[PATCH 10/21] drm/msm/dpu: add CWB support to dpu_hw_wb

Jessica Zhang quic_jesszhan at quicinc.com
Tue Sep 3 22:22:31 UTC 2024



On 8/30/2024 10:41 AM, Dmitry Baryshkov wrote:
> On Thu, Aug 29, 2024 at 01:48:31PM GMT, Jessica Zhang wrote:
>> From: Esha Bharadwaj <quic_ebharadw at quicinc.com>
>>
>> Add function ops to allow hw_wb to configure CWB registers and adjust
>> the WB_MUX configuration to account for using dedicated CWB pingpong
>> blocks.
>>
>> Signed-off-by: Esha Bharadwaj <quic_ebharadw at quicinc.com>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 69 ++++++++++++++++++++++++++++++-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h | 34 +++++++++++++++
>>   2 files changed, 102 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> index 93ff01c889b5..998c9fbd22a6 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> @@ -51,6 +51,12 @@
>>   #define WB_CDP_CNTL                           0x2B4
>>   #define WB_OUT_IMAGE_SIZE                     0x2C0
>>   #define WB_OUT_XY                             0x2C4
> 
> Empty line
> 
>> +#define CWB_MUX                               0x000
>> +#define CWB_MODE                              0x004
>> +
>> +/* CWB mux block bit definitions */
>> +#define CWB_MUX_MASK                          GENMASK(3, 0)
>> +#define CWB_MODE_MASK                         GENMASK(2, 0)
>>   
>>   static void dpu_hw_wb_setup_outaddress(struct dpu_hw_wb *ctx,
>>   		struct dpu_hw_wb_cfg *data)
>> @@ -173,7 +179,9 @@ static void dpu_hw_wb_bind_pingpong_blk(
>>   	mux_cfg = DPU_REG_READ(c, WB_MUX);
>>   	mux_cfg &= ~0xf;
>>   
>> -	if (pp)
>> +	if (pp >= PINGPONG_CWB_0)
>> +		mux_cfg |= (pp < PINGPONG_CWB_2) ? 0xd : 0xb;
>> +	else if (pp)
>>   		mux_cfg |= (pp - PINGPONG_0) & 0x7;
>>   	else
>>   		mux_cfg |= 0xf;
>> @@ -237,3 +245,62 @@ struct dpu_hw_wb *dpu_hw_wb_init(struct drm_device *dev,
>>   
>>   	return c;
>>   }
>> +
>> +static void dpu_hw_cwb_setup_input_ctrl(struct dpu_hw_wb *ctx,
>> +				enum dpu_cwb cwb_idx,
>> +				const enum dpu_pingpong pp)
> 
> Align to opening bracket, please.

Hi Dmitry,

Acked for all comments here -- I'll squash the 2 cwb ops together.

