Help with Gstreamer and RTSP with Axis Camera
Tom Hendrick
sdtom182 at yahoo.com
Sat Apr 9 14:11:28 PDT 2011
Nicola, Thanks so much!
When I do:
gst-launch-0.10 -e rtspsrc
location=rtsp://root:pass@192.168.2.127/mpeg4/media.amp ! rtpmp4vdepay !
mpeg4videoparse ! gdppay ! filesink location=/tmp/test.gdp
and then playback with
gst-launch-0.10 filesrc location=/tmp/test.gdp ! gdpdepay !
ffdec_mpeg4 ! xvimagesink
It works great. Do you think this uses a lot more processing power than using something like mencoder or openRTSP to just copy the stream and save it to file?
Thanks so much for your help
Tom
--- On Sat, 4/9/11, Mailing List SVR <lists at svrinformatica.it> wrote:
From: Mailing List SVR <lists at svrinformatica.it>
Subject: Re: Help with Gstreamer and RTSP with Axis Camera
To: "Tom Hendrick" <sdtom182 at yahoo.com>
Cc: "Discussion of the development of and with GStreamer" <gstreamer-devel at lists.freedesktop.org>, t.i.m at zen.co.uk
Date: Saturday, April 9, 2011, 8:57 PM
Sorry the right pipe is the following:
gst-launch-0.10 -e rtspsrc
location=rtsp://root:pass@192.168.2.127/mpeg4/media.amp ! rtpmp4vdepay !
mpeg4videoparse ! matroskamux ! filesink location=/tmp/test.mkv
and then playback with playbin or any stardard player
or
gst-launch-0.10 -e rtspsrc
location=rtsp://root:pass@192.168.2.127/mpeg4/media.amp ! rtpmp4vdepay !
mpeg4videoparse ! gdppay ! filesink location=/tmp/test.gdp
and then playback with
gst-launch-0.10 filesrc location=/tmp/test.gdp ! gdpdepay !
ffdec_mpeg4 ! xvimagesink
Nicola
Il giorno sab, 09/04/2011 alle 13.14 -0700, Tom Hendrick ha scritto:
> Thanks so much,
> When I run:
>
> gst-launch rtspsrc location=rtsp://192.168.0.90/mpeg4/media.amp !
> rtpmp4vdepay ! matroskamux ! filesink location=test.mkv
>
> I get : streaming task paused, reason not-negotiated (-4)
>
> when I run :
>
> gst-launch rtspsrc location=rtsp://192.168.0.90/mpeg4/media.amp !
> rtpmp4vdepay ! gdppay ! filesink location=test.gdp
>
> Control ^C out of it, and then:
>
> gst-launch filesrc location=test.mkv ! gdpdepay ! decodebin2 !
> autovideosink
>
> It works! but the quality of the image is much lower than when I run
> gst-launch playbin uri=rtsp://192.168.0.90/mpeg4/media.amp
>
>
> Is this because of the muxer, what else can I try?
>
> thanks
> Tom
>
>
>
> --- On Sat, 4/9/11, Mailing List SVR <lists at svrinformatica.it> wrote:
>
> From: Mailing List SVR <lists at svrinformatica.it>
> Subject: Re: Help with Gstreamer and RTSP with Axis Camera
> To: "Discussion of the development of and with GStreamer"
> <gstreamer-devel at lists.freedesktop.org>
> Cc: t.i.m at zen.co.uk, "Tom Hendrick" <sdtom182 at yahoo.com>
> Date: Saturday, April 9, 2011, 7:25 PM
>
> You need a muxer try this:
>
> gst-launch rtspsrc
> location=rtsp://192.168.0.90/mpeg4/media.amp !
> rtpmp4vdepay ! matroskamux ! filesink location=test.mkv
>
> then you'll be able to play the video with playbin.
>
> You can also try:
>
> gst-launch rtspsrc
> location=rtsp://192.168.0.90/mpeg4/media.amp !
> rtpmp4vdepay ! gdppay ! filesink location=test.gdp
>
> and then:
>
> gst-launch filesrc location=test.mkv ! gdpdepay ! decodebin2 !
> autovideosink
>
> regards
> Nicola
>
>
>
> Il giorno sab, 09/04/2011 alle 10.33 -0700, Tom Hendrick ha
> scritto:
> >
> > I tried:
> >
> > gst-launch rtspsrc
> location=rtsp://192.168.0.90/mpeg4/media.amp !
> > rtpmp4vdepay ! filesink=txcap.ts
> >
> > and I didn't get the link error and it saved to a file.
> >
> > When I try to play it with gstreamer using:
> >
> > gst-launch playbin uri=file://txcap.ts, or gst-launch-0.10
> playbin2
> > uri=file://txcap.ts,
> >
> > it plays too fast and the lower half of the each frame has
> some weird
> > block distortions.
