AAC not played - No Sound output

Sudarshan Bisht bisht.sudarshan at gmail.com
Mon Jul 25 06:41:16 PDT 2011 

Did you try dumping PCM samples to a file using filesink and playing through
some tool ? If that plays that means at least the data what you are getting
out of decoder plugin is correct.
It may be possible that you need audioconvert/audioresample before alsasink.



On Mon, Jul 25, 2011 at 3:51 PM, Ashwini Sharma <ak.ashwini at gmail.com>wrote:

> Hi All,
>
>   I am adding the ADTS header infront of the raw AAC frame and decoding it.
>
> Now I see that the frames are being written to Alsasink, but there is no
> sound output actually.
>
> The "*snd_pcm_writei*" function in "*gst_alsasink_write*" returns same
> number as input. Can someone point me in the right direction to get the
> Audio output.
>
> Regards,
> Ashwini
>
> On Fri, Jul 22, 2011 at 11:07 AM, Balakrishnan Natarajan <
> balakrishnan.2005 at gmail.com> wrote:
>
>> The Elementary AAC can be playable only if it contains ADTS header.
>>
>> So verify if your demuxer gives you the Elementary AAC stream with ADTS
>> header.
>>
>> You can verify this by playing with tools like foobar or winamp.
>>
>> Once you have verified this may be you need to aacparse plugin to extract
>> the ADTS header and pass it to the ffdec_aac plugin
>> through the codec-data caps field while negotiation.
>>
>> Regards
>> Bala
>>
>>
>>
>>
>> On Thu, Jul 21, 2011 at 11:44 AM, <
>> gstreamer-devel-request at lists.freedesktop.org> wrote:
>>
>>> Send gstreamer-devel mailing list submissions to
>>>
>>>        gstreamer-devel at lists.freedesktop.org
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>
>>>        http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> or, via email, send a message with subject or body 'help' to
>>>        gstreamer-devel-request at lists.freedesktop.org
>>>
>>> You can reach the person managing the list at
>>>        gstreamer-devel-owner at lists.freedesktop.org
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of gstreamer-devel digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>>   1. Re: AAC not played - Error from decoder (ffdec_aac)
>>>      (Sudarshan Bisht)
>>>   2. Re: AAC not played - Error from decoder (ffdec_aac)
>>>      (Sudarshan Bisht)
>>>   3. Re: AAC not played - Error from decoder (ffdec_aac)
>>>      (Ashwini Sharma)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Thu, 21 Jul 2011 08:23:47 +0300
>>> From: Sudarshan Bisht <bisht.sudarshan at gmail.com>
>>> Subject: Re: AAC not played - Error from decoder (ffdec_aac)
>>> To: Discussion of the development of and with GStreamer
>>>
>>>        <gstreamer-devel at lists.freedesktop.org>
>>> Message-ID:
>>>        <CACdEgVYk7woyv+sO3DQcu3W86EkysYwoY60HhX=Rm6TA=
>>> QFeeA at mail.gmail.com>
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>>
>>> Yes you can insert missing header to raw aac data by writing your own
>>> plugin, and place it before decoder plugin.  But you need to have certain
>>> information for header e.g. sampling frequency, channels, profile etc ,
>>> and
>>> all this you suppose to get from demuxer.
>>>
>>>
>>>
>>>
>>> On Thu, Jul 21, 2011 at 7:43 AM, Ashwini Sharma <ak.ashwini at gmail.com
>>> >wrote:
>>>
>>> > HI Sudarshan,
>>> >
>>> > Adding aacparse didn't help. I get the parse error from aacparse.
>>> >
>>> > In my case, the file is read and demuxed by an application, which then
>>> > gives the audio stream data to my pipeline (which consists of aapsrc !
>>> > decoder ! alsasink ) for decoding and rendering.
>>> >
>>> > I am able to play ac3 and mp3. But AAC i am having failure still. I
>>> tried
>>> > your inputs, but to no results.
>>> >
>>> > Can't there be case that we provide the missing header data to
>>> ffdec_aac
>>> > thru some means..... any inputs please.
>>> >
>>> > Rgds,
>>> > Ashwini
>>> >
>>> > On Wed, Jul 20, 2011 at 8:19 PM, Sudarshan Bisht <
>>> > bisht.sudarshan at gmail.com> wrote:
>>> >
>>> >> If you want to play it dynamically then you don't need to mux it
>>> again,
>>> >> maybe you can use aacparse between demuxer and aac decoder plugin.
