[PATCH v2 12/14] drm/msm/dpu: support plane splitting in quad-pipe case
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Oct 11 08:31:57 UTC 2024
On Fri, 11 Oct 2024 at 11:13, Jun Nie <jun.nie at linaro.org> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov at linaro.org> 于2024年10月10日周四 21:29写道：
> >
> > On Wed, Oct 09, 2024 at 04:50:25PM GMT, Jun Nie wrote:
> > > Clip plane into pipes per left and right half screen ROI if topology
> > > is quad pipe.
> >
> > Why? Please provide an explanation for the reviewers not knowing the
> > details.
>
> The content of every half of screen is sent out via one interface in
> dual-DSI case. The content for every interface is blended by a LM
> pair, thus no content of any pipe shall cross the LM pair. We need
> to clip plane into pipes per left and right half screen ROI if topology
> is quad pipe.
=> commit message.
> >
> > > Then split the clipped rectangle by half if the rectangle
> > > width still exceeds width limit.
> > >
> > > Signed-off-by: Jun Nie <jun.nie at linaro.org>
> > > ---
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 7 +++
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 6 ++
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 99 ++++++++++++++++++++++---------
> > > 3 files changed, 84 insertions(+), 28 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > index 66f745399a602..d2aca0a9493d5 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > @@ -1310,6 +1310,13 @@ int dpu_crtc_vblank(struct drm_crtc *crtc, bool en)
> > > return 0;
> > > }
> > >
> > > +unsigned int dpu_crtc_get_lm_num(const struct drm_crtc_state *state)
> >
> > I think the DPU driver uses num_foo rather than foo_num
>
> dpu_crtc_get_num_lm()
> >
> > > +{
> > > + struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
> > > +
> > > + return cstate->num_mixers;
> > > +}
> > > +
> > > #ifdef CONFIG_DEBUG_FS
> > > static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
> > > {
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> > > index 5260e2440f059..ee7cf71f89fc7 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> > > @@ -304,4 +304,10 @@ static inline enum dpu_crtc_client_type dpu_crtc_get_client_type(
> > >
> > > void dpu_crtc_frame_event_cb(struct drm_crtc *crtc, u32 event);
> > >
> > > +/**
> > > + * dpu_crtc_get_lm_num - Get mixer number in this CRTC pipeline
> > > + * state: Pointer to drm crtc state object
> > > + */
> > > +unsigned int dpu_crtc_get_lm_num(const struct drm_crtc_state *state);
> > > +
> > > #endif /* _DPU_CRTC_H_ */
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > > index 898fc2937954e..480a1b46aba72 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > > @@ -837,10 +837,12 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
> > > struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
> > > u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
> > > struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> > > - struct dpu_sw_pipe_cfg *pipe_cfg;
> > > - struct dpu_sw_pipe_cfg *r_pipe_cfg;
> > > + struct dpu_sw_pipe_cfg pipe_cfg;
> > > struct drm_rect fb_rect = { 0 };
> > > + const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
> > > uint32_t max_linewidth;
> > > + u32 lm_num;
> > > + int lmcfg_id, lmcfg_num;
> > >
> > > min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> > > max_scale = MAX_DOWNSCALE_RATIO << 16;
> > > @@ -863,13 +865,10 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
> > > return -EINVAL;
> > > }
> > >
> > > - /* move the assignment here, to ease handling to another pairs later */
> > > - pipe_cfg = &pstate->pipe_cfg[0];
> > > - r_pipe_cfg = &pstate->pipe_cfg[1];
> > > - /* state->src is 16.16, src_rect is not */
> > > - drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
> > > + lm_num = dpu_crtc_get_lm_num(crtc_state);
> > >
> > > - pipe_cfg->dst_rect = new_plane_state->dst;
> > > + /* state->src is 16.16, src_rect is not */
> > > + drm_rect_fp_to_int(&pipe_cfg.src_rect, &new_plane_state->src);
> > >
> > > fb_rect.x2 = new_plane_state->fb->width;
> > > fb_rect.y2 = new_plane_state->fb->height;
> > > @@ -884,34 +883,78 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
> > >
> > > max_linewidth = pdpu->catalog->caps->max_linewidth;
> > >
> > > - drm_rect_rotate(&pipe_cfg->src_rect,
> > > + drm_rect_rotate(&pipe_cfg.src_rect,
> > > new_plane_state->fb->width, new_plane_state->fb->height,
> > > new_plane_state->rotation);
> > >
> > > - if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
> > > - _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
> > > - if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> > > - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> > > - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> > > - return -E2BIG;
> > > + /*
> > > + * We have 1 mixer pair cfg for 1:1:1 and 2:2:1 topology, 2 mixer pair
> > > + * configs for left and right half screen in case of 4:4:2 topology.
> > > + * But we may have 2 rect to split plane with 1 config for 2:2:1.
> > > + * So need to handle super wide plane splitting, and plane on right half
> > > + * for quad-pipe case. Check dest rectangle left/right clipping
> > > + * first, then check super wide rectangle splitting in every half next.
> > > + */
> > > + lmcfg_num = (lm_num + 1) / 2;
> >
> > num_stages?
