[PATCH v4 06/13] drm/msm/dpu: split dpu_plane_atomic_check()
Abhinav Kumar
quic_abhinavk at quicinc.com
Wed Jun 5 23:47:35 UTC 2024
On 6/5/2024 4:32 PM, Dmitry Baryshkov wrote:
> On Thu, 6 Jun 2024 at 02:19, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>>
>>
>>
>> On 3/13/2024 5:02 PM, Dmitry Baryshkov wrote:
>>> Split dpu_plane_atomic_check() function into two pieces:
>>>
>>> dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
>>> without touching the associated pipe,
>>>
>>> and
>>>
>>> dpu_plane_atomic_check_pipes(), which takes into account used pipes.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 184 ++++++++++++++--------
>>> 1 file changed, 117 insertions(+), 67 deletions(-)
>>>
>>
>> One thing which seemed odd to me is even dpu_plane_atomic_check_nopipe()
>> does use pipe_cfg even though its named "nopipe".
>>
>> Perhaps were you targetting a split of SW planes vs SSPP atomic_check?
>>
>> I tried applying this patch on top of msm-next to more closely review
>> the split up but it does not apply. So, I will review this patch a
>> little better after it is re-spun. But will proceed with remaining patches.
>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> index 6360052523b5..187ac2767a2b 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>>> @@ -788,50 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
>>> #define MAX_UPSCALE_RATIO 20
>>> #define MAX_DOWNSCALE_RATIO 4
>>>
>>> -static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> - struct drm_atomic_state *state)
>>> +static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
>>> + struct drm_plane_state *new_plane_state,
>>> + const struct drm_crtc_state *crtc_state)
>>> {
>>> - struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
>>> - plane);
>>> int ret = 0, min_scale, max_scale;
>>> struct dpu_plane *pdpu = to_dpu_plane(plane);
>>> struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
>>> u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
>>> struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
>>> - struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
>>> - struct dpu_sw_pipe *pipe = &pstate->pipe;
>>> - struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
>>> - const struct drm_crtc_state *crtc_state = NULL;
>>> - const struct dpu_format *fmt;
>>> struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
>>> struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
>>> struct drm_rect fb_rect = { 0 };
>>> uint32_t max_linewidth;
>>> - unsigned int rotation;
>>> - uint32_t supported_rotations;
>>> - const struct dpu_sspp_cfg *pipe_hw_caps;
>>> - const struct dpu_sspp_sub_blks *sblk;
>>>
>>> - if (new_plane_state->crtc)
>>> - crtc_state = drm_atomic_get_new_crtc_state(state,
>>> - new_plane_state->crtc);
>>> -
>>> - pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
>>> - r_pipe->sspp = NULL;
>>> -
>>> - if (!pipe->sspp)
>>> - return -EINVAL;
>>> -
>>> - pipe_hw_caps = pipe->sspp->cap;
>>> - sblk = pipe->sspp->cap->sblk;
>>> -
>>> - if (sblk->scaler_blk.len) {
>>> - min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
>>> - max_scale = MAX_DOWNSCALE_RATIO << 16;
>>> - } else {
>>> - min_scale = 1 << 16;
>>> - max_scale = 1 << 16;
>>> - }
>>> + min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
>>> + max_scale = MAX_DOWNSCALE_RATIO << 16;
>>>
>>> ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
>>> min_scale,
>>> @@ -844,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> if (!new_plane_state->visible)
>>> return 0;
>>>
>>> - pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> - pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> - r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> -
>>> pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
>>> if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
>>> DPU_ERROR("> %d plane stages assigned\n",
>>> @@ -872,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> return -E2BIG;
>>> }
>>>
>>> - fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
>>> -
>>> max_linewidth = pdpu->catalog->caps->max_linewidth;
>>>
>>> drm_rect_rotate(&pipe_cfg->src_rect,
>>> @@ -882,6 +847,83 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>>
>>> if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
>>> _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
>>> + if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
>>> + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
>>> + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
>>> + return -E2BIG;
>>> + }
>>> +
>>> + *r_pipe_cfg = *pipe_cfg;
>>> + pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
>>> + pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
>>> + r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
>>> + r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
>>> + } else {
>>> + memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
>>> + }
>>> +
>>> + drm_rect_rotate_inv(&pipe_cfg->src_rect,
>>> + new_plane_state->fb->width, new_plane_state->fb->height,
>>> + new_plane_state->rotation);
>>> + if (r_pipe_cfg->src_rect.x1 != 0)
>>> + drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
>>> + new_plane_state->fb->width, new_plane_state->fb->height,
>>> + new_plane_state->rotation);
>>> +
>>> + pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
>>> + struct drm_atomic_state *state,
>>> + const struct drm_crtc_state *crtc_state)
>>> +{
>>> + struct drm_plane_state *new_plane_state =
>>> + drm_atomic_get_new_plane_state(state, plane);
>>> + struct dpu_plane *pdpu = to_dpu_plane(plane);
>>> + struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
>>> + struct dpu_sw_pipe *pipe = &pstate->pipe;
>>> + struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
>>> + const struct dpu_format *fmt;
>>> + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
>>> + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
>>> + uint32_t max_linewidth;
>>> + unsigned int rotation;
>>> + uint32_t supported_rotations;
>>> + const struct dpu_sspp_cfg *pipe_hw_caps;
>>> + const struct dpu_sspp_sub_blks *sblk;
>>> + int ret = 0;
>>> +
>>> + pipe_hw_caps = pipe->sspp->cap;
>>> + sblk = pipe->sspp->cap->sblk;
>>> +
>>> + /*
>>> + * We already have verified scaling against platform limitations.