>>> >>
>>> >>
>>> >>
>>> >> On Wed, Jul 20, 2011 at 4:06 PM, Ashwini Sharma <ak.ashwini at gmail.com
>>> >wrote:
>>> >>
>>> >>> Hi Sudarshan,
>>> >>>
>>> >>> Thanks for your input.
>>> >>>
>>> >>> Can I play the AAC data dynamically, as suggested by you, instead of
>>> >>> saving it into file.
>>> >>>
>>> >>> Like mux the incoming AAC data buffer and then decode it at the same
>>> >>> time?
>>> >>>
>>> >>> rgds,
>>> >>> -Ashwini
>>> >>>
>>> >>>
>>> >>>
>>> >>> On Wed, Jul 20, 2011 at 5:59 PM, Sudarshan Bisht <
>>> >>> bisht.sudarshan at gmail.com> wrote:
>>> >>>
>>> >>>>
>>> >>>> Demuxer outputs raw aac data, it does not have any header(ADIF/ADTS)
>>> >>>> thats why you get that error message.
>>> >>>>
>>> >>>> To get the correct playable file, you again need to mux this raw aac
>>> >>>> data using qtmux and then you get .m4a file.   And to play this .m4a
>>> file
>>> >>>> you need to have qtdemux in your pipeline if you don't use
>>> >>>> decodebin2/playbin2.
>>> >>>>
>>> >>>> I hope this will help you.
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>   On Wed, Jul 20, 2011 at 1:52 PM, Ashwini Sharma <
>>> ak.ashwini at gmail.com
>>> >>>> > wrote:
>>> >>>>
>>> >>>>>   Hi All,
>>> >>>>>
>>> >>>>> I have a demuxed audio stream (AAC encoded). When I try to play, i
>>> get
>>> >>>>> an error "FFMpeg can not decode AAC data"
>>> >>>>>
>>> >>>>> The details are as follows:
>>> >>>>>
>>> >>>>> I have a video file which contain mpeg4 video and AAC audio. I
>>> Demux
>>> >>>>> the file into Audio and video files. When i play the demuxed audio
>>> it fails.
>>> >>>>>
>>> >>>>> But when i reapeat the same test for AC3 or MP3 audios, it works
>>> fine.
>>> >>>>>
>>> >>>>>
>>> >>>>> I think there is some mistake on my part when playing the AAC file.
>>> >>>>> Someone please provide your inputs in getting it to play.
>>> >>>>>
>>> >>>>> Any help is greatly appreciated.
>>> >>>>>
>>> >>>>> -Ashwini
>>> >>>>>
>>> >>>>> _______________________________________________
>>> >>>>> gstreamer-devel mailing list
>>> >>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>
>>> >>>>>
>>> >>>>
>>> >>>>
>>> >>>> --
>>> >>>> Regards,
>>> >>>>
>>> >>>> Sudarshan Bisht
>>> >>>>
>>> >>>> _______________________________________________
>>> >>>> gstreamer-devel mailing list
>>> >>>> gstreamer-devel at lists.freedesktop.org
>>> >>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>
>>> >>>>
>>> >>>
>>> >>> _______________________________________________
>>> >>> gstreamer-devel mailing list
>>> >>> gstreamer-devel at lists.freedesktop.org
>>> >>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>
>>> >>>
>>> >>
>>> >>
>>> >> --
>>> >> Regards,
>>> >>
>>> >> Sudarshan Bisht
>>> >>
>>> >> _______________________________________________
>>> >> gstreamer-devel mailing list
>>> >> gstreamer-devel at lists.freedesktop.org
>>> >> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>
>>> >>
>>> >
>>> > _______________________________________________
>>> > gstreamer-devel mailing list
>>> > gstreamer-devel at lists.freedesktop.org
>>> > http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >
>>> >
>>>
>>>
>>> --
>>> Regards,
>>>
>>> Sudarshan Bisht
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>>> http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110721/a85c1666/attachment-0001.html
>>> >
>>>
>>> ------------------------------
>>>
>>> Message: 2
>>> Date: Thu, 21 Jul 2011 09:09:18 +0300
>>> From: Sudarshan Bisht <bisht.sudarshan at gmail.com>
>>> Subject: Re: AAC not played - Error from decoder (ffdec_aac)
>>> To: Discussion of the development of and with GStreamer
>>>
>>>        <gstreamer-devel at lists.freedesktop.org>
>>> Message-ID:
>>>        <CACdEgVbocRsfvXpG+ZO2sBODaLoouU3a=
>>> jiKU4ffWj_Ouq-3pQ at mail.gmail.com>
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>>
>>> Or you can do same in your application also, then no need to write a
>>> plugin.