> >
> > When I do:
> > mplayer txcap.ts it also plays too fast but I don't see the
> weird
> > block distortions on the lower left half of each frame, but
> when I do
> > mplayer -fps 1 txcap.ts it plays fine.
> >
> >
> > When I do gst-launch playbin
> uri=rtsp://192.168.0.90/mpeg4/media.amp
> > it shows the video feed just fine without that distotion in
> the lower
> > half. I'd like to make the saved file work with gstreamer
> because I
> > had some cache problems with mplayer on the receiver in the
> past.
> >
> > Could it have anything to do with the fact Axis uses MPEG-ES
> formats?
> > Any other ideas?
> >
> > Thanks
> > Tom
> >
> > --- On Sat, 4/9/11, Tom Hendrick <sdtom182 at yahoo.com> wrote:
> >
> > From: Tom Hendrick <sdtom182 at yahoo.com>
> > Subject: Re: Help with Gstreamer and RTSP with Axis
> Camera
> > To: t.i.m at zen.co.uk, "Discussion of the development
> of and
> > with GStreamer"
> <gstreamer-devel at lists.freedesktop.org>
> > Date: Saturday, April 9, 2011, 5:13 PM
> >
> > Thanks Tim,
> >
> > I can see a live feed from the Axis camera when I
> do:
> >
> > gst-launch-0.10 playbin2
> > uri=rtsp://192.168.0.90/mpeg4/media.amp
> >
> >
> > I can't figure out how to modify my transmit and
> receive
> > commands given that I need to depay. I've read up
> on the
> > gstreamer site and checked other forums but still
> can't figure
> > it out. When I do "gst-launch rtspsrc
> > location=rtsp://192.168.0.90/mpeg4/media.amp !
> > rtpmp4gdepay ! filesink=txcap.ts" I get an error
> saying
> > "streaming task paused, reason not-linked (-1)".
> >
> >
> > Do you know how I would modify them, here they are
> again?
> >
> > gst-launch rtspsrc
> > location=rtsp://192.168.0.90/mpeg4/media.amp !
> > filesink=txcap.ts
> >
> > gst-launch playbin uri=file://txcap.ts
> >
> > Thanks
> > Tom
> >
> >
> > --- On Sat, 4/9/11, Tim-Philipp Müller
> <t.i.m at zen.co.uk>
> > wrote:
> >
> > From: Tim-Philipp Müller <t.i.m at zen.co.uk>
> > Subject: Re: Help with Gstreamer and RTSP
> with Axis
> > Camera
> > To: gstreamer-devel at lists.freedesktop.org
> > Date: Saturday, April 9, 2011, 10:49 AM
> >
> > On Fri, 2011-04-08 at 19:12 -0700, Tom
> Hendrick wrote:
> >
> > Hi,
> >
> > >
> > > As a quick test, I am (..) just trying the
> > following:
> > >
> > > Transmitter :
> > > -------------------
> > > gst-launch rtspsrc
> >
> location=rtsp://192.168.0.90/mpeg4/media.amp !
> > > filesink=txcap.ts
> > >
> > > I let this run for 20 seconds and control
> ^C out of
> > it.
> > >
> > > Receiver:
> > > -------------
> > > gst-launch playbin uri=file://txcap.ts
> > >
> > >
> > > The problem is that when I run the
> gst-launch
> > playbin=file://txcap.ts
> > > the video file plays very fast and then
> closes. The
> > quality also
> > > doesn't look as good as when I use "vlc
> > > rtsp://192.168.0.90/mpeg4/media.amp"
> > >
> > > I'm a beginner with gstreamer so I'm not
> sure how to
> > modify the
> > > transmit and receive command lines to
> properly set
> > the frame rate,
> > > codec, etc. Also another problem is that
> I want to
> > see this live on
> > > the receiver, so setting gstreamer to run
> for a
> > specified amount of
> > > time so that the header is written
> properly will not
> > allow me to see
> > > this real-time on the receive side. Any
> > suggestions?
> > >
> >
> > This works I presume:
> >
> > gst-launch-0.10 playbin2
> > uri=rtsp://192.168.0.90/mpeg4/media.amp
> >
> > ?
> >
> > Note that rtspsrc outputs RTP packets, which
> you need
> > to depayload using
> > an appropriate depayloader (rtpmp2tdepay?
> > rtpmp4gdepay? rtpmp4vdepay?).
> >
> > Writing RTP packets to file like you do now
> is not
> > going to work.
> >
> > Cheers
> > -Tim
> >
> >
> _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> >
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> >
> >
> > -----Inline Attachment Follows-----
> >
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> >
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> >
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> >
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
>
_______________________________________________
gstreamer-devel mailing list
gstreamer-devel at lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110409/ec753da4/attachment-0001.htm>
More information about the gstreamer-devel
mailing list