>>> + * Now check if the SSPP supports scaling at all.
>>> + */
>>> + if (!sblk->scaler_blk.len &&
>>> + ((drm_rect_width(&new_plane_state->src) >> 16 !=
>>> + drm_rect_width(&new_plane_state->dst)) ||
>>> + (drm_rect_height(&new_plane_state->src) >> 16 !=
>>> + drm_rect_height(&new_plane_state->dst))))
>>> + return -ERANGE;
>>> +
>>> + pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
>>> + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
>>> +
>>> + fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
>>> +
>>> + max_linewidth = pdpu->catalog->caps->max_linewidth;
>>> +
>>> + ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
>>> + &crtc_state->adjusted_mode);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (r_pipe_cfg->src_rect.x1 != 0) {
>>> /*
>>> * In parallel multirect case only the half of the usual width
>>> * is supported for tiled formats. If we are here, we know that
>>> @@ -895,12 +937,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> return -E2BIG;
>>> }
>>>
>>> - if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
>>> - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
>>> - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
>>> - return -E2BIG;
>>> - }
>>> -
>>> if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
>>> drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
>>> (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
>>> @@ -922,26 +958,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> r_pipe->multirect_index = DPU_SSPP_RECT_1;
>>> r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
>>>
>>> - *r_pipe_cfg = *pipe_cfg;
>>> - pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
>>> - pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
>>> - r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
>>> - r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
>>> - }
>>> -
>>> - drm_rect_rotate_inv(&pipe_cfg->src_rect,
>>> - new_plane_state->fb->width, new_plane_state->fb->height,
>>> - new_plane_state->rotation);
>>> - if (r_pipe->sspp)
>>> - drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
>>> - new_plane_state->fb->width, new_plane_state->fb->height,
>>> - new_plane_state->rotation);
>>> -
>>> - ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
>>> - if (ret)
>>> - return ret;
>>> -
>>> - if (r_pipe->sspp) {
>>> ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
>>> &crtc_state->adjusted_mode);
>>> if (ret)
>>> @@ -964,11 +980,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> }
>>>
>>> pstate->rotation = rotation;
>>> - pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>>>
>>> return 0;
>>> }
>>>
>>> +static int dpu_plane_atomic_check(struct drm_plane *plane,
>>> + struct drm_atomic_state *state)
>>> +{
>>> + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
>>> + plane);
>>> + int ret = 0;
>>> + struct dpu_plane *pdpu = to_dpu_plane(plane);
>>> + struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
>>> + struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
>>> + struct dpu_sw_pipe *pipe = &pstate->pipe;
>>> + struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
>>> + const struct drm_crtc_state *crtc_state = NULL;
>>> +
>>> + if (new_plane_state->crtc)
>>> + crtc_state = drm_atomic_get_new_crtc_state(state,
>>> + new_plane_state->crtc);
>>> +
>>> + if (pdpu->pipe != SSPP_NONE) {
>>
>> This check was not present iirc, why did you have to add this?
>> RM will return the same SSPP unless freed. So why this additional check?
>
> If pdpu->pipe is not SSPP_NONE, then virtual planes are disabled and
> there is a fixed 1:1 relationship between planes and SSPP blocks.
>
True, pdpu->pipe is currently assigned in dpu_plane_init(), so we will
always be hitting this condition.
Perhaps the patches later on are changing that, so shouldnt this part
come along with those?
>>
>>> + pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
>>> + r_pipe->sspp = NULL;
>>> + }
>>> +
>>> + if (!pipe->sspp)
>>> + return -EINVAL;
>>> +
>>> + ret = dpu_plane_atomic_check_nopipe(plane, new_plane_state, crtc_state);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (!new_plane_state->visible)
>>> + return 0;
>>> +
>>> + return dpu_plane_atomic_check_pipes(plane, state, crtc_state);
>>> +}
>>> +
>>> static void dpu_plane_flush_csc(struct dpu_plane *pdpu, struct dpu_sw_pipe *pipe)
>>> {
>>> const struct dpu_format *format =
>
>
>
More information about the Freedreno
mailing list