[PATCH 5/5] arm64: dts: qcom: qcs8300: add display dt nodes for MDSS and DPU

[Yongxing Mou]

Add devicetree changes to enable MDSS display-subsystem and its
display-controller(DPU) for Qualcomm QCS8300 platform.

Signed-off-by: Yongxing Mou <quic_yongmou at quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 87 +++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 60f45d8b9d556a5909750fae286fc33dbf77b308..42a578e1f99017b8aafb1e967b8675210957812e 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -926,6 +926,93 @@ camcc: clock-controller at ade0000 {
 			#power-domain-cells = <1>;
 		};
 
+		mdss: display-subsystem at ae00000 {
+			compatible = "qcom,qcs8300-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller at ae01000 {
+				compatible = "qcom,qcs8300-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+		};
+
 		dispcc: clock-controller at af00000 {
 			compatible = "qcom,sa8775p-dispcc0";
 			reg = <0x0 0x0af00000 0x0 0x20000>;

-- 
2.34.1