[PATCH v2 1/3] drm/msm/mdss: define bitfields for the UBWC_STATIC register

[Abhinav Kumar]

On 11/22/2024 9:44 PM, Dmitry Baryshkov wrote:
> Rather than hand-coding UBWC_STATIC value calculation, define
> corresponding bitfields and use them to setup the register value.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   drivers/gpu/drm/msm/msm_mdss.c                 | 38 +++++++++++++++-----------
>   drivers/gpu/drm/msm/msm_mdss.h                 |  3 +-
>   drivers/gpu/drm/msm/registers/display/mdss.xml | 11 +++++++-
>   3 files changed, 34 insertions(+), 18 deletions(-)
> 

<snip>

>   
> diff --git a/drivers/gpu/drm/msm/registers/display/mdss.xml b/drivers/gpu/drm/msm/registers/display/mdss.xml
> index ac85caf1575c7908bcf68f0249da38dccf4f07b6..b6f93984928522a35a782cbad9de006eac225725 100644
> --- a/drivers/gpu/drm/msm/registers/display/mdss.xml
> +++ b/drivers/gpu/drm/msm/registers/display/mdss.xml
> @@ -21,7 +21,16 @@ xsi:schemaLocation="https://gitlab.freedesktop.org/freedreno/ rules-fd.xsd">
>   
>   	<reg32 offset="0x00058" name="UBWC_DEC_HW_VERSION"/>
>   
> -	<reg32 offset="0x00144" name="UBWC_STATIC"/>
> +	<reg32 offset="0x00144" name="UBWC_STATIC">
> +		<bitfield name="UBWC_SWIZZLE" low="0" high="2"/>
> +		<bitfield name="UBWC_BANK_SPREAD" pos="3"/>
> +		<!-- high=5 for UBWC < 4.0 -->
> +		<bitfield name="HIGHEST_BANK_BIT" low="4" high="6"/>
> +		<bitfield name="UBWC_MIN_ACC_LEN" pos="8"/>

MIN_ACC_LEN OR MALSIZE has 2 bits , bits 8 and 9.

But bit 9 is unused today. Hence we were using it as a 1 or 0 today.

Its unused on all the chipsets I checked. Do you want to continue using 
the same way or correct this?