>
> OK. Then lmcfg_id -> stage_id
> >
> > > + /* iterate mixer configs for this plane, to separate left/right with the id */
> > > + for (lmcfg_id = 0; lmcfg_id < lmcfg_num; lmcfg_id++) {
> > > + struct drm_rect mixer_rect = {lmcfg_id * mode->hdisplay / lmcfg_num, 0,
> > > + (lmcfg_id + 1) * mode->hdisplay / lmcfg_num, mode->vdisplay};
> > > + int cfg_idx = lmcfg_id * PIPES_PER_LM_PAIR;
> > > + struct dpu_sw_pipe_cfg *cur_pipecfg = &pstate->pipe_cfg[cfg_idx];
> > > +
> > > + drm_rect_fp_to_int(&cur_pipecfg->src_rect, &new_plane_state->src);
> > > + cur_pipecfg->dst_rect = new_plane_state->dst;
> > > +
> > > + DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT
> > > + " vs clip window " DRM_RECT_FMT "\n",
> > > + DRM_RECT_ARG(&cur_pipecfg->src_rect),
> > > + DRM_RECT_ARG(&mixer_rect));
> > > +
> > > + /* If this plane does not fall into mixer rect, check next mixer rect */
> > > + if (!drm_rect_clip_scaled(&cur_pipecfg->src_rect, &cur_pipecfg->dst_rect, &mixer_rect)) {
> > > + memset(&pstate->pipe_cfg[cfg_idx], 0, 2 * sizeof(struct dpu_sw_pipe_cfg));
> > > + memset(&pstate->pipe[cfg_idx], 0, 2 * sizeof(struct dpu_sw_pipe));
> > > + continue;
> > > }
> > >
> > > - *r_pipe_cfg = *pipe_cfg;
> > > - pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> > > - pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> > > - r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> > > - r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> > > - } else {
> > > - memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
> > > - }
> > > + cur_pipecfg->valid = true;
> >
> > ... and checks have been broken up to now. This isn't good.
>
> Will move this patch before the plane checking patch.
You might need to move related chunks as well.
> >
> > > + cur_pipecfg->dst_rect.x1 -= mixer_rect.x1;
> > > + cur_pipecfg->dst_rect.x2 -= mixer_rect.x1;
> > > +
> > > + DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
> > > + DRM_RECT_ARG(&cur_pipecfg->src_rect), DRM_RECT_ARG(&cur_pipecfg->dst_rect));
> > > +
> > > + /* Split super wide rect into 2 rect */
> > > + if ((drm_rect_width(&cur_pipecfg->src_rect) > max_linewidth) ||
> > > + _dpu_plane_calc_clk(mode, cur_pipecfg) > max_mdp_clk_rate) {
> > > + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[cfg_idx + 1];
> > > +
> > > + if (drm_rect_width(&cur_pipecfg->src_rect) > 2 * max_linewidth) {
> > > + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> > > + DRM_RECT_ARG(&cur_pipecfg->src_rect), max_linewidth);
> > > + return -E2BIG;
> > > + }
> > > +
> > > + memcpy(r_pipe_cfg, cur_pipecfg, sizeof(struct dpu_sw_pipe_cfg));
> > > + cur_pipecfg->src_rect.x2 = (cur_pipecfg->src_rect.x1 + cur_pipecfg->src_rect.x2) >> 1;
> > > + cur_pipecfg->dst_rect.x2 = (cur_pipecfg->dst_rect.x1 + cur_pipecfg->dst_rect.x2) >> 1;
> >
> > pipe_cfg. If you need, rename the topmost var name.
>
> OK. pipe_cfg_cur ?
screen_pipe_cfg
>
> >
> > > + r_pipe_cfg->src_rect.x1 = cur_pipecfg->src_rect.x2;
> > > + r_pipe_cfg->dst_rect.x1 = cur_pipecfg->dst_rect.x2;
> > > + r_pipe_cfg->valid = true;
> > > + DPU_DEBUG_PLANE(pdpu, "Split super wide plane into:"
> > > + DRM_RECT_FMT " and " DRM_RECT_FMT "\n",
> > > + DRM_RECT_ARG(&cur_pipecfg->src_rect),
> > > + DRM_RECT_ARG(&r_pipe_cfg->src_rect));
> > > + } else {
> > > + memset(&pstate->pipe_cfg[cfg_idx + 1], 0, sizeof(struct dpu_sw_pipe_cfg));
> > > + memset(&pstate->pipe[cfg_idx + 1], 0, sizeof(struct dpu_sw_pipe));
> >
> > Please keep using r_pipe_cfg here.
>
> OK, will make r_pipe_cfg a variable in function scope, not bracket scope.
> >
> > > + }
> > >
> > > - drm_rect_rotate_inv(&pipe_cfg->src_rect,
> > > - new_plane_state->fb->width, new_plane_state->fb->height,
> > > - new_plane_state->rotation);
> > > - if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
> > > - drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> > > + drm_rect_rotate_inv(&cur_pipecfg->src_rect,
> > > new_plane_state->fb->width, new_plane_state->fb->height,
> > > new_plane_state->rotation);
> > > + }
> > >
> > > pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
> > >
> > >
> > > --
> > > 2.34.1
> > >
> >
> > --
> > With best wishes
> > Dmitry
--
With best wishes
Dmitry
More information about the Freedreno
mailing list