udpsink issue on Windows

Wed May 4 03:09:40 PDT 2011

no. unfortunately it seems all network related code in gstreamer on
windows has problems:-(((

On Wed, May 4, 2011 at 11:40, Alejandro Caires <ajdafonte at gmail.com> wrote:
> I've searching in the web and I found that this problem could be related
> with the IPv6 in Windows. Anyone can confirm that?
>
> On 1 May 2011 13:39, Alejandro Caires <ajdafonte at gmail.com> wrote:
>>
>> I already do the test and contrary to what I thought, setting the
>> localhost ip in the host property the delay also happens.
>>
>> On 29 April 2011 10:57, Alejandro Caires <ajdafonte at gmail.com> wrote:
>>>
>>> Responses in-line
>>>
>>> On 28 April 2011 23:42, Donny Viszneki <donny.viszneki at gmail.com> wrote:
>>>>
>>>> Do you experience the delay if your client and server are on the same
>>>> system and you use the loopback address?
>>>
>>> I think that setting the localhost ip in the host property the delay
>>> doesn't happen, But I'll test to confirm that.
>>>
>>>>
>>>> What is the MSWindows
>>>> equivalent of strace/truss?
>>>
>>> I am not very familiar with that kind of tools, but I did a little search
>>> in the web and I found this tool:
>>>
>>> http://www.intellectualheaven.com/default.asp?BH=projects&H=strace.htm
>>>
>>>>
>>>> On Thu, Apr 28, 2011 at 6:28 PM, Alejandro Caires <ajdafonte at gmail.com>
>>>> wrote:
>>>> > Ah ok ok. I understand and thanks for the help but the elements
>>>> > suggested
>>>> > can't help me to send rtp over the network :(
>>>> > On 28 April 2011 17:47, sumit kumar <sumit.git at gmail.com> wrote:
>>>> >>
>>>> >> i had worked on it long back..and had used directsoundsrc instead of
>>>> >> autoaudiosrc and directsoundsink instead of autoaudiosink with sync
>>>> >> propety
>>>> >> set to false for sink element...
>>>> >>
>>>> >> On Thu, Apr 28, 2011 at 8:17 PM, Alejandro Caires
>>>> >> <ajdafonte at gmail.com>
>>>> >> wrote:
>>>> >>>
>>>> >>> It happens the same :(
>>>> >>>
>>>> >>> Btw, what's the difference between changing autoaudiosrc for
>>>> >>> directsoundsrc in this particular case?
>>>> >>>
>>>> >>> On 28 April 2011 14:10, sumit kumar <sumit.git at gmail.com> wrote:
>>>> >>>>
>>>> >>>> Please give a try with directsoundsrc...
>>>> >>>>
>>>> >>>> On Thu, Apr 28, 2011 at 3:36 PM, Alejandro Caires
>>>> >>>> <ajdafonte at gmail.com>
>>>> >>>> wrote:
>>>> >>>>>
>>>> >>>>> Hi,
>>>> >>>>>
>>>> >>>>> First of all I want to congratulate the work done in this library.
>>>> >>>>>
>>>> >>>>> I'm using gstreamer in Windows and I have the following problem:
>>>> >>>>>
>>>> >>>>> When I execute the following instruction:
>>>> >>>>> gst-launch.exe gstrtpbin name=rtpbin autoaudiosrc ! alawenc !
>>>> >>>>> rtppcmapay
>>>> >>>>> max-ptime=20000000 timestamp-offset=0 ! udpsink port=<portDest>
>>>> >>>>> host=<ipDest>
>>>> >>>>>
>>>> >>>>> takes about 10-12 seconds to execute it.
>>>> >>>>>
>>>> >>>>> This delay happens in the following scenarios:
>>>> >>>>>
>>>> >>>>> - When the user with a "send pipeline" connect the PC and perform
>>>> >>>>> the test, the pipeline took about 10-12 seconds to be started;
>>>> >>>>>
>>>> >>>>> - For example, imagine that you try to do the test at 2 p.m. and
>>>> >>>>> it
>>>> >>>>> doesn't has delay, then wait 20 minutes (approx.) and try to do
>>>> >>>>> the
>>>> >>>>> test again. In this case, the delay of 10-12 seconds always
