[PATCH v2 4/5] dt-bindings: display/msm: dsi-controller-main: Document dual panel property

[Jun Nie]

The DSI interface can be connected to a panel that has a dual DSI channel,
or to two separate panels, each equipped with a single DSI channel. To
prevent the DSC configuration for the dual panel setup from disrupting the
current configuration of a single panel with a dual DSI channel, add a dual
panel property to support the use of two panels.

Signed-off-by: Jun Nie <jun.nie at linaro.org>
---
 .../devicetree/bindings/display/msm/dsi-controller-main.yaml      | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index ffbd1dc9470e2091b477b0c88392d81802119f48..e3f2eabde27609a66d6d81fafcb14e1bc014613c 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -88,9 +88,15 @@ properties:
   qcom,dual-dsi-mode:
     type: boolean
     description: |
-      Indicates if the DSI controller is driving a panel which needs
+      Indicates if the DSI controller is driving display device which needs
       2 DSI links.
 
+  qcom,dual-panel:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is driving display device that composed
+      with 2 independent panels and needs 2 DSI links.
+
   qcom,master-dsi:
     type: boolean
     description: |

-- 
2.34.1