update of PIPELINE Duration for DVB Streams

[arnaud tonda]

Hi,

could you please create another mail for your specific problem?

if subjects are mixed, it's not so easy to answer.

For your problem, i don't use gstreamer for dvb tuning, i can't answer.
but tuning channels, if you have a good scan is not realy hard.

2011/8/16 J Mrazek <jaromrax at gmail.com>

> Hi all,
>  I am quite new to gstreamer, but I can see its powers. However, I am
> not able to
> tune a specific channel from dvb usb-dongle. In fact, I have already
> managed
> to see one channel, but I am completely lost with switching channels.
> I have a clue in my  ~/.mplayer/channels.conf, but no idea how to
> translate to gst.
> Thanks for hints...
>
> jaromir
>
>
>
> CT1:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:257:273:257
>
> CT2:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:513:529:258
>
> CT24:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:769:785:259
>
> CT4:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1025:1041:260
>
> NOVA:634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:101:111:513
>
> NOVACINEMA:634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:401:411:514
>
> PRIMA:634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:201:211:769
>
> BARRANDOV:634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:301:311:2049
>
> PCOOL:634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:501:511:770
>
> On Mon, Jul 25, 2011 at 7:16 PM, arnaud tonda <arnaud.tonda at gmail.com>
> wrote:
> > Hi everybody,
> >
> > is there any way to force Gstreamer pipeline to update is duration?
> > i know that a message Bus exist GST_MESSAGE_DURATION but is never called.
> >
> > in fact i have some DVB TS streams that are recorded from a dvb card
> > and stored on the local hard drive.
> >
> > when it is a finished record no problem, the duration is right.
> > But when i try to play the stream when it is currently recording the
> > duration is good at start but is never updated.
> > is there any way to do this, or if it is not possible what is the aim
> > of GST_MESSAGE_DURATION?
> >
> > Best regards
> >
> > Arnaud Tonda
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> >
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>



-- 
Arnaud Tonda

téléphone : 06 34 23 57 78
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110816/f6f44d28/attachment.html>