[gst-devel] Problems when using osssink in ARM
Ali Sabil
ali.sabil at tandberg.com
Thu Sep 20 21:36:25 CEST 2007
Hi,
maybe you can first try replacing the osssink by a fakesink and setting
it's property dump=true :
gst-launch-0.10 -v filesrc location=~/Media/test.mp3 ! mad !
audioconvert ! audioresample ! fakesink dump=true
then try the GST_DEBUG :
GST_DEBUG="baseaudiosink:4, audiosink:4" gst-launch-0.10 filesrc
location=~/Media/test.mp3 ! mad ! audioconvert ! audioresample ! osssink
Cheers,
--
Ali
On Thu, 2007-09-20 at 09:50 +0800, Joyious He wrote:
> Hi Jianjun,
>
> Here is the correct output,the previous one is copied from terminal,
> and there is someything shows wrong:
>
> /pipeline0/flump3dec0.src: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(int)2
> /pipeline0/audioconvert0.src: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(int)2
> /pipeline0/audioconvert0.sink: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(int)2
> /pipeline0/audioresample0.src: caps = audio/x-raw-int, width=(int)16,
> depth=(int)16, signed=(boolean)true, endianness=(int)1234,
> channels=(int)2, rate=(int)48000
> /pipeline0/audioresample0.sink: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(int)2
> /pipeline0/osssink0.sink: caps = audio/x-raw-int, width=(int)16,
> depth=(int)16, signed=(boolean)true, endianness=(int)1234,
> channels=(int)2, rate=(int)48000
> New clock: GstAudioSinkClock
>
>
> so here the audio resample src seems to be accord to my osssink, but
> still the same, no sound came out.what should i do next ?
>
>
>
>
> 在2007-09-19，"jianjun.yang.cn" <jianjun.yang.cn at gmail.com> 写道：
> Hi Joyious,
>
> I think the problem lies in that audioresample fails to
> convert from 44100 hz to 48000 hz. Your oss driver does not
> support 44100, but the rate of 1.mp3 is 44100. So the
> audioresample should resample.
> But according to your output, rate of audioresample's source
> pad is different with the one of osssink's sink pad. The
> former is 0, while the latter is 48000.
> I test the pipleline on my PC using osssink. It can work well.
>
> my command line:
> gst-launch-0.10 -v filesrc
> location= /home/jianjun/206851.mp3 ! mad ! audioconvert !
> audioresample ! osssink
>
> And its output:
>
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> /pipeline0/mad0.src: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)32,
> depth=(int)32, rate=(int)44100, channels=(int)2
> /pipeline0/audioconvert0.src: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)44100
> /pipeline0/audioconvert0.sink: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)32,
> depth=(int)32, rate=(int)44100, channels=(int)2
> /pipeline0/audioresample0.src: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)44100
> /pipeline0/audioresample0.sink: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)44100
> /pipeline0/osssink0.sink: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)44100
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstAudioSinkClock
>
>
> Regards,
> Jianjun
>
>
> 2007-09-19
>
> ______________________________________________________________
> jianjun.yang.cn
>
> ______________________________________________________________
> 发件人： 何慧敏
> 发送时间： 2007-09-19 15:52:35
> 收件人： gstreamer-devel
> 抄送：
> 主题： [gst-devel] Problems when using osssink in ARM
>
> Hi all,
>
> Now I have ported the gstreamer to ARM 11, and there is a OSS
> driver for this ARM board. So I am trying to make this sound
> workI have installed the plugin for ossaudio.But when i trying
> to play some media file, no sound came out, and the screen
> just show the PLAYING message ..
>
> some addtional messages:
> the osssink does play the audiotestsrc,and sounds a single
> tone;
> the audioconvert works fine when "gst-launch -v filesrc
> location="/usr/local/bin/1.mp3" ! flump3dec ! audioconvert !
> wavenc ! filesink location="/usr/local/bin/1.wav" ",I can hear
> the wav file on my PC,so the decodec is fine;
> even no sound comes out when playing, but there are some
> noises when pipeline is just prerolling just before PLAYING.
>
>
> Here are the command and output:
> ***********************************************************************************************************
> mx31# gst-launch -v filesrc location="/usr/local/bin/1.mp3" !
> flump3dec ! audioconvert ! audioresample ! osssink
> Setting pipeline to PAUSED ...
>
> MXC Enable Codec(write)
> Feb 6 12:04:07 freescale user.warn kernel:
> Feb 6 12:04:07 freescale user.warn kernel: MXC Enable
> Codec(write)
> Pipeline is PREROLLING ...
> /pipeline0/flump3dec0.src: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(int)2
> /pipeline0/audioconvert0.src: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(i2
> /pipeline0/audioconvert0.sink: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=(2
> /pipeline0/audioresample0.src: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)0
> /pipeline0/audioresample0.sink: caps = audio/x-raw-int,
> endianness=(int)1234, signed=(boolean)true, width=(int)16,
> depth=(int)16, rate=(int)44100, channels=2
> /pipeline0/osssink0.sink: caps = audio/x-raw-int,
> width=(int)16, depth=(int)16, signed=(boolean)true,
> endianness=(int)1234, channels=(int)2, rate=(int)48000
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstAudioSinkClock
> mxc_audio_output_block: count = 1024
> Feb 6 12:04:37 freescale user.warn kernel:
> mxc_audio_output_block: count = 1024
>
> *************************************************************************************************************
>
> So I'm studying the code of osssink although I am a totally
> newcomer to this gstreamer and Linux things.
>
> Many Thanks,
>
> Joyious
>
>
>
>
>
>
>
> ______________________________________________________________
> 杀70万种木马病毒，瑞星2008版免费
>
>
>
> ______________________________________________________________________
> 杀70万种木马病毒，瑞星2008版免费
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________ gstreamer-devel mailing list gstreamer-devel at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
More information about the gstreamer-devel
mailing list