[PATCH v3 10/14] phy: qcom: qmp-usbc: Add TCSR parsing and USB/DP mode mutex handling

Xiangxu Yin xiangxu.yin at oss.qualcomm.com
Wed Aug 20 09:34:52 UTC 2025


Parse TCSR registers to support DP mode signaling via dp_phy_mode_reg.
Introduce mutual exclusion between USB and DP PHY modes to prevent
simultaneous activation. Also update com_init/com_exit to reflect DP
mode initialization and cleanup.

Signed-off-by: Xiangxu Yin <xiangxu.yin at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 60 +++++++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index a1495a2029cf038bb65c36e42d0a4f633e544558..821398653bef23e1915d9d3a3a2950b0bfbefb9a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -674,7 +674,7 @@ static const struct qmp_phy_cfg qcs615_usb3dp_phy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_usbdp_vreg_l),
 };
 
-static int qmp_usbc_com_init(struct phy *phy)
+static int qmp_usbc_com_init(struct phy *phy, bool is_dp)
 {
 	struct qmp_usbc *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -704,15 +704,20 @@ static int qmp_usbc_com_init(struct phy *phy)
 	if (ret)
 		goto err_assert_reset;
 
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
+	if (!is_dp) {
+		qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
 
 #define SW_PORTSELECT_VAL			BIT(0)
 #define SW_PORTSELECT_MUX			BIT(1)
-	/* Use software based port select and switch on typec orientation */
-	val = SW_PORTSELECT_MUX;
-	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
-		val |= SW_PORTSELECT_VAL;
-	writel(val, qmp->pcs_misc);
+		/* Use software based port select and switch on typec orientation */
+		val = SW_PORTSELECT_MUX;
+		if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
+			val |= SW_PORTSELECT_VAL;
+		writel(val, qmp->pcs_misc);
+	}
+
+	if (qmp->tcsr_map && qmp->dp_phy_mode_reg)
+		regmap_write(qmp->tcsr_map, qmp->dp_phy_mode_reg, is_dp);
 
 	return 0;
 
@@ -733,6 +738,9 @@ static int qmp_usbc_com_exit(struct phy *phy)
 
 	clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
 
+	if (qmp->tcsr_map && qmp->dp_phy_mode_reg)
+		regmap_write(qmp->tcsr_map, qmp->dp_phy_mode_reg, 0);
+
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 
 	return 0;
@@ -1045,6 +1053,17 @@ static int qmp_usbc_usb_power_off(struct phy *phy)
 	return 0;
 }
 
+static int qmp_check_mutex_phy(struct qmp_usbc *qmp, bool is_dp)
+{
+	if ((is_dp && qmp->usb_init_count) ||
+	    (!is_dp && qmp->dp_init_count)) {
+		dev_err(qmp->dev, "%s PHY busy\n", is_dp ? "USB" : "DP");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
 static int qmp_usbc_usb_enable(struct phy *phy)
 {
 	struct qmp_usbc *qmp = phy_get_drvdata(phy);
@@ -1052,7 +1071,11 @@ static int qmp_usbc_usb_enable(struct phy *phy)
 
 	mutex_lock(&qmp->phy_mutex);
 
-	ret = qmp_usbc_com_init(phy);
+	ret = qmp_check_mutex_phy(qmp, false);
+	if (ret)
+		goto out_unlock;
+
+	ret = qmp_usbc_com_init(phy, false);
 	if (ret)
 		goto out_unlock;
 
@@ -1103,7 +1126,11 @@ static int qmp_usbc_dp_enable(struct phy *phy)
 
 	mutex_lock(&qmp->phy_mutex);
 
-	ret = qmp_usbc_com_init(phy);
+	ret = qmp_check_mutex_phy(qmp, true);
+	if (ret)
+		goto dp_init_unlock;
+
+	ret = qmp_usbc_com_init(phy, true);
 	if (ret)
 		goto dp_init_unlock;
 
@@ -1467,7 +1494,7 @@ static int qmp_usbc_typec_switch_set(struct typec_switch_dev *sw,
 		qmp_usbc_usb_power_off(qmp->usb_phy);
 		qmp_usbc_com_exit(qmp->usb_phy);
 
-		qmp_usbc_com_init(qmp->usb_phy);
+		qmp_usbc_com_init(qmp->usb_phy, false);
 		qmp_usbc_usb_power_on(qmp->usb_phy);
 	}
 
@@ -1602,13 +1629,13 @@ static int qmp_usbc_parse_usb_dt(struct qmp_usbc *qmp)
 	return 0;
 }
 
-static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
+static int qmp_usbc_parse_tcsr(struct qmp_usbc *qmp)
 {
 	struct of_phandle_args tcsr_args;
 	struct device *dev = qmp->dev;
 	int ret;
 
-	/*  for backwards compatibility ignore if there is no property */
+	/*  for backwards compatibility ignore if there is 1 or no property */
 	ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg", 1, 0,
 					       &tcsr_args);
 	if (ret == -ENOENT)
@@ -1623,6 +1650,13 @@ static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
 
 	qmp->vls_clamp_reg = tcsr_args.args[0];
 
+	ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg", 1, 1,
+					       &tcsr_args);
+	if (ret == -ENOENT)
+		return 0;
+
+	qmp->dp_phy_mode_reg = tcsr_args.args[0];
+
 	return 0;
 }
 
@@ -1665,7 +1699,7 @@ static int qmp_usbc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = qmp_usbc_parse_vls_clamp(qmp);
+	ret = qmp_usbc_parse_tcsr(qmp);
 	if (ret)
 		return ret;
 

-- 
2.34.1



More information about the Freedreno mailing list