPP_TYPE_VIG,
> + }, {
> + .name = "sspp_1", .id = SSPP_VIG1,
> + .base = 0x6000, .len = 0x344,
> + .features = VIG_SC7180_MASK,
> + .sblk = &sm8550_vig_sblk_1,
> + .xin_id = 4,
> + .type = SSPP_TYPE_VIG,
> + }, {
> + .name = "sspp_2", .id = SSPP_VIG2,
> + .base = 0x8000, .len = 0x344,
> + .features = VIG_SC7180_MASK,
> + .sblk = &sm8550_vig_sblk_2,
> + .xin_id = 8,
> + .type = SSPP_TYPE_VIG,
> + }, {
> + .name = "sspp_3", .id = SSPP_VIG3,
> + .base = 0xa000, .len = 0x344,
> + .features = VIG_SC7180_MASK,
> + .sblk = &sm8550_vig_sblk_3,
> + .xin_id = 12,
> + .type = SSPP_TYPE_VIG,
> + }, {
> + .name = "sspp_8", .id = SSPP_DMA0,
> + .base = 0x24000, .len = 0x344,
> + .features = DMA_SDM845_MASK,
> + .sblk = &sdm845_dma_sblk_0,
> + .xin_id = 1,
> + .type = SSPP_TYPE_DMA,
> + }, {
> + .name = "sspp_9", .id = SSPP_DMA1,
> + .base = 0x26000, .len = 0x344,
> + .features = DMA_SDM845_MASK,
> + .sblk = &sdm845_dma_sblk_1,
> + .xin_id = 5,
> + .type = SSPP_TYPE_DMA,
> + }, {
> + .name = "sspp_10", .id = SSPP_DMA2,
> + .base = 0x28000, .len = 0x344,
> + .features = DMA_SDM845_MASK,
> + .sblk = &sdm845_dma_sblk_2,
> + .xin_id = 9,
> + .type = SSPP_TYPE_DMA,
> + }, {
> + .name = "sspp_11", .id = SSPP_DMA3,
> + .base = 0x2a000, .len = 0x344,
> + .features = DMA_SDM845_MASK,
> + .sblk = &sdm845_dma_sblk_3,
> + .xin_id = 13,
> + .type = SSPP_TYPE_DMA,
> + }, {
> + .name = "sspp_12", .id = SSPP_DMA4,
> + .base = 0x2c000, .len = 0x344,
> + .features = DMA_CURSOR_SDM845_MASK,
> + .sblk = &sm8550_dma_sblk_4,
> + .xin_id = 14,
> + .type = SSPP_TYPE_DMA,
> + }, {
> + .name = "sspp_13", .id = SSPP_DMA5,
> + .base = 0x2e000, .len = 0x344,
> + .features = DMA_CURSOR_SDM845_MASK,
> + .sblk = &sm8550_dma_sblk_5,
> + .xin_id = 15,
> + .type = SSPP_TYPE_DMA,
> + },
> +};
> +
> +static const struct dpu_lm_cfg sm8650_lm[] = {
> + {
> + .name = "lm_0", .id = LM_0,
> + .base = 0x44000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_1,
> + .pingpong = PINGPONG_0,
> + .dspp = DSPP_0,
> + }, {
> + .name = "lm_1", .id = LM_1,
> + .base = 0x45000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_0,
> + .pingpong = PINGPONG_1,
> + .dspp = DSPP_1,
> + }, {
> + .name = "lm_2", .id = LM_2,
> + .base = 0x46000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_3,
> + .pingpong = PINGPONG_2,
> + }, {
> + .name = "lm_3", .id = LM_3,
> + .base = 0x47000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_2,
> + .pingpong = PINGPONG_3,
> + }, {
> + .name = "lm_4", .id = LM_4,
> + .base = 0x48000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_5,
> + .pingpong = PINGPONG_4,
> + }, {
> + .name = "lm_5", .id = LM_5,
> + .base = 0x49000, .len = 0x400,
> + .features = MIXER_SDM845_MASK,
> + .sblk = &sdm845_lm_sblk,
> + .lm_pair = LM_4,
> + .pingpong = PINGPONG_5,
> + },
> +};
> +
> +static const struct dpu_dspp_cfg sm8650_dspp[] = {
> + {
> + .name = "dspp_0", .id = DSPP_0,
> + .base = 0x54000, .len = 0x1800,
> + .features = DSPP_SC7180_MASK,
> + .sblk = &sdm845_dspp_sblk,
> + }, {
> + .name = "dspp_1", .id = DSPP_1,
> + .base = 0x56000, .len = 0x1800,
> + .features = DSPP_SC7180_MASK,
> + .sblk = &sdm845_dspp_sblk,
> + }, {
> + .name = "dspp_2", .id = DSPP_2,
> + .base = 0x58000, .len = 0x1800,
> + .features = DSPP_SC7180_MASK,
> + .sblk = &sdm845_dspp_sblk,
> + }, {
> + .name = "dspp_3", .id = DSPP_3,
> + .base = 0x5a000, .len = 0x1800,
> + .features = DSPP_SC7180_MASK,
> + .sblk = &sdm845_dspp_sblk,
> + },
> +};
> +
> +static const struct dpu_pingpong_cfg sm8650_pp[] = {