>>>
>>>
>>>
>>> On Thu, Jul 21, 2011 at 8:23 AM, Sudarshan Bisht
>>> <bisht.sudarshan at gmail.com>wrote:
>>>
>>> > Yes you can insert missing header to raw aac data by writing your own
>>> > plugin, and place it before decoder plugin.  But you need to have
>>> certain
>>> > information for header e.g. sampling frequency, channels, profile etc ,
>>> and
>>> > all this you suppose to get from demuxer.
>>> >
>>> >
>>> >
>>> >
>>> > On Thu, Jul 21, 2011 at 7:43 AM, Ashwini Sharma <ak.ashwini at gmail.com
>>> >wrote:
>>> >
>>> >> HI Sudarshan,
>>> >>
>>> >> Adding aacparse didn't help. I get the parse error from aacparse.
>>> >>
>>> >> In my case, the file is read and demuxed by an application, which then
>>> >> gives the audio stream data to my pipeline (which consists of aapsrc !
>>> >> decoder ! alsasink ) for decoding and rendering.
>>> >>
>>> >> I am able to play ac3 and mp3. But AAC i am having failure still. I
>>> tried
>>> >> your inputs, but to no results.
>>> >>
>>> >> Can't there be case that we provide the missing header data to
>>> ffdec_aac
>>> >> thru some means..... any inputs please.
>>> >>
>>> >> Rgds,
>>> >> Ashwini
>>> >>
>>> >> On Wed, Jul 20, 2011 at 8:19 PM, Sudarshan Bisht <
>>> >> bisht.sudarshan at gmail.com> wrote:
>>> >>
>>> >>> If you want to play it dynamically then you don't need to mux it
>>> again,
>>> >>> maybe you can use aacparse between demuxer and aac decoder plugin.
>>> >>>
>>> >>>
>>> >>>
>>> >>> On Wed, Jul 20, 2011 at 4:06 PM, Ashwini Sharma <
>>> ak.ashwini at gmail.com>wrote:
>>> >>>
>>> >>>> Hi Sudarshan,
>>> >>>>
>>> >>>> Thanks for your input.
>>> >>>>
>>> >>>> Can I play the AAC data dynamically, as suggested by you, instead of
>>> >>>> saving it into file.
>>> >>>>
>>> >>>> Like mux the incoming AAC data buffer and then decode it at the same
>>> >>>> time?
>>> >>>>
>>> >>>> rgds,
>>> >>>> -Ashwini
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> On Wed, Jul 20, 2011 at 5:59 PM, Sudarshan Bisht <
>>> >>>> bisht.sudarshan at gmail.com> wrote:
>>> >>>>
>>> >>>>>
>>> >>>>> Demuxer outputs raw aac data, it does not have any
>>> header(ADIF/ADTS)
>>> >>>>> thats why you get that error message.
>>> >>>>>
>>> >>>>> To get the correct playable file, you again need to mux this raw
>>> aac
>>> >>>>> data using qtmux and then you get .m4a file.   And to play this
>>> .m4a file
>>> >>>>> you need to have qtdemux in your pipeline if you don't use
>>> >>>>> decodebin2/playbin2.
>>> >>>>>
>>> >>>>> I hope this will help you.
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>>   On Wed, Jul 20, 2011 at 1:52 PM, Ashwini Sharma <
>>> >>>>> ak.ashwini at gmail.com> wrote:
>>> >>>>>
>>> >>>>>>   Hi All,
>>> >>>>>>
>>> >>>>>> I have a demuxed audio stream (AAC encoded). When I try to play, i
>>> get
>>> >>>>>> an error "FFMpeg can not decode AAC data"
>>> >>>>>>
>>> >>>>>> The details are as follows:
>>> >>>>>>
>>> >>>>>> I have a video file which contain mpeg4 video and AAC audio. I
>>> Demux
>>> >>>>>> the file into Audio and video files. When i play the demuxed audio
>>> it fails.
>>> >>>>>>
>>> >>>>>> But when i reapeat the same test for AC3 or MP3 audios, it works
>>> fine.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> I think there is some mistake on my part when playing the AAC
>>> file.
>>> >>>>>> Someone please provide your inputs in getting it to play.
>>> >>>>>>
>>> >>>>>> Any help is greatly appreciated.
