[PATCH 4/5] arm64: dts: qcom: sm8650: add GPU nodes

[Konrad Dybcio]

On 12.02.2024 11:37, Neil Armstrong wrote:
> Add GPU nodes for the SM8650 platform.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8650.dtsi | 169 +++++++++++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index c455ca4e6475..f6f9e603fb2f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -2582,6 +2582,131 @@ tcsr: clock-controller at 1fc0000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		gpu: gpu at 3d00000 {
> +			compatible = "qcom,adreno-43051401", "qcom,adreno";
> +			reg = <0x0 0x03d00000 0x0 0x40000>,
> +			      <0x0 0x03d9e000 0x0 0x1000>,
> +			      <0x0 0x03d61000 0x0 0x800>;
> +			reg-names = "kgsl_3d0_reg_memory",
> +				    "cx_mem",
> +				    "cx_dbgc";
> +
> +			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			iommus = <&adreno_smmu 0 0x0>,
> +				 <&adreno_smmu 1 0x0>;
> +
> +			operating-points-v2 = <&gpu_opp_table>;
> +
> +			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "gfx-mem";

ICC should be unnecessary

Konrad