problem generating RTP packets

[Krzysztof Konopko]

Hi Chuck,

What do you mean by "doesn't work"?
Do you mean you can't receive packets?

Check the firewall rules on the destination host and make sure you use
proper capabilities on the receiver side.

Kris

On 07/12/12 14:22, Chuck Crisler wrote:
> I am trying to send video packets out onto the network using the following
> pipeline. It runs without error but doesn't work. I have captured a
> wireshark trace and the size of the RTP packets is usually 56 bytes, though
> sometimes 60 bytes. Whichever size it is consistent through out the
> session. I am using good plugins v. 0.10.23. Any ideas?
> 
> Thank you,
> Chuck Crisler
> 
> #!/bin/sh
> 
> gst-launch-0.10 v4l2src device=/dev/video0 always-copy=false !
> 'video/x-raw-yuv,width=640,height=480' ! x264enc pass=qual quantizer=30
> bitrate=256 ! video/x-h264 ! rtph264pay pt=96 mtu=1400 ! udpsink
> host=192.168.10.212 port=9000
> 
> 
> 
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>