>>> >>>>>>
>>> >>>>>> -Ashwini
>>> >>>>>>
>>> >>>>>> _______________________________________________
>>> >>>>>> gstreamer-devel mailing list
>>> >>>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>>
>>> >>>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>> --
>>> >>>>> Regards,
>>> >>>>>
>>> >>>>> Sudarshan Bisht
>>> >>>>>
>>> >>>>> _______________________________________________
>>> >>>>> gstreamer-devel mailing list
>>> >>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>
>>> >>>>>
>>> >>>>
>>> >>>> _______________________________________________
>>> >>>> gstreamer-devel mailing list
>>> >>>> gstreamer-devel at lists.freedesktop.org
>>> >>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>
>>> >>>>
>>> >>>
>>> >>>
>>> >>> --
>>> >>> Regards,
>>> >>>
>>> >>> Sudarshan Bisht
>>> >>>
>>> >>> _______________________________________________
>>> >>> gstreamer-devel mailing list
>>> >>> gstreamer-devel at lists.freedesktop.org
>>> >>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>
>>> >>>
>>> >>
>>> >> _______________________________________________
>>> >> gstreamer-devel mailing list
>>> >> gstreamer-devel at lists.freedesktop.org
>>> >> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>
>>> >>
>>> >
>>> >
>>> > --
>>> > Regards,
>>> >
>>> > Sudarshan Bisht
>>> >
>>>
>>>
>>>
>>> --
>>> Regards,
>>>
>>> Sudarshan Bisht
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>>> http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110721/b84ec3ee/attachment-0001.htm
>>> >
>>>
>>> ------------------------------
>>>
>>> Message: 3
>>> Date: Thu, 21 Jul 2011 11:44:37 +0530
>>> From: Ashwini Sharma <ak.ashwini at gmail.com>
>>> Subject: Re: AAC not played - Error from decoder (ffdec_aac)
>>> To: Discussion of the development of and with GStreamer
>>>
>>>        <gstreamer-devel at lists.freedesktop.org>
>>> Message-ID:
>>>        <
>>> CAO7aZcewG58jLm1TKRK_rDki01cUfH_hAqAe0qEu9q2OB+qs8g at mail.gmail.com>
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>>
>>> Hi,
>>>
>>> Can you please tell me how to contruct the header from the given data,
>>> i.e.
>>> sampling frequency, channels, profile etc
>>>
>>> Thanks,
>>> Ashwini
>>>
>>> On Thu, Jul 21, 2011 at 11:39 AM, Sudarshan Bisht <
>>> bisht.sudarshan at gmail.com
>>> > wrote:
>>>
>>> > Or you can do same in your application also, then no need to write a
>>> > plugin.
>>> >
>>> >
>>> >
>>> > On Thu, Jul 21, 2011 at 8:23 AM, Sudarshan Bisht <
>>> > bisht.sudarshan at gmail.com> wrote:
>>> >
>>> >> Yes you can insert missing header to raw aac data by writing your own
>>> >> plugin, and place it before decoder plugin.  But you need to have
>>> certain
>>> >> information for header e.g. sampling frequency, channels, profile etc
>>> , and
>>> >> all this you suppose to get from demuxer.
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> On Thu, Jul 21, 2011 at 7:43 AM, Ashwini Sharma <ak.ashwini at gmail.com
>>> >wrote:
>>> >>
>>> >>> HI Sudarshan,
>>> >>>
>>> >>> Adding aacparse didn't help. I get the parse error from aacparse.
>>> >>>
>>> >>> In my case, the file is read and demuxed by an application, which
>>> then
>>> >>> gives the audio stream data to my pipeline (which consists of aapsrc
>>> !
>>> >>> decoder ! alsasink ) for decoding and rendering.
>>> >>>
>>> >>> I am able to play ac3 and mp3. But AAC i am having failure still. I
>>> tried
>>> >>> your inputs, but to no results.
>>> >>>
>>> >>> Can't there be case that we provide the missing header data to
>>> ffdec_aac
>>> >>> thru some means..... any inputs please.
>>> >>>
>>> >>> Rgds,
>>> >>> Ashwini
>>> >>>
>>> >>>   On Wed, Jul 20, 2011 at 8:19 PM, Sudarshan Bisht <
>>> >>> bisht.sudarshan at gmail.com> wrote:
>>> >>>
>>> >>>> If you want to play it dynamically then you don't need to mux it
>>> again,
>>> >>>> maybe you can use aacparse between demuxer and aac decoder plugin.
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> On Wed, Jul 20, 2011 at 4:06 PM, Ashwini Sharma <
>>> ak.ashwini at gmail.com>wrote:
>>> >>>>
>>> >>>>> Hi Sudarshan,
>>> >>>>>
>>> >>>>> Thanks for your input.
>>> >>>>>
>>> >>>>> Can I play the AAC data dynamically, as suggested by you, instead
>>> of
>>> >>>>> saving it into file.
>>> >>>>>
>>> >>>>> Like mux the incoming AAC data buffer and then decode it at the
>>> same
>>> >>>>> time?
