[PATCH 11/35] drm/msm/dpu: get rid of DPU_CTL_ACTIVE_CFG

[Abhinav Kumar]

On 1/22/2025 1:53 AM, Dmitry Baryshkov wrote:
> On Tue, Jan 21, 2025 at 04:58:03PM -0800, Abhinav Kumar wrote:
>>
>>
>> On 12/13/2024 2:14 PM, Dmitry Baryshkov wrote:
>>> Continue migration to the MDSS-revision based checks and replace
>>> DPU_CTL_ACTIVE_CFG feature bit with the core_major_ver >= 5 check.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h  | 8 ++------
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h | 8 ++------
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_2_sm7150.h  | 8 ++------
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h  | 6 ------
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_0_sm8250.h  | 8 ++------
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_2_sc7180.h  | 3 ---
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_3_sm6115.h  | 1 -
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h  | 4 ----
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_5_qcm2290.h | 1 -
>>>    drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h  | 1 -
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c    | 2 +-
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c     | 7 ++-----
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c          | 3 +--
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h          | 1 -
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c              | 2 +-
>>>    15 files changed, 13 insertions(+), 50 deletions(-)
>>>
>>
>> <snip>
>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
>>> index e9bbccc44dad8b391cd51daf902307105b2598fc..e16b0a0c57da4a1aa77064ca2214e37cd9ee4baa 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
>>> @@ -66,7 +66,7 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>>>    	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>>>    	/* setup which pp blk will connect to this intf */
>>> -	if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && phys_enc->hw_intf->ops.bind_pingpong_blk)
>>> +	if (phys_enc->hw_intf->ops.bind_pingpong_blk)
>>>    		phys_enc->hw_intf->ops.bind_pingpong_blk(
>>>    				phys_enc->hw_intf,
>>>    				phys_enc->hw_pp->idx);
>>
>> Was it intentional to drop the DPU_CTL_ACTIVE_CFG here but not replace it
>> with core_major_rev >= 5?
> 
> The bind_pingpong_blk is only defined for 5.x+ platforms, so the check
> is useless.
> 

ack

Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>