[PATCH v3 02/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615

[Xiangxu Yin]

Add device tree binding documentation for the Qualcomm QMP USB3+DP PHY
on QCS615 Platform. This PHY supports both USB3 and DP functionality
over USB-C, with PHY mode switching capability. It does not support
combo mode.

Signed-off-by: Xiangxu Yin <xiangxu.yin at oss.qualcomm.com>
---
 .../bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml   | 108 +++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..c2b1fbab2930f0653f4ddb95f7b54d8fe994f92d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qcs615-qmp-usb3dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP USB3-DP PHY controller (DP, QCS615)
+
+maintainers:
+  - Vinod Koul <vkoul at kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for both
+  USB3 and DisplayPort over USB-C. While it enables mode switching
+  between USB3 and DisplayPort, but does not support combo mode.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs615-qmp-usb3-dp-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: cfg_ahb
+      - const: ref
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy_phy
+      - const: dp_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 1
+    description:
+      See include/dt-bindings/phy/phy-qcom-qmp.h
+
+  "#phy-cells":
+    const: 1
+    description:
+      See include/dt-bindings/phy/phy-qcom-qmp.h
+
+  qcom,tcsr-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the VLS CLAMP register
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the DP PHY mode register
+    description: Clamp and PHY mode register present in the TCSR
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - "#phy-cells"
+  - qcom,tcsr-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy at 88e8000 {
+      compatible = "qcom,qcs615-qmp-usb3-dp-phy";
+      reg = <0x88e8000 0x2000>;
+
+      clocks = <&gcc GCC_AHB2PHY_WEST_CLK>,
+               <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+      clock-names = "cfg_ahb",
+                    "ref";
+
+      resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR >,
+               <&gcc GCC_USB3_DP_PHY_SEC_BCR>;
+      reset-names = "phy_phy",
+                    "dp_phy";
+
+      vdda-phy-supply = <&vreg_l11a>;
+      vdda-pll-supply = <&vreg_l5a>;
+
+      #clock-cells = <1>;
+      #phy-cells = <1>;
+
+      qcom,tcsr-reg = <&tcsr 0xbff0>,
+                      <&tcsr 0xb24c>;
+    };

-- 
2.34.1