>>> >>>>>
>>> >>>>> rgds,
>>> >>>>> -Ashwini
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>> On Wed, Jul 20, 2011 at 5:59 PM, Sudarshan Bisht <
>>> >>>>> bisht.sudarshan at gmail.com> wrote:
>>> >>>>>
>>> >>>>>>
>>> >>>>>> Demuxer outputs raw aac data, it does not have any
>>> header(ADIF/ADTS)
>>> >>>>>> thats why you get that error message.
>>> >>>>>>
>>> >>>>>> To get the correct playable file, you again need to mux this raw
>>> aac
>>> >>>>>> data using qtmux and then you get .m4a file.   And to play this
>>> .m4a file
>>> >>>>>> you need to have qtdemux in your pipeline if you don't use
>>> >>>>>> decodebin2/playbin2.
>>> >>>>>>
>>> >>>>>> I hope this will help you.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>>
>>> >>>>>>
>>> >>>>>>   On Wed, Jul 20, 2011 at 1:52 PM, Ashwini Sharma <
>>> >>>>>> ak.ashwini at gmail.com> wrote:
>>> >>>>>>
>>> >>>>>>>   Hi All,
>>> >>>>>>>
>>> >>>>>>> I have a demuxed audio stream (AAC encoded). When I try to play,
>>> i
>>> >>>>>>> get an error "FFMpeg can not decode AAC data"
>>> >>>>>>>
>>> >>>>>>> The details are as follows:
>>> >>>>>>>
>>> >>>>>>> I have a video file which contain mpeg4 video and AAC audio. I
>>> Demux
>>> >>>>>>> the file into Audio and video files. When i play the demuxed
>>> audio it fails.
>>> >>>>>>>
>>> >>>>>>> But when i reapeat the same test for AC3 or MP3 audios, it works
>>> >>>>>>> fine.
>>> >>>>>>>
>>> >>>>>>>
>>> >>>>>>> I think there is some mistake on my part when playing the AAC
>>> file.
>>> >>>>>>> Someone please provide your inputs in getting it to play.
>>> >>>>>>>
>>> >>>>>>> Any help is greatly appreciated.
>>> >>>>>>>
>>> >>>>>>> -Ashwini
>>> >>>>>>>
>>> >>>>>>> _______________________________________________
>>> >>>>>>> gstreamer-devel mailing list
>>> >>>>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>>>
>>> >>>>>>>
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> --
>>> >>>>>> Regards,
>>> >>>>>>
>>> >>>>>> Sudarshan Bisht
>>> >>>>>>
>>> >>>>>> _______________________________________________
>>> >>>>>> gstreamer-devel mailing list
>>> >>>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>>
>>> >>>>>>
>>> >>>>>
>>> >>>>> _______________________________________________
>>> >>>>> gstreamer-devel mailing list
>>> >>>>> gstreamer-devel at lists.freedesktop.org
>>> >>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>>
>>> >>>>>
>>> >>>>
>>> >>>>
>>> >>>> --
>>> >>>> Regards,
>>> >>>>
>>> >>>> Sudarshan Bisht
>>> >>>>
>>> >>>> _______________________________________________
>>> >>>> gstreamer-devel mailing list
>>> >>>> gstreamer-devel at lists.freedesktop.org
>>> >>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>>
>>> >>>>
>>> >>>
>>> >>> _______________________________________________
>>> >>> gstreamer-devel mailing list
>>> >>> gstreamer-devel at lists.freedesktop.org
>>> >>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >>>
>>> >>>
>>> >>
>>> >>
>>> >> --
>>> >> Regards,
>>> >>
>>> >> Sudarshan Bisht
>>> >>
>>> >
>>> >
>>> >
>>> > --
>>> > Regards,
>>> >
>>> > Sudarshan Bisht
>>> >
>>> > _______________________________________________
>>> > gstreamer-devel mailing list
>>> > gstreamer-devel at lists.freedesktop.org
>>> > http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>> >
>>> >
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>>> http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110721/ad4b4e23/attachment.htm
>>> >
>>>
>>> ------------------------------
>>>
>>>
>>> _______________________________________________
>>> gstreamer-devel mailing list
>>> gstreamer-devel at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>
>>>
>>> End of gstreamer-devel Digest, Vol 6, Issue 50
>>> **********************************************
>>>
>>
>>
>>
>> --
>> - bala
>>
>> _______________________________________________
>> gstreamer-devel mailing list
>> gstreamer-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>
>>
>
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
>


-- 
Regards,

Sudarshan Bisht
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20110725/b1100f02/attachment-0001.htm>

More information about the gstreamer-devel mailing list