Thanks,

Jessica Zhang

> 
>> +{
>> +	struct dpu_hw_blk_reg_map *c;
>> +	int cwb_mux_cfg = 0xF;
>> +
>> +	if (cwb_idx < CWB_0 || cwb_idx >= CWB_MAX)
>> +		return;
>> +
>> +	c = &ctx->cwb_hw[cwb_idx - CWB_0];
>> +
>> +	/*
>> +	 * The CWB_MUX register takes the pingpong index relative to
>> +	 * PINGPONG_CWB_0 and not PINGPONG_0
>> +	 */
>> +	if ((pp != PINGPONG_NONE) && (pp < PINGPONG_MAX))
>> +		cwb_mux_cfg = FIELD_PREP(CWB_MUX_MASK, pp - PINGPONG_CWB_0);
>> +
>> +	DPU_REG_WRITE(c, CWB_MUX, cwb_mux_cfg);
>> +}
>> +
>> +static void dpu_hw_cwb_setup_input_mode(struct dpu_hw_wb *ctx,
>> +				enum dpu_cwb cwb_idx,
>> +				const enum cwb_mode_input input)
>> +{
>> +	struct dpu_hw_blk_reg_map *c;
>> +	int cwb_mux_cfg;
>> +
>> +	if (cwb_idx < CWB_0 || cwb_idx >= CWB_MAX || input >= INPUT_MODE_MAX)
>> +		return;
>> +
>> +	c = &ctx->cwb_hw[cwb_idx - CWB_0];
>> +	cwb_mux_cfg = FIELD_PREP(CWB_MODE_MASK, input);
>> +
>> +	DPU_REG_WRITE(c, CWB_MODE, cwb_mux_cfg);
>> +}
>> +
>> +static void _setup_cwb_ops(struct dpu_hw_wb_ops *ops)
>> +{
>> +	ops->setup_input_ctrl = dpu_hw_cwb_setup_input_ctrl;
>> +	ops->setup_input_mode = dpu_hw_cwb_setup_input_mode;
>> +}
>> +
>> +struct dpu_hw_wb *dpu_hw_wb_init_with_cwb(struct drm_device *dev,
>> +				 const struct dpu_wb_cfg *cfg,
>> +				 void __iomem *addr,
>> +				 const struct dpu_mdss_version *mdss_rev,
>> +				 struct dpu_hw_blk_reg_map *cwb_hw)
>> +{
>> +	struct dpu_hw_wb *c = dpu_hw_wb_init(dev, cfg, addr, mdss_rev);
>> +
>> +	c->cwb_hw = cwb_hw;
>> +
>> +	_setup_cwb_ops(&c->ops);
>> +
>> +	return c;
>> +}
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> index 37497473e16c..1ff40f8325e5 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> @@ -21,6 +21,12 @@ struct dpu_hw_wb_cfg {
>>   	struct drm_rect crop;
>>   };
>>   
>> +enum cwb_mode_input {
>> +	INPUT_MODE_LM_OUT,
>> +	INPUT_MODE_DSPP_OUT,
>> +	INPUT_MODE_MAX
>> +};
>> +
>>   /**
>>    *
>>    * struct dpu_hw_wb_ops : Interface to the wb hw driver functions
>> @@ -31,6 +37,8 @@ struct dpu_hw_wb_cfg {
>>    *  @setup_cdp:       setup chroma down prefetch block for writeback block
>>    *  @setup_clk_force_ctrl: setup clock force control
>>    *  @bind_pingpong_blk: enable/disable the connection with ping-pong block
>> + *  @setup_ctrl: setup ctrl register for cwb
>> + *  @setup_mode: setup mode register for cwb
>>    */
>>   struct dpu_hw_wb_ops {
>>   	void (*setup_outaddress)(struct dpu_hw_wb *ctx,
>> @@ -54,11 +62,20 @@ struct dpu_hw_wb_ops {
>>   
>>   	void (*bind_pingpong_blk)(struct dpu_hw_wb *ctx,
>>   				  const enum dpu_pingpong pp);
>> +
>> +	void (*setup_input_ctrl)(struct dpu_hw_wb *ctx,
>> +				 enum dpu_cwb cwb_idx,
>> +				 const enum dpu_pingpong pp);
>> +
>> +	void (*setup_input_mode)(struct dpu_hw_wb *ctx,
>> +				 enum dpu_cwb cwb_idx,
>> +				 const enum cwb_mode_input input);
> 
> Judging by the usage, could you please add single setup_cwb() callback
> and let WB code call corresponding functions internally.
> 
>>   };
>>   
>>   /**
>>    * struct dpu_hw_wb : WB driver object
>>    * @hw: block hardware details
>> + * @cwb_hw: block hardware details of cwb_muxes
>>    * @idx: hardware index number within type
>>    * @wb_hw_caps: hardware capabilities
>>    * @ops: function pointers
>> @@ -66,6 +83,9 @@ struct dpu_hw_wb_ops {
>>   struct dpu_hw_wb {
>>   	struct dpu_hw_blk_reg_map hw;
>>   
>> +	/* cwb data */
>> +	struct dpu_hw_blk_reg_map *cwb_hw;
>> +
>>   	/* wb path */
>>   	int idx;
>>   	const struct dpu_wb_cfg *caps;
>> @@ -87,4 +107,18 @@ struct dpu_hw_wb *dpu_hw_wb_init(struct drm_device *dev,
>>   				 void __iomem *addr,
>>   				 const struct dpu_mdss_version *mdss_rev);
>>   
>> +/**
>> + * dpu_hw_wb_init_with_cwb() - Initializes the writeback hw driver object with cwb.
>> + * @dev:  Corresponding device for devres management
>> + * @cfg:  wb_path catalog entry for which driver object is required
>> + * @addr: mapped register io address of MDP
>> + * @hw: array of cwb muxes
>> + * Return: Error code or allocated dpu_hw_wb context
>> + */
> 
> Please move the comment to the function body. This way make W=1 will
> check that it is valid.
> 
>> +struct dpu_hw_wb *dpu_hw_wb_init_with_cwb(struct drm_device *dev,
>> +					const struct dpu_wb_cfg *cfg,
>> +					void __iomem *addr,
>> +					const struct dpu_mdss_version *mdss_rev,
>> +					struct dpu_hw_blk_reg_map *hw);
>> +
>>   #endif /*_DPU_HW_WB_H */
>>
>> -- 
>> 2.34.1
>>
> 
> -- 
> With best wishes
> Dmitry


More information about the Freedreno mailing list