> + {
> + .name = "pingpong_0", .id = PINGPONG_0,
> + .base = 0x69000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_0,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> + }, {
> + .name = "pingpong_1", .id = PINGPONG_1,
> + .base = 0x6a000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_0,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
> + }, {
> + .name = "pingpong_2", .id = PINGPONG_2,
> + .base = 0x6b000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_1,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> + }, {
> + .name = "pingpong_3", .id = PINGPONG_3,
> + .base = 0x6c000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_1,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
> + }, {
> + .name = "pingpong_4", .id = PINGPONG_4,
> + .base = 0x6d000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_2,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
> + }, {
> + .name = "pingpong_5", .id = PINGPONG_5,
> + .base = 0x6e000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_2,
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
> + }, {
> + .name = "pingpong_6", .id = PINGPONG_6,
> + .base = 0x66000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_3,
> + }, {
> + .name = "pingpong_7", .id = PINGPONG_7,
> + .base = 0x66400, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_3,
> + }, {
> + .name = "pingpong_8", .id = PINGPONG_8,
> + .base = 0x7e000, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_4,
> + }, {
> + .name = "pingpong_9", .id = PINGPONG_9,
> + .base = 0x7e400, .len = 0,
> + .features = BIT(DPU_PINGPONG_DITHER),
> + .sblk = &sc7280_pp_sblk,
> + .merge_3d = MERGE_3D_4,
> + },
> +};
> +
> +static const struct dpu_merge_3d_cfg sm8650_merge_3d[] = {
> + {
> + .name = "merge_3d_0", .id = MERGE_3D_0,
> + .base = 0x4e000, .len = 0x8,
> + }, {
> + .name = "merge_3d_1", .id = MERGE_3D_1,
> + .base = 0x4f000, .len = 0x8,
> + }, {
> + .name = "merge_3d_2", .id = MERGE_3D_2,
> + .base = 0x50000, .len = 0x8,
> + }, {
> + .name = "merge_3d_3", .id = MERGE_3D_3,
> + .base = 0x66700, .len = 0x8,
> + }, {
> + .name = "merge_3d_4", .id = MERGE_3D_4,
> + .base = 0x7e700, .len = 0x8,
> + },
> +};
> +
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg sm8650_dsc[] = {
> + {
> + .name = "dce_0_0", .id = DSC_0,
> + .base = 0x80000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
> + .sblk = &dsc_sblk_0,
> + }, {
> + .name = "dce_0_1", .id = DSC_1,
> + .base = 0x80000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
> + .sblk = &dsc_sblk_1,
> + }, {
> + .name = "dce_1_0", .id = DSC_2,
> + .base = 0x81000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
> + .sblk = &dsc_sblk_0,
> + }, {
> + .name = "dce_1_1", .id = DSC_3,
> + .base = 0x81000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
> + .sblk = &dsc_sblk_1,
> + }, {
> + .name = "dce_2_0", .id = DSC_4,
> + .base = 0x82000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2),
> + .sblk = &dsc_sblk_0,
> + }, {
> + .name = "dce_2_1", .id = DSC_5,
> + .base = 0x82000, .len = 0x6,
> + .features = BIT(DPU_DSC_HW_REV_1_2),
> + .sblk = &dsc_sblk_1,
> + },
> +};
> +
> +static const struct dpu_wb_cfg sm8650_wb[] = {
> + {
> + .name = "wb_2", .id = WB_2,
> + .base = 0x65000, .len = 0x2c8,
> + .features = WB_SM8250_MASK,
> + .format_list = wb2_formats,
> + .num_formats = ARRAY_SIZE(wb2_formats),
> + .xin_id = 6,
> + .vbif_idx = VBIF_RT,
> + .maxlinewidth = 4096,
> + .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
> + },
> +};
> +
> +static const struct dpu_intf_cfg sm8650_intf[] = {
> + {
> + .name = "intf_0", .id = INTF_0,
> + .base = 0x34000, .len = 0x280,
> + .features = INTF_SC7280_MASK,
> + .type = INTF_DP,
> + .controller_id = MSM_DP_CONTROLLER_0,
> + .prog_fetch_lines_worst_case = 24,
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
> + }, {
> + .name = "intf_1", .id = INTF_1,
> + .base = 0x35000, .len = 0x300,
> + .features = INTF_SC7280_MASK,
> + .type = INTF_DSI,
> + .controller_id = MSM_DSI_CONTROLLER_0,
> + .prog_fetch_lines_worst_case = 24,
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
> + .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
> + }, {
> + .name = "intf_2", .id = INTF_2,
> + .base = 0x36000, .len = 0x300,
> + .features = INTF_SC7280_MASK,
> + .type = INTF_DSI,
> + .controller_id = MSM_DSI_CONTROLLER_1,
> + .prog_fetch_lines_worst_case = 24,
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
> + .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
> + }, {
> + .name = "intf_3", .id = INTF_3,
> + .base = 0x37000, .len = 0x280,
> + .features = INTF_SC7280_MASK,
> + .type = INTF_DP,
> + .controller_id = MSM_DP_CONTROLLER_1,
> + .prog_fetch_lines_worst_case = 24,
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
> + },
> +};
> +
> +static const struct dpu_perf_cfg sm8650_perf_data = {
> + .max_bw_low = 17000000,
> + .max_bw_high = 27000000,
> + .min_core_ib = 2500000,
> + .min_llcc_ib = 0,
> + .min_dram_ib = 800000,
> + .min_prefill_lines = 35,
> + /* FIXME: lut tables */
> + .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
> + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
> + .qos_lut_tbl = {
> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> + .entries = sc7180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> + .entries = sc7180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = {
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> + .clk_inefficiency_factor = 105,
> + .bw_inefficiency_factor = 120,
> +};
> +
> +static const struct dpu_mdss_version sm8650_mdss_ver = {
> + .core_major_ver = 10,
> + .core_minor_ver = 0,
> +};
> +
> +const struct dpu_mdss_cfg dpu_sm8650_cfg = {
> + .mdss_ver = &sm8650_mdss_ver,
> + .caps = &sm8650_dpu_caps,
> + .mdp = &sm8650_mdp,
> + .ctl_count = ARRAY_SIZE(sm8650_ctl),
> + .ctl = sm8650_ctl,
> + .sspp_count = ARRAY_SIZE(sm8650_sspp),
> + .sspp = sm8650_sspp,
> + .mixer_count = ARRAY_SIZE(sm8650_lm),
> + .mixer = sm8650_lm,
> + .dspp_count = ARRAY_SIZE(sm8650_dspp),
> + .dspp = sm8650_dspp,
> + .pingpong_count = ARRAY_SIZE(sm8650_pp),
> + .pingpong = sm8650_pp,
> + .dsc_count = ARRAY_SIZE(sm8650_dsc),
> + .dsc = sm8650_dsc,
> + .merge_3d_count = ARRAY_SIZE(sm8650_merge_3d),
> + .merge_3d = sm8650_merge_3d,
> + .wb_count = ARRAY_SIZE(sm8650_wb),
> + .wb = sm8650_wb,
> + .intf_count = ARRAY_SIZE(sm8650_intf),
> + .intf = sm8650_intf,
> + .vbif_count = ARRAY_SIZE(sm8650_vbif),
> + .vbif = sm8650_vbif,
> + .perf = &sm8650_perf_data,
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index a1aada630780..0b8af44e12dd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -472,6 +472,7 @@ static const u32 msm8998_rt_pri_lvl[] = {1, 2, 2, 2};
> static const u32 msm8998_nrt_pri_lvl[] = {1, 1, 1, 1};
> static const u32 sdm845_rt_pri_lvl[] = {3, 3, 4, 4, 5, 5, 6, 6};
> static const u32 sdm845_nrt_pri_lvl[] = {3, 3, 3, 3, 3, 3, 3, 3};
> +static const u32 sm8650_rt_pri_lvl[] = {4, 4, 5, 5, 5, 5, 6};
Just 7 of them?
