[PATCH 07/11] arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes

[Konrad Dybcio]

On 25.02.2025 1:18 PM, Ayushi Makhija wrote:
> Add anx7625 DSI to DP bridge device nodes.
> 
> Signed-off-by: Ayushi Makhija <quic_amakhija at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 136 ++++++++++++++++++++-
>  1 file changed, 135 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> index 175f8b1e3b2d..151f66512303 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> @@ -517,9 +517,128 @@ &i2c11 {
>  
>  &i2c18 {
>  	clock-frequency = <400000>;
> -	pinctrl-0 = <&qup_i2c18_default>;
> +	pinctrl-0 = <&qup_i2c18_default>,
> +			<&io_expander_intr_active>,
> +			<&io_expander_reset_active>;

Please align the '<'s

>  	pinctrl-names = "default";
> +
>  	status = "okay";
> +
> +	io_expander: gpio at 74 {
> +		compatible = "ti,tca9539";
> +		reg = <0x74>;
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <98 IRQ_TYPE_EDGE_BOTH>;

use interrupts-extended, here and below

Konrad