[PATCH v5 08/12] drm/msm/dpu: split dpu_plane_atomic_check()
Abhinav Kumar
quic_abhinavk at quicinc.com
Wed Aug 28 19:29:01 UTC 2024
On 8/28/2024 11:59 AM, Dmitry Baryshkov wrote:
> On Wed, 28 Aug 2024 at 21:27, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>>
>>
>>
>> On 6/26/2024 2:46 PM, Dmitry Baryshkov wrote:
>>> Split dpu_plane_atomic_check() function into two pieces:
>>>
>>> dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
>>> without touching the associated pipe,
>>>
>>> and
>>>
>>> dpu_plane_atomic_check_pipes(), which takes into account used pipes.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 178 +++++++++++++++++++-----------
>>> 1 file changed, 112 insertions(+), 66 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> index 115c1bd77bdd..9b9fe28052ad 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> @@ -788,49 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
>>> #define MAX_UPSCALE_RATIO 20
>>> #define MAX_DOWNSCALE_RATIO 4
>>>
>>> -static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> - struct drm_atomic_state *state)
>>> +static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
>>> + struct drm_plane_state *new_plane_state,
>>> + const struct drm_crtc_state *crtc_state)
>>> {
>>> - struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
>>> - plane);
>>> int ret = 0, min_scale, max_scale;
>>> struct dpu_plane *pdpu = to_dpu_plane(plane);
>>> struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
>>> u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
>>> struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
>>> - struct dpu_sw_pipe *pipe = &pstate->pipe;
>>> - struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
>>> - const struct drm_crtc_state *crtc_state = NULL;
>>> - const struct msm_format *fmt;
>>> struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
>>> struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
>>> struct drm_rect fb_rect = { 0 };
>>> uint32_t max_linewidth;
>>> - unsigned int rotation;
>>> - uint32_t supported_rotations;
>>> - const struct dpu_sspp_cfg *pipe_hw_caps;
>>> - const struct dpu_sspp_sub_blks *sblk;
>>> -
>>> - if (new_plane_state->crtc)
>>> - crtc_state = drm_atomic_get_new_crtc_state(state,
>>> - new_plane_state->crtc);
>>> -
>>> - pipe->sspp = dpu_rm_get_sspp(&kms->rm, pdpu->pipe);
>>> - r_pipe->sspp = NULL;
>>>
>>> - if (!pipe->sspp)
>>> - return -EINVAL;
>>> -
>>> - pipe_hw_caps = pipe->sspp->cap;
>>> - sblk = pipe->sspp->cap->sblk;
>>> -
>>> - if (sblk->scaler_blk.len) {
>>> - min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
>>> - max_scale = MAX_DOWNSCALE_RATIO << 16;
>>> - } else {
>>> - min_scale = DRM_PLANE_NO_SCALING;
>>> - max_scale = DRM_PLANE_NO_SCALING;
>>> - }
>>> + min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
>>> + max_scale = MAX_DOWNSCALE_RATIO << 16;
>>>
>>> ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
>>> min_scale,
>>> @@ -843,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> if (!new_plane_state->visible)
>>> return 0;
>>>
>>> - pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> - pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> - r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> -
>>> pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
>>> if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
>>> DPU_ERROR("> %d plane stages assigned\n",
>>> @@ -871,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> return -E2BIG;
>>> }
>>>
>>> - fmt = msm_framebuffer_format(new_plane_state->fb);
>>> -
>>> max_linewidth = pdpu->catalog->caps->max_linewidth;
>>>
>>> drm_rect_rotate(&pipe_cfg->src_rect,
>>> @@ -881,6 +847,78 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>>
>>> if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
>>> _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
>>> + if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
>>> + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
>>> + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
>>> + return -E2BIG;
>>> + }
>>> +
>>> + *r_pipe_cfg = *pipe_cfg;
>>> + pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
>>> + pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
>>> + r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
>>> + r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
>>> + } else {
>>> + memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
>>> + }
>>> +
>>
>> This is the part I am not able to fully understand. Assignment of
>> r_pipe_cfg is also pipe related so why should that move to
>> dpu_plane_atomic_check_nopipe(). It should be part of
>> dpu_plane_atomic_check_pipe().
>
> Because it happens before possible pipe / rectangle allocation. These
> values are further used to assign resources.
>
Are you referring to SSPP allocation which happens in
dpu_plane_virtual_assign_resources() later on?
