[gst-devel] Theora w/ farsight2

[Miron Kunz]

Hi,
All my video/audio sinks on receiving end have sync=false. The sending part is handled by Farsight2 and it looks like sync=false is set there too.

Thanks,
Mironoz

> 
> Hi ,
> 
> Use "sync=false" property with both the sinks at sending and receiving end , and then see the behaviour . 
> 
> 
> 
> 2010/7/14 Miron Kunz <mironoz at mail.ru>
> Hi,
> 
> My problem seems to be related to Theora encoder.
> 
> With the number of discontinued buffers increasing I am likely to get distorted image on the receiving end:
> 
> 0:01:55.343750000 4492 00DF2698 DEBUG theoraenc gsttheoraenc.c:829:theora_enc_is_discontinuous:<theoraen
> c4> Incoming TS 0:01:50.345187500 exceeds expected value 0:01:48.955312500 by too much, marking discontinuity
> 
> If I increase threshold for late/discontinued buffers - the receiving end shows video w/o artifacts.
> 
> I am not sure yet how to interpret the observation because I see discontinued buffers in this pipeline which still produces the fine video:
> gst-launch --gst-debug="theoraenc:5" dshowvideosrc!ffmpegcolorspace!theoraenc!theoradec!ffmpegcolorspace!directdrawsink
> 
> One more thing - on every discontinued packet, the theora codec is deallocated and reincarnated again by theora_enc_reset(). For performance sake it looks suspicious to me.
> 
> Thanks,
> Miron
> 
> 
> 
> 
> 
> 
> >
> > Hi,
> >
> > I updated to Farsight2, 0.0.20
> > set VER_GST=0.10.29
> > set VER_GST_PLUGINS_BASE=0.10.29
> > set VER_GST_PLUGINS_GOOD=0.10.22
> >
> >
> > But I am still getting distorted video when Theora codec is used.
> >
> > Looks like frames between I-frames are not properly decoded.
> >
> > Anything I can check?
> >
> > Thanks,
> > Mironoz
> >
> >
> >
> > > Hi,
> > >
> > > I am using Theora codec w/ farsigh2 (no Telepathy) for video conferencing and I am facing distorted video on the receiving end when using camera with relatively high resolution on the sending end. Low resolution streams are decoded alright by the receiver. I ran receiver/sender on the same host so the bandwidth should not be a problem. CPU consumption was low too.
> > > The artifacts in the video I see most often are small squares(up to 16x16 or so pixels) with 2 white and 1 black stripes in it.
> > >
> > > Here is versions of the gstreamer/farsight2 I am using:
> > >
> > > set VER_GST=0.10.25
> > > set VER_GST_PLUGINS_GL=0.10.1
> > > set VER_GST_PLUGINS_BASE=0.10.25
> > > set VER_GST_PLUGINS_GOOD=0.10.17
> > > set VER_GST_PLUGINS_UGLY=0.10.13
> > > set VER_GST_PLUGINS_BAD=0.10.17
> > > Farsight2 0.0.16
> > >
> > > I read on this list about incompatibilities between certain versions of the Fs and gstreamer. I wonder if I am running in it here or it is something else.
> > >
> > > Thanks,
> > > Miron
> >
> >
> > Найди все ролики Интернета в поиске по видео
> > http://r.mail.ru/cln5070/go.mail.ru/
> >
> > ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Sprint
> > What will you do first with EVO, the first 4G phone?
> > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
> 
> 
> 
> 
> Тесты новейших гаджетов на Hi-tech.Mail.Ru
> http://r.mail.ru/cln5823/hi-tech.mail.ru/
> 
> 
> 
> 
> 
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Sprint
> What will you do first with EVO, the first 4G phone?
> Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
> 
> 
> 
> 
> 
> 
> -- 
> Regards,
> 
> Sudarshan Bisht


"Барахолка" на Товары@Mail.Ru. Покупай дешево, продавай выгодно. http://r.mail.ru/cln4270/torg.mail.ru/used/