[PATCH v2 16/19] drm/msm/dpu: modify encoder programming for CDM over DP
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Feb 13 21:16:26 UTC 2024
On Tue, 13 Feb 2024 at 23:10, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 2/13/2024 11:31 AM, Dmitry Baryshkov wrote:
> > On Tue, 13 Feb 2024 at 20:46, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>
> >>
> >>
> >> On 2/13/2024 10:23 AM, Dmitry Baryshkov wrote:
> >>> On Tue, 13 Feb 2024 at 19:32, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>> On 2/13/2024 3:18 AM, Dmitry Baryshkov wrote:
> >>>>> On Sat, 10 Feb 2024 at 03:53, Paloma Arellano <quic_parellan at quicinc.com> wrote:
> >>>>>>
> >>>>>> Adjust the encoder format programming in the case of video mode for DP
> >>>>>> to accommodate CDM related changes.
> >>>>>>
> >>>>>> Changes in v2:
> >>>>>> - Move timing engine programming to a separate patch from this
> >>>>>> one
> >>>>>> - Move update_pending_flush_periph() invocation completely to
> >>>>>> this patch
> >>>>>> - Change the logic of dpu_encoder_get_drm_fmt() so that it only
> >>>>>> calls drm_mode_is_420_only() instead of doing additional
> >>>>>> unnecessary checks
> >>>>>> - Create new functions msm_dp_needs_periph_flush() and it's
> >>>>>> supporting function dpu_encoder_needs_periph_flush() to check
> >>>>>> if the mode is YUV420 and VSC SDP is enabled before doing a
> >>>>>> peripheral flush
> >>>>>>
> >>>>>> Signed-off-by: Paloma Arellano <quic_parellan at quicinc.com>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 35 +++++++++++++++++++
> >>>>>> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 13 +++++++
> >>>>>> .../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 19 ++++++++++
> >>>>>> drivers/gpu/drm/msm/dp/dp_display.c | 18 ++++++++++
> >>>>>> drivers/gpu/drm/msm/msm_drv.h | 17 ++++++++-
> >>>>>> 5 files changed, 101 insertions(+), 1 deletion(-)
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >>>>>> index 7e7796561009a..6280c6be6dca9 100644
> >>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >>>>>> @@ -222,6 +222,41 @@ static u32 dither_matrix[DITHER_MATRIX_SZ] = {
> >>>>>> 15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
> >>>>>> };
> >>>>>>
> >>>>>> +u32 dpu_encoder_get_drm_fmt(struct dpu_encoder_phys *phys_enc)
> >>>>>> +{
> >>>>>> + struct drm_encoder *drm_enc;
> >>>>>> + struct dpu_encoder_virt *dpu_enc;
> >>>>>> + struct drm_display_info *info;
> >>>>>> + struct drm_display_mode *mode;
> >>>>>> +
> >>>>>> + drm_enc = phys_enc->parent;
> >>>>>> + dpu_enc = to_dpu_encoder_virt(drm_enc);
> >>>>>> + info = &dpu_enc->connector->display_info;
> >>>>>> + mode = &phys_enc->cached_mode;
> >>>>>> +
> >>>>>> + if (drm_mode_is_420_only(info, mode))
> >>>>>> + return DRM_FORMAT_YUV420;
> >>>>>> +
> >>>>>> + return DRM_FORMAT_RGB888;
> >>>>>> +}
> >>>>>> +
> >>>>>> +bool dpu_encoder_needs_periph_flush(struct dpu_encoder_phys *phys_enc)
> >>>>>> +{
> >>>>>> + struct drm_encoder *drm_enc;
> >>>>>> + struct dpu_encoder_virt *dpu_enc;
> >>>>>> + struct msm_display_info *disp_info;
> >>>>>> + struct msm_drm_private *priv;
> >>>>>> + struct drm_display_mode *mode;
> >>>>>> +
> >>>>>> + drm_enc = phys_enc->parent;
> >>>>>> + dpu_enc = to_dpu_encoder_virt(drm_enc);
> >>>>>> + disp_info = &dpu_enc->disp_info;
> >>>>>> + priv = drm_enc->dev->dev_private;
> >>>>>> + mode = &phys_enc->cached_mode;
> >>>>>> +
> >>>>>> + return phys_enc->hw_intf->cap->type == INTF_DP && phys_enc->hw_cdm &&
> >>>>>
> >>>>> Do we really need to check for phys_enc->hw_cdm here?
> >>>>>
> >>>>
> >>>> hmmm I dont think so. If CDM was not there, then after the last patch,
> >>>> YUV420 removes will not be present at all.
> >>>>
> >>>> The only other case I could think of was, if for some reason CDM was
> >>>> used by some other interface such as WB, then hw_cdm will not be assigned.
> >>>>
> >>>> But, I think even for that msm_dp_needs_periph_flush() will take care of
> >>>> it because we use the cached_mode which is assigned only in mode_set().
