[PATCH 14/21] drm/msm/dpu: Support quad-pipe in SSPP checking
Jun Nie
jun.nie at linaro.org
Thu Aug 29 10:17:43 UTC 2024
Support quad-pipe in SSPP checking with unified method
Signed-off-by: Jun Nie <jun.nie at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 108 ++++++++++++++----------------
1 file changed, 51 insertions(+), 57 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 4df7cfed4d230..78bf8f0292f62 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -738,12 +738,40 @@ static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu,
static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
struct dpu_sw_pipe *pipe,
struct dpu_sw_pipe_cfg *pipe_cfg,
- const struct msm_format *fmt,
- const struct drm_display_mode *mode)
+ const struct drm_display_mode *mode,
+ struct drm_plane_state *new_plane_state)
{
uint32_t min_src_size;
struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
int ret;
+ const struct msm_format *fmt;
+ uint32_t supported_rotations;
+ const struct dpu_sspp_cfg *pipe_hw_caps;
+ const struct dpu_sspp_sub_blks *sblk;
+
+ pipe_hw_caps = pipe->sspp->cap;
+ sblk = pipe->sspp->cap->sblk;
+
+ /*
+ * We already have verified scaling against platform limitations.
+ * Now check if the SSPP supports scaling at all.
+ */
+ if (!sblk->scaler_blk.len &&
+ ((drm_rect_width(&new_plane_state->src) >> 16 !=
+ drm_rect_width(&new_plane_state->dst)) ||
+ (drm_rect_height(&new_plane_state->src) >> 16 !=
+ drm_rect_height(&new_plane_state->dst))))
+ return -ERANGE;
+
+ fmt = msm_framebuffer_format(new_plane_state->fb);
+
+ supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
+
+ if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
+ supported_rotations |= DRM_MODE_ROTATE_90;
+
+ pipe_cfg->rotation = drm_rotation_simplify(new_plane_state->rotation,
+ supported_rotations);
min_src_size = MSM_FORMAT_IS_YUV(fmt) ? 2 : 1;
@@ -886,8 +914,7 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
return 0;
}
-static int dpu_plane_is_multirect_parallel_capable(struct dpu_sw_pipe *pipe,
- struct dpu_sw_pipe_cfg *pipe_cfg,
+static int dpu_plane_is_multirect_parallel_capable(struct dpu_sw_pipe_cfg *pipe_cfg,
const struct msm_format *fmt,
uint32_t max_linewidth)
{
@@ -916,49 +943,19 @@ static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
drm_atomic_get_new_plane_state(state, plane);
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
- struct dpu_sw_pipe *pipe = &pstate->pipe;
- struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
- const struct msm_format *fmt;
- struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
- struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
- uint32_t supported_rotations;
- const struct dpu_sspp_cfg *pipe_hw_caps;
- const struct dpu_sspp_sub_blks *sblk;
- int ret = 0;
-
- pipe_hw_caps = pipe->sspp->cap;
- sblk = pipe->sspp->cap->sblk;
-
- /*
- * We already have verified scaling against platform limitations.
- * Now check if the SSPP supports scaling at all.
- */
- if (!sblk->scaler_blk.len &&
- ((drm_rect_width(&new_plane_state->src) >> 16 !=
- drm_rect_width(&new_plane_state->dst)) ||
- (drm_rect_height(&new_plane_state->src) >> 16 !=
- drm_rect_height(&new_plane_state->dst))))
- return -ERANGE;
-
- fmt = msm_framebuffer_format(new_plane_state->fb);
-
- supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
-
- if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
- supported_rotations |= DRM_MODE_ROTATE_90;
-
- pipe_cfg->rotation = drm_rotation_simplify(new_plane_state->rotation,
- supported_rotations);
- r_pipe_cfg->rotation = pipe_cfg->rotation;
-
- ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
- &crtc_state->adjusted_mode);
- if (ret)
- return ret;
+ struct dpu_sw_pipe *pipe;
+ struct dpu_sw_pipe_cfg *pipe_cfg;
+ int ret = 0, i;
- if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
- ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
- &crtc_state->adjusted_mode);
+ for (i = 0; i < PIPES_PER_STAGE; i++) {
+ pipe = &pstate->pipe[i];
+ pipe_cfg = &pstate->pipe_cfg[i];
+ if (!pipe_cfg->visible || !pipe->sspp)
+ break;
+ DPU_DEBUG_PLANE(pdpu, "pipe %d is in use, validate it\n", i);
+ ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg,
+ &crtc_state->adjusted_mode,
+ new_plane_state);
if (ret)
return ret;
}
@@ -975,10 +972,10 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
- struct dpu_sw_pipe *pipe = &pstate->pipe;
- struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
- struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
- struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
+ struct dpu_sw_pipe *pipe = &pstate->pipe[0];
+ struct dpu_sw_pipe *r_pipe = &pstate->pipe[1];
+ struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg[0];
+ struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[1];
const struct drm_crtc_state *crtc_state = NULL;
if (new_plane_state->crtc)
@@ -1033,13 +1030,10 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
return -E2BIG;
}
- /*
- * Use multirect for wide plane. We do not support dynamic
- * assignment of SSPPs, so we know the configuration.
- */
pipe->multirect_index = DPU_SSPP_RECT_0;
pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+ r_pipe->sspp = pipe->sspp;
r_pipe->multirect_index = DPU_SSPP_RECT_1;
r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
}
@@ -1056,7 +1050,7 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane,
drm_atomic_get_old_plane_state(state, plane);
struct dpu_plane_state *pstate = to_dpu_plane_state(plane_state);
struct drm_crtc_state *crtc_state;
- int ret;
+ int ret, i;
if (plane_state->crtc)
crtc_state = drm_atomic_get_new_crtc_state(state,
@@ -1071,8 +1065,8 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane,
* resources are freed by dpu_crtc_assign_plane_resources(),
* but clean them here.
*/
- pstate->pipe.sspp = NULL;
- pstate->r_pipe.sspp = NULL;
+ for (i = 0; i < PIPES_PER_STAGE; i++)
+ pstate->pipe[i].sspp = NULL;
return 0;
}
--
2.34.1
More information about the Freedreno
mailing list