>>>> >>>>> happen.
>>>> >>>>>
>>>> >>>>> Taking into account this situation, I've been done more testing
>>>> >>>>> and I
>>>> >>>>> noted the following (I'm using Gstreamer-Java to perform this
>>>> >>>>> test):
>>>> >>>>>
>>>> >>>>> When I want to send rtp over the network I use the udpsink Element
>>>> >>>>> as
>>>> >>>>> follows:
>>>> >>>>>
>>>> >>>>> Element rtpsink = ElementFactory.make("udpsink", "rtpsink");
>>>> >>>>> rtpsink.set("port", "4000");
>>>> >>>>> rtpsink.set("host", "192.168.2.8");
>>>> >>>>>
>>>> >>>>> And I noted that (sometimes) executing these instructions takes
>>>> >>>>> about
>>>> >>>>> 10-12 seconds to
>>>> >>>>> execute them. In other words, the same that happens executing the
>>>> >>>>> pipeline described above.
>>>> >>>>>
>>>> >>>>> For all I have been describing and after some help of the guys of
>>>> >>>>> OSSBuild project, I noted that the udpsink element has some issues
>>>> >>>>> on
>>>> >>>>> Windows.
>>>> >>>>>
>>>> >>>>> So, I've searched in this mailing list to know more info about
>>>> >>>>> this
>>>> >>>>> question and I found the following posts:
>>>> >>>>>
>>>> >>>>> https://bugzilla.gnome.org/show_bug.cgi?id=534243
>>>> >>>>> https://bugzilla.gnome.org/show_bug.cgi?id=604870
>>>> >>>>>
>>>> >>>>> After all that has been described previously, I would like to know
>>>> >>>>> if
>>>> >>>>> someone can help me about this issue. Is already resolved? If
>>>> >>>>> there's an
>>>> >>>>> alternative element that I can use instead of udpsink?
>>>> >>>>>
>>>> >>>>> Best regards
>>>> >>>>>
>>>> >>>>>
>>>> >>>>>
>>>> >>>>> --
>>>> >>>>> Alejandro Caires
>>>> >>>>>
>>>> >>>>> _______________________________________________
>>>> >>>>> gstreamer-devel mailing list
>>>> >>>>> gstreamer-devel at lists.freedesktop.org
>>>> >>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>> >>>>>
>>>> >>>>
>>>> >>>>
>>>> >>>> _______________________________________________
>>>> >>>> gstreamer-devel mailing list
>>>> >>>> gstreamer-devel at lists.freedesktop.org
>>>> >>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>> >>>>
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> --
>>>> >>> Alejandro Caires
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> gstreamer-devel mailing list
>>>> >>> gstreamer-devel at lists.freedesktop.org
>>>> >>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>> >>>
>>>> >>
>>>> >>
>>>> >> _______________________________________________
>>>> >> gstreamer-devel mailing list
>>>> >> gstreamer-devel at lists.freedesktop.org
>>>> >> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Alejandro Caires
>>>> >
>>>> > _______________________________________________
>>>> > gstreamer-devel mailing list
>>>> > gstreamer-devel at lists.freedesktop.org
>>>> > http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>> >
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> http://codebad.com/
>>>> _______________________________________________
>>>> gstreamer-devel mailing list
>>>> gstreamer-devel at lists.freedesktop.org
>>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>
>>>
>>>
>>> --
>>> Alejandro Caires
>>
>>
>>
>> --
>> Alejandro Caires
>
>
>
> --
> Alejandro Caires
>
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
>

-- 
  Levente                               "Si vis pacem para bellum!"