I see your point, but thats why originally I wanted to ask whether this
should be called dpu_plane_atomic_check_nosspp() and
dpu_plane_atomic_check_sspp() because pipe is kind of assigned either
here or already assigned. Its the SSPP which is not.
>>
>>> + drm_rect_rotate_inv(&pipe_cfg->src_rect,
>>> + new_plane_state->fb->width, new_plane_state->fb->height,
>>> + new_plane_state->rotation);
>>> + if (r_pipe_cfg->src_rect.x1 != 0)
>>> + drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
>>> + new_plane_state->fb->width, new_plane_state->fb->height,
>>> + new_plane_state->rotation);
>>> +
>>> + pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
>>> + struct drm_atomic_state *state,
>>> + const struct drm_crtc_state *crtc_state)
>>> +{
>>> + struct drm_plane_state *new_plane_state =
>>> + drm_atomic_get_new_plane_state(state, plane);
>>> + struct dpu_plane *pdpu = to_dpu_plane(plane);
>>> + struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
>>> + struct dpu_sw_pipe *pipe = &pstate->pipe;
>>> + struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
>>> + const struct msm_format *fmt;
>>> + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
>>> + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
>>> + uint32_t max_linewidth;
>>> + unsigned int rotation;
>>> + uint32_t supported_rotations;
>>> + const struct dpu_sspp_cfg *pipe_hw_caps;
>>> + const struct dpu_sspp_sub_blks *sblk;
>>> + int ret = 0;
>>> +
>>> + pipe_hw_caps = pipe->sspp->cap;
>>> + sblk = pipe->sspp->cap->sblk;
>>> +
>>> + /*
>>> + * We already have verified scaling against platform limitations.
>>> + * Now check if the SSPP supports scaling at all.
>>> + */
>>> + if (!sblk->scaler_blk.len &&
>>> + ((drm_rect_width(&new_plane_state->src) >> 16 !=
>>> + drm_rect_width(&new_plane_state->dst)) ||
>>> + (drm_rect_height(&new_plane_state->src) >> 16 !=
>>> + drm_rect_height(&new_plane_state->dst))))
>>> + return -ERANGE;
>>> +
>>
>> Should this part be retained under dpu_plane_atomic_check_nopipe()?
>>
>> This is also not pipe dependent.
>
> No, it uses sblk->scaler_blk, so it depends on the actual SSPP being
> used for this pipe.
>
Ack.
>>
>>> + fmt = msm_framebuffer_format(new_plane_state->fb);
>>> +
>>> + max_linewidth = pdpu->catalog->caps->max_linewidth;
>>> +
>>> + ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
>>> + &crtc_state->adjusted_mode);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
>>> /*
>>> * In parallel multirect case only the half of the usual width
>>> * is supported for tiled formats. If we are here, we know that
>>> @@ -894,12 +932,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> return -E2BIG;
>>> }
>>>
>>> - if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
>>> - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
>>> - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
>>> - return -E2BIG;
>>> - }
>>> -
>>> if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
>>> drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
>>> (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
>>> @@ -921,26 +953,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> r_pipe->multirect_index = DPU_SSPP_RECT_1;
>>> r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
>>>
>>> - *r_pipe_cfg = *pipe_cfg;
>>> - pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
>>> - pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
>>> - r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
>>> - r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
>>> - }
>>> -
>>> - drm_rect_rotate_inv(&pipe_cfg->src_rect,
>>> - new_plane_state->fb->width, new_plane_state->fb->height,
>>> - new_plane_state->rotation);
>>> - if (r_pipe->sspp)
>>> - drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
>>> - new_plane_state->fb->width, new_plane_state->fb->height,
>>> - new_plane_state->rotation);
>>> -
>>> - ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
>>> - if (ret)
>>> - return ret;
>>> -
>>> - if (r_pipe->sspp) {
>>> ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
>>> &crtc_state->adjusted_mode);
>>> if (ret)
>>> @@ -963,11 +975,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> }
>>>
>>> pstate->rotation = rotation;
>>
>> The dpu_plane_check_inline_rotation() is also pipe independent. So even
>> that goes to dpu_plane_atomic_check_nopipe()?
>
> It also depends on the sblk if I remember correctly. Also note that
> the next patch moves it to check_pipe().
>
Ack. I checked the next change. this part is fine.
>>
>>> - pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>>>
>>> return 0;
>>> }
>>>
>>
>> <snip>
>>
>
>
More information about the Freedreno
mailing list