> >>>>
> >>>>>> + msm_dp_needs_periph_flush(priv->dp[disp_info->h_tile_instance[0]], mode);
> >>>>>> +}
> >>>>>>
> >>>>>> bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc)
> >>>>>> {
> >>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >>>>>> index f43d57d9c74e1..211a3d90eb690 100644
> >>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >>>>>> @@ -341,6 +341,19 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
> >>>>>> */
> >>>>>> unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc);
> >>>>>>
> >>>>>> +/**
> >>>>>> + * dpu_encoder_get_drm_fmt - return DRM fourcc format
> >>>>>> + * @phys_enc: Pointer to physical encoder structure
> >>>>>> + */
> >>>>>> +u32 dpu_encoder_get_drm_fmt(struct dpu_encoder_phys *phys_enc);
> >>>>>> +
> >>>>>> +/**
> >>>>>> + * dpu_encoder_needs_periph_flush - return true if physical encoder requires
> >>>>>> + * peripheral flush
> >>>>>> + * @phys_enc: Pointer to physical encoder structure
> >>>>>> + */
> >>>>>> +bool dpu_encoder_needs_periph_flush(struct dpu_encoder_phys *phys_enc);
> >>>>>> +
> >>>>>> /**
> >>>>>> * dpu_encoder_helper_split_config - split display configuration helper function
> >>>>>> * This helper function may be used by physical encoders to configure
> >>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> >>>>>> index f562beb6f7971..3f102b2813ca8 100644
> >>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> >>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> >>>>>> @@ -413,8 +413,15 @@ static int dpu_encoder_phys_vid_control_vblank_irq(
> >>>>>> static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
> >>>>>> {
> >>>>>> struct dpu_hw_ctl *ctl;
> >>>>>> + struct dpu_hw_cdm *hw_cdm;
> >>>>>> + const struct dpu_format *fmt = NULL;
> >>>>>> + u32 fmt_fourcc = DRM_FORMAT_RGB888;
> >>>>>>
> >>>>>> ctl = phys_enc->hw_ctl;
> >>>>>> + hw_cdm = phys_enc->hw_cdm;
> >>>>>> + if (hw_cdm)
> >>>>>> + fmt_fourcc = dpu_encoder_get_drm_fmt(phys_enc);
> >>>>>
> >>>>> Please move if(hw_cdm) inside dpu_encoder_get_drm_fmt().
> >>>>>
> >>>>
> >>>> I think we dont need to check for if (hw_cdm) at all.
> >>>> dpu_encoder_get_drm_fmt() was just supposed to be a helper which returns
> >>>> the fourcc code based on the mode. It doesnt need to know if there is
> >>>> cdm or not.
> >>>>
> >>>> We cannot move it inside dpu_encoder_helper_phys_setup_cdm() because for
> >>>> WB, we do not change the fourcc based on the mode. Its specific to video
> >>>> mode.
> >>>
> >>> Wait... In the case of the WB we use the fourcc + modifier from the
> >>> framebuffer. Ok, this looks fine then.
> >>>
> >>>
> >>>>
> >>>>>> + fmt = dpu_get_dpu_format(fmt_fourcc);
> >>>>>
> >>>>> Can this be moved into dpu_encoder_helper_phys_setup_cdm() ? Or maybe
> >>>>> we can move both calls into the helper? I mean, fmt_fourcc is not used
> >>>>> at all if the CDM is not used.
> >>>>>
> >>>>
> >>>> fourcc is always used to get the fmt to setup the timing engine params.
> >>>> Its just that it was always hard-coded to RGB. With CDM, it can change
> >>>> based on the mode. Thats why this utility was introduced to return the
> >>>> fourcc from the mode information.
> >>>
> >>> Yes, I perfectly understand that. I just disliked the idea of calling
> >>> dpu_get_dpu_format() if the result gets unused.
> >>> What about passing fourcc + modifier to
> >>> dpu_encoder_helper_phys_setup_cdm() instead?
> >>>
> >>
> >> Why would it be unused? Its returning YUV420 if the mode is YUV420 and
> >> RGB otherwise.
> >
> > I thought about it being unused if there is no CDM in play.
> >
> >>
> >> We need fourcc + modifier for video mode timing engine setup. I didnt
> >> quite follow your suggestion of passing these to
> >> dpu_encoder_helper_phys_setup_cdm().
> >
> > Ah, this is modified in the next patch...
> >
> > Maybe passing fmt_fourcc from this function to setup_timing_engine
> > will solve my troubles.
> >
>
> Sorry but isnt that what the next patch is doing?
I thought about passing it from dpu_encoder_phys_vid_enable(). Unless
I miss something.
>
> dpu_encoder_phys_vid_setup_timing_engine() gets the fourcc from
> dpu_encoder_get_drm_fmt() now.
>
> There should be no link between setup_cdm() and setup_timing_engine().
>
> What we have right now makes looks fine.
