[PATCH v2 14/14] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Oct 10 14:00:50 UTC 2024
On Wed, Oct 09, 2024 at 04:50:27PM GMT, Jun Nie wrote:
> Request 4 mixers and 4 DSC for the case that both dual-DSI and DSC are
> enabled. We prefer to use 4 pipes for dual DSI case for it is power optimal
> for DSC.
>
> Signed-off-by: Jun Nie <jun.nie at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 6 ++---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 29 ++++++++++++++++++------
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 3 ++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +-
> 6 files changed, 30 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index d2aca0a9493d5..dbdfff1c7792a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -200,7 +200,7 @@ static int dpu_crtc_get_lm_crc(struct drm_crtc *crtc,
> struct dpu_crtc_state *crtc_state)
> {
> struct dpu_crtc_mixer *m;
> - u32 crcs[CRTC_DUAL_MIXERS];
> + u32 crcs[CRTC_QUAD_MIXERS];
>
> int rc = 0;
> int i;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> index ee7cf71f89fc7..f8276afd99192 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> @@ -211,7 +211,7 @@ struct dpu_crtc_state {
>
> bool bw_control;
> bool bw_split_vote;
> - struct drm_rect lm_bounds[CRTC_DUAL_MIXERS];
> + struct drm_rect lm_bounds[CRTC_QUAD_MIXERS];
>
> uint64_t input_fence_timeout_ns;
>
> @@ -219,10 +219,10 @@ struct dpu_crtc_state {
>
> /* HW Resources reserved for the crtc */
> u32 num_mixers;
> - struct dpu_crtc_mixer mixers[CRTC_DUAL_MIXERS];
> + struct dpu_crtc_mixer mixers[CRTC_QUAD_MIXERS];
>
> u32 num_ctls;
> - struct dpu_hw_ctl *hw_ctls[CRTC_DUAL_MIXERS];
> + struct dpu_hw_ctl *hw_ctls[CRTC_QUAD_MIXERS];
>
> u32 num_dscs;
> enum dpu_crtc_crc_source crc_source;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 68655c8817bf8..ed220ac691e8a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -54,7 +54,7 @@
> #define MAX_PHYS_ENCODERS_PER_VIRTUAL \
> (MAX_H_TILES_PER_DISPLAY * NUM_PHYS_ENCODER_TYPES)
>
> -#define MAX_CHANNELS_PER_ENC 2
> +#define MAX_CHANNELS_PER_ENC 4
>
> #define IDLE_SHORT_TIMEOUT 1
>
> @@ -588,15 +588,19 @@ static struct msm_display_topology dpu_encoder_get_topology(
>
> /* Datapath topology selection
> *
> - * Dual display
> + * Dual display without DSC
> * 2 LM, 2 INTF ( Split display using 2 interfaces)
> *
> + * Dual display with DSC
> + * 4 LM, 2 INTF ( Split display using 2 interfaces)
> + *
> * Single display
> * 1 LM, 1 INTF
> * 2 LM, 1 INTF (stream merge to support high resolution interfaces)
> *
> * Add dspps to the reservation requirements if ctm is requested
> */
> +
> if (intf_count == 2)
> topology.num_lm = 2;
> else if (!dpu_kms->catalog->caps->has_3d_merge)
> @@ -615,10 +619,21 @@ static struct msm_display_topology dpu_encoder_get_topology(
> * 2 DSC encoders, 2 layer mixers and 1 interface
> * this is power optimal and can drive up to (including) 4k
> * screens
> + * But for dual display case, we prefer 4 layer mixers. Because
> + * the resolution is always high in the case and 4 DSCs are more
> + * power optimal. While a single SSPP can only co-work with one
> + * mixer pair. So 4 mixers are needed in this case.
What is the relationship between SSPP working with a mixer pair and
high-res using 4 mixers? You have been writing about DSC, then you
suddently mention SSPP.
> */
> - topology.num_dsc = 2;
> - topology.num_lm = 2;
> - topology.num_intf = 1;
> +
> + if (intf_count == 2) {
> + topology.num_dsc = 4;
> + topology.num_lm = 4;
> + topology.num_intf = 2;
> + } else {
> + topology.num_dsc = 2;
> + topology.num_lm = 2;
> + topology.num_intf = 1;
> + }
> }
>
> return topology;
> @@ -2031,8 +2046,8 @@ static void dpu_encoder_helper_reset_mixers(struct dpu_encoder_phys *phys_enc)
> struct dpu_hw_mixer_cfg mixer;
> int i, num_lm;
> struct dpu_global_state *global_state;
> - struct dpu_hw_blk *hw_lm[2];
> - struct dpu_hw_mixer *hw_mixer[2];
> + struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
> + struct dpu_hw_mixer *hw_mixer[MAX_CHANNELS_PER_ENC];
> struct dpu_hw_ctl *ctl = phys_enc->hw_ctl;
>
> memset(&mixer, 0, sizeof(mixer));
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e77ebe3a68da9..c877ee45535ac 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -324,7 +324,8 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>
> /* Use merge_3d unless DSC MERGE topology is used */
> if (phys_enc->split_role == ENC_ROLE_SOLO &&
> - dpu_cstate->num_mixers == CRTC_DUAL_MIXERS &&
> + (dpu_cstate->num_mixers == CRTC_DUAL_MIXERS ||
> + dpu_cstate->num_mixers == CRTC_QUAD_MIXERS) &&
> !dpu_encoder_use_dsc_merge(phys_enc->parent))
> return BLEND_3D_H_ROW_INT;
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index bf86d643887dd..f79ecd409a830 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -25,6 +25,7 @@
> #define MAX_IMG_HEIGHT 0x3fff
>
> #define CRTC_DUAL_MIXERS 2
> +#define CRTC_QUAD_MIXERS 4
>
> #define MAX_XIN_COUNT 16
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d8f5cffa60ea6..671e03406df74 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -32,9 +32,9 @@
> #define DPU_MAX_PLANES 4
> #endif
>
> -#define PIPES_PER_PLANE 2
> #define PIPES_PER_LM_PAIR 2
> #define LM_PAIRS_PER_PLANE 2
> +#define PIPES_PER_PLANE (PIPES_PER_LM_PAIR * LM_PAIRS_PER_PLANE)
> #ifndef DPU_MAX_DE_CURVES
> #define DPU_MAX_DE_CURVES 3
> #endif
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list