Running "pulseaudio" and "alsa" together.
Ajay Garg
ajaygargnsit at gmail.com
Sat Jun 2 08:27:20 PDT 2012
Damn.. plain-text formatting seems to make the output difficult to read.
Sean, please let me know if I should re-post the outputs of the previous
mail, in rich-formatting.
Regards,
Ajay
On Sat, Jun 2, 2012 at 8:30 PM, Ajay Garg <ajaygargnsit at gmail.com> wrote:
> Thanks Sean, for the prompt, detailed, extremely useful reply :)
> I am grateful :)
>
> a)
> Yes, XO-1 runs Fedora-14.
>
>
>
>
>
> b)
> Well, OLPC-Sugar does do some customizations in the default image, so
> it might be possible that gstreamer-plugins-good has "libgstpulse.so"
> missing. (However, it is unlikely).
>
> Anyhow, I will try this out again with a clean install.
>
>
>
>
>
> c)
> Following is the output of "gst-launch-0.10 -v audiotestsrc ! volume
> