[Freedreno] [PATCH v3 4/7] drm/msm/dp: incorporate pm_runtime framework into DP driver
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Sep 16 01:07:58 UTC 2023
On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>
> Currently DP driver is executed independent of PM runtime framework.
> This lead DP driver incompatible with others. Incorporating pm runtime
Why is it incompatible? Which others are mentioned here?
> framework into DP driver so that both power and clocks to enable/disable
> host controller fits with PM runtime mechanism. Once pm runtime framework
> is incorporated into DP driver, wake up device from power up path is not
> necessary. Hence remove it. Both EV_POWER_PM_GET and EV_POWER_PM_PUT events
> are introduced to perform pm runtime control for the HPD GPIO routing to a
> display-connector case.
>
> Changes in v3:
> -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
> -- use pm_runtime_resume_and_get() instead of pm_runtime_get()
> -- error checking pm_runtime_resume_and_get() return value
> -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
Previous changelog?
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
> drivers/gpu/drm/msm/dp/dp_aux.c | 5 ++
> drivers/gpu/drm/msm/dp/dp_display.c | 114 +++++++++++++++++++++++++++---------
> drivers/gpu/drm/msm/dp/dp_power.c | 9 ---
> 3 files changed, 90 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 8e3b677..8fa93c5 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -291,6 +291,9 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
> return -EINVAL;
> }
>
> + if (pm_runtime_resume_and_get(dp_aux->dev))
> + return -EINVAL;
Please propagate error values instead of reinventing them.
> +
> mutex_lock(&aux->mutex);
> if (!aux->initted) {
> ret = -EIO;
> @@ -364,6 +367,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>
> exit:
> mutex_unlock(&aux->mutex);
> + pm_runtime_mark_last_busy(dp_aux->dev);
> + pm_runtime_put_autosuspend(dp_aux->dev);
What is the reason for using autosuspend? Such design decisions should
be described in the commit message.
>
> return ret;
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 59f9d85..e7af7f7 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -60,6 +60,8 @@ enum {
> EV_IRQ_HPD_INT,
> EV_HPD_UNPLUG_INT,
> EV_USER_NOTIFICATION,
> + EV_POWER_PM_GET,
> + EV_POWER_PM_PUT,
> };
>
> #define EVENT_TIMEOUT (HZ/10) /* 100ms */
> @@ -276,13 +278,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
> dp->dp_display.drm_dev = drm;
> priv->dp[dp->id] = &dp->dp_display;
>
> - rc = dp->parser->parse(dp->parser);
> - if (rc) {
> - DRM_ERROR("device tree parsing failed\n");
> - goto end;
> - }
> -
> -
> dp->drm_dev = drm;
> dp->aux->drm_dev = drm;
> rc = dp_aux_register(dp->aux);
> @@ -291,12 +286,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
> goto end;
> }
>
> - rc = dp_power_client_init(dp->power);
> - if (rc) {
> - DRM_ERROR("Power client create failed\n");
> - goto end;
> - }
> -
> rc = dp_register_audio_driver(dev, dp->audio);
> if (rc) {
> DRM_ERROR("Audio registration Dp failed\n");
> @@ -320,10 +309,6 @@ static void dp_display_unbind(struct device *dev, struct device *master,
> struct dp_display_private *dp = dev_get_dp_display_private(dev);
> struct msm_drm_private *priv = dev_get_drvdata(master);
>
> - /* disable all HPD interrupts */
> - if (dp->core_initialized)
> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
> -
> kthread_stop(dp->ev_tsk);
>
> of_dp_aux_depopulate_bus(dp->aux);
> @@ -467,6 +452,18 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
> dp->core_initialized = false;
> }
>
> +static void dp_display_pm_get(struct dp_display_private *dp)
> +{
> + if (pm_runtime_resume_and_get(&dp->pdev->dev))
> + DRM_ERROR("failed to start power\n");
> +}
Huge NAK here. This means that the error is completely ignored (other
than being dumped to the log). This is a short path to Sync error and
other kinds of reboot.
> +
> +static void dp_display_pm_put(struct dp_display_private *dp)
> +{
> + pm_runtime_mark_last_busy(&dp->pdev->dev);
> + pm_runtime_put_autosuspend(&dp->pdev->dev);
> +}
> +
> static int dp_display_usbpd_configure_cb(struct device *dev)
> {
> struct dp_display_private *dp = dev_get_dp_display_private(dev);
> @@ -1096,7 +1093,6 @@ static int hpd_event_thread(void *data)
>
> switch (todo->event_id) {
> case EV_HPD_INIT_SETUP:
> - dp_display_host_init(dp_priv);
> break;
> case EV_HPD_PLUG_INT:
> dp_hpd_plug_handle(dp_priv, todo->data);
> @@ -1111,6 +1107,12 @@ static int hpd_event_thread(void *data)
> dp_display_send_hpd_notification(dp_priv,
> todo->data);
> break;
> + case EV_POWER_PM_GET:
> + dp_display_pm_get(dp_priv);
> + break;
> + case EV_POWER_PM_PUT:
> + dp_display_pm_put(dp_priv);
> + break;
No. runtime_get / runtime_put are not HPD events. They should be
executed directly from the place where the drivers needs the device to
be powered up.
> default:
> break;
> }
> @@ -1251,6 +1253,18 @@ static int dp_display_probe(struct platform_device *pdev)
> return -EPROBE_DEFER;
> }
>
> + rc = dp->parser->parse(dp->parser);
> + if (rc) {
> + DRM_ERROR("device tree parsing failed\n");
> + return -EPROBE_DEFER;
> + }
> +
> + rc = dp_power_client_init(dp->power);
> + if (rc) {
> + DRM_ERROR("Power client create failed\n");
> + return -EPROBE_DEFER;
> + }
Why? This moves resource allocation to the probe function, which is
irrelevant to the pm_runtime code. If this is required, you can move
these changes to a separate patch.
> +
> /* setup event q */
> mutex_init(&dp->event_mutex);
> init_waitqueue_head(&dp->event_q);
> @@ -1263,6 +1277,10 @@ static int dp_display_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, &dp->dp_display);
>
> + devm_pm_runtime_enable(&pdev->dev);
error code handling?
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> rc = dp_display_request_irq(dp);
> if (rc)
> return rc;
> @@ -1285,6 +1303,36 @@ static int dp_display_remove(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, NULL);
>
> + pm_runtime_put_sync_suspend(&pdev->dev);
Why? Who is holding the pm count here?
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
Why do you need _disable if you have a devm_pm_runtime_enable()? Not
to mention that pm_runtime_disable_action() already has a call to
pm_runtime_dont_use_autosuspend()
> +
> + return 0;
> +}
> +
> +static int dp_pm_runtime_suspend(struct device *dev)
> +{
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
> +
> + if (dp->dp_display.is_edp) {
> + dp_display_host_phy_exit(dp);
> + dp_catalog_ctrl_hpd_disable(dp->catalog);
> + }
> + dp_display_host_deinit(dp);
> +
> + return 0;
> +}
> +
> +static int dp_pm_runtime_resume(struct device *dev)
> +{
> + struct dp_display_private *dp = dev_get_dp_display_private(dev);
> +
> + dp_display_host_init(dp);
> + if (dp->dp_display.is_edp) {
> + dp_catalog_ctrl_hpd_enable(dp->catalog);
> + dp_display_host_phy_init(dp);
> + }
> +
> return 0;
> }
>
> @@ -1389,6 +1437,7 @@ static int dp_pm_suspend(struct device *dev)
> }
>
> static const struct dev_pm_ops dp_pm_ops = {
> + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
> .suspend = dp_pm_suspend,
> .resume = dp_pm_resume,
> };
> @@ -1473,10 +1522,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
> aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>
> if (aux_bus && dp->is_edp) {
> - dp_display_host_init(dp_priv);
> - dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
> - dp_display_host_phy_init(dp_priv);
> -
> /*
> * The code below assumes that the panel will finish probing
> * by the time devm_of_dp_aux_populate_ep_devices() returns.
> @@ -1578,6 +1623,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
> dp_hpd_plug_handle(dp_display, 0);
>
> mutex_lock(&dp_display->event_mutex);
> + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
> + DRM_ERROR("failed to start power\n");
> + mutex_unlock(&dp_display->event_mutex);
> + return;
> + }
>
> state = dp_display->hpd_state;
> if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
> @@ -1658,6 +1708,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> }
>
> drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
> +
> + pm_runtime_put_sync(&dp_display->pdev->dev);
So, no autosuspend now?
Also, I think we can get an unbalanced runtime status, as there is no
guarantee that atomic_enable / atomic_disable will be paired. Please
correct me if I'm wrong.
And also there is a possible return earlier in this function. The
driver will leak the runtime status again.
> mutex_unlock(&dp_display->event_mutex);
> }
>
> @@ -1697,6 +1749,9 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
>
> mutex_lock(&dp->event_mutex);
> + if (pm_runtime_resume_and_get(&dp->pdev->dev))
> + DRM_ERROR("failed to start power\n");
Return?
> +
> dp_catalog_ctrl_hpd_enable(dp->catalog);
>
> /* enable HDP interrupts */
> @@ -1718,6 +1773,9 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> dp_catalog_ctrl_hpd_disable(dp->catalog);
>
> dp_display->internal_hpd = false;
> +
> + pm_runtime_mark_last_busy(&dp->pdev->dev);
> + pm_runtime_put_autosuspend(&dp->pdev->dev);
> mutex_unlock(&dp->event_mutex);
> }
>
> @@ -1732,13 +1790,11 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> if (dp_display->internal_hpd)
> return;
>
> - if (!dp->core_initialized) {
> - drm_dbg_dp(dp->drm_dev, "not initialized\n");
> - return;
> - }
> -
> - if (!dp_display->link_ready && status == connector_status_connected)
> + if (!dp_display->link_ready && status == connector_status_connected) {
> + dp_add_event(dp, EV_POWER_PM_GET, 0, 0);
Why? What for?
> dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> - else if (dp_display->link_ready && status == connector_status_disconnected)
> + } else if (dp_display->link_ready && status == connector_status_disconnected) {
> dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> + dp_add_event(dp, EV_POWER_PM_PUT, 0, 0);
> + }
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> index 5cb84ca..ed2f62a 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.c
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -152,8 +152,6 @@ int dp_power_client_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_enable(power->dev);
> -
> return dp_power_clk_init(power);
> }
>
> @@ -162,8 +160,6 @@ void dp_power_client_deinit(struct dp_power *dp_power)
> struct dp_power_private *power;
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
> -
> - pm_runtime_disable(power->dev);
> }
>
> int dp_power_init(struct dp_power *dp_power)
> @@ -173,11 +169,7 @@ int dp_power_init(struct dp_power *dp_power)
>
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> - pm_runtime_get_sync(power->dev);
> -
> rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
> - if (rc)
> - pm_runtime_put_sync(power->dev);
>
> return rc;
> }
> @@ -189,7 +181,6 @@ int dp_power_deinit(struct dp_power *dp_power)
> power = container_of(dp_power, struct dp_power_private, dp_power);
>
> dp_power_clk_enable(dp_power, DP_CORE_PM, false);
> - pm_runtime_put_sync(power->dev);
> return 0;
> }
>
> --
> 2.7.4
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list