>
> static const struct dpu_vbif_dynamic_ot_cfg msm8998_ot_rdwr_cfg[] = {
> {
> @@ -558,6 +559,26 @@ static const struct dpu_vbif_cfg sm8550_vbif[] = {
> },
> };
>
> +static const struct dpu_vbif_cfg sm8650_vbif[] = {
> + {
> + .name = "vbif_rt", .id = VBIF_RT,
> + .base = 0, .len = 0x1074,
> + .features = BIT(DPU_VBIF_QOS_REMAP),
> + .xin_halt_timeout = 0x4000,
> + .qos_rp_remap_size = 0x40,
> + .qos_rt_tbl = {
> + .npriority_lvl = ARRAY_SIZE(sm8650_rt_pri_lvl),
> + .priority_lvl = sm8650_rt_pri_lvl,
> + },
> + .qos_nrt_tbl = {
> + .npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
> + .priority_lvl = sdm845_nrt_pri_lvl,
> + },
> + .memtype_count = 16,
> + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
> + },
> +};
> +
> /*************************************************************
> * PERF data config
> *************************************************************/
> @@ -673,3 +694,5 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
> #include "catalog/dpu_8_1_sm8450.h"
>
> #include "catalog/dpu_9_0_sm8550.h"
> +
> +#include "catalog/dpu_10_0_sm8650.h"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index df024e10d3a3..92cce867a7e0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -841,5 +841,6 @@ extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
> extern const struct dpu_mdss_cfg dpu_sc8280xp_cfg;
> extern const struct dpu_mdss_cfg dpu_sm8450_cfg;
> extern const struct dpu_mdss_cfg dpu_sm8550_cfg;
> +extern const struct dpu_mdss_cfg dpu_sm8650_cfg;
>
> #endif /* _DPU_HW_CATALOG_H */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d85157acfbf8..a6702b2bfc68 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -195,6 +195,8 @@ enum dpu_pingpong {
> PINGPONG_5,
> PINGPONG_6,
> PINGPONG_7,
> + PINGPONG_8,
> + PINGPONG_9,
> PINGPONG_S0,
> PINGPONG_MAX
> };
> @@ -204,6 +206,7 @@ enum dpu_merge_3d {
> MERGE_3D_1,
> MERGE_3D_2,
> MERGE_3D_3,
> + MERGE_3D_4,
> MERGE_3D_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index fe7267b3bff5..4a017064207f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1363,6 +1363,7 @@ static const struct of_device_id dpu_dt_match[] = {
> { .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
> { .compatible = "qcom,sm8450-dpu", .data = &dpu_sm8450_cfg, },
> { .compatible = "qcom,sm8550-dpu", .data = &dpu_sm8550_cfg, },
> + { .compatible = "qcom,sm8650-dpu", .data = &dpu_sm8650_cfg, },
> {}
> };
> MODULE_DEVICE_TABLE(of, dpu_dt_match);
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list