>
> >>
> >>
> >>>>
> >>>>>>
> >>>>>> DPU_DEBUG_VIDENC(phys_enc, "\n");
> >>>>>>
> >>>>>> @@ -423,6 +430,8 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
> >>>>>>
> >>>>>> dpu_encoder_helper_split_config(phys_enc, phys_enc->hw_intf->idx);
> >>>>>>
> >>>>>> + dpu_encoder_helper_phys_setup_cdm(phys_enc, fmt, CDM_CDWN_OUTPUT_HDMI);
> >>>>>> +
> >>>>>> dpu_encoder_phys_vid_setup_timing_engine(phys_enc);
> >>>>>>
> >>>>>> /*
> >>>>>> @@ -438,6 +447,16 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
> >>>>>> if (ctl->ops.update_pending_flush_merge_3d && phys_enc->hw_pp->merge_3d)
> >>>>>> ctl->ops.update_pending_flush_merge_3d(ctl, phys_enc->hw_pp->merge_3d->idx);
> >>>>>>
> >>>>>> + if (ctl->ops.update_pending_flush_cdm && phys_enc->hw_cdm)
> >>>>>> + ctl->ops.update_pending_flush_cdm(ctl, hw_cdm->idx);
> >>>>>> +
> >>>>>> + /*
> >>>>>> + * Peripheral flush must be updated whenever flushing SDP packets is needed.
> >>>>>> + * SDP packets are required for any YUV format (YUV420, YUV422, YUV444).
> >>>>>> + */
> >>>>>> + if (ctl->ops.update_pending_flush_periph && dpu_encoder_needs_periph_flush(phys_enc))
> >>>>>> + ctl->ops.update_pending_flush_periph(ctl, phys_enc->hw_intf->idx);
> >>>>>> +
> >>>>>> skip_flush:
> >>>>>> DPU_DEBUG_VIDENC(phys_enc,
> >>>>>> "update pending flush ctl %d intf %d\n",
> >>>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>>>> index 4b04388719363..ebcc76ef1d590 100644
> >>>>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >>>>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>>>> @@ -1397,6 +1397,24 @@ void __exit msm_dp_unregister(void)
> >>>>>> platform_driver_unregister(&dp_display_driver);
> >>>>>> }
> >>>>>>
> >>>>>> +bool msm_dp_is_yuv_420_enabled(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode)
> >>>>>> +{
> >>>>>> + struct dp_display_private *dp;
> >>>>>> + const struct drm_display_info *info;
> >>>>>> +
> >>>>>> + dp = container_of(dp_display, struct dp_display_private, dp_display);
> >>>>>> + info = &dp_display->connector->display_info;
> >>>>>> +
> >>>>>> + return dp->panel->vsc_sdp_supported && drm_mode_is_420_only(info, mode);
> >>>>>> +}
> >>>>>> +
> >>>>>> +bool msm_dp_needs_periph_flush(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode)
> >>>>>> +{
> >>>>>> + return msm_dp_is_yuv_420_enabled(dp_display, mode);
> >>>>>> +}
> >>>>>> +
> >>>>>> bool msm_dp_wide_bus_available(const struct msm_dp *dp_display)
> >>>>>> {
> >>>>>> struct dp_display_private *dp;
> >>>>>> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> >>>>>> index 16a7cbc0b7dd8..b876ebd48effe 100644
> >>>>>> --- a/drivers/gpu/drm/msm/msm_drv.h
> >>>>>> +++ b/drivers/gpu/drm/msm/msm_drv.h
> >>>>>> @@ -387,7 +387,10 @@ void __exit msm_dp_unregister(void);
> >>>>>> int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> >>>>>> struct drm_encoder *encoder);
> >>>>>> void msm_dp_snapshot(struct msm_disp_state *disp_state, struct msm_dp *dp_display);
> >>>>>> -
> >>>>>> +bool msm_dp_is_yuv_420_enabled(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode);
> >>>>>> +bool msm_dp_needs_periph_flush(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode);
> >>>>>> bool msm_dp_wide_bus_available(const struct msm_dp *dp_display);
> >>>>>>
> >>>>>> #else
> >>>>>> @@ -409,6 +412,18 @@ static inline void msm_dp_snapshot(struct msm_disp_state *disp_state, struct msm
> >>>>>> {
> >>>>>> }
> >>>>>>
> >>>>>> +static inline bool msm_dp_is_yuv_420_enabled(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode)
> >>>>>> +{
> >>>>>> + return false;
> >>>>>> +}
> >>>>>> +
> >>>>>> +static inline bool msm_dp_needs_periph_flush(const struct msm_dp *dp_display,
> >>>>>> + const struct drm_display_mode *mode)
> >>>>>> +{
> >>>>>> + return false;
> >>>>>> +}
> >>>>>> +
> >>>>>> static inline bool msm_dp_wide_bus_available(const struct msm_dp *dp_display)
> >>>>>> {
> >>>>>> return false;
> >>>>>> --
> >>>>>> 2.39.2
> >>>>>>
> >>>>>
> >>>>>
> >>>
> >>>
> >>>
> >
> >
> >
--
With best wishes
Dmitry
More information about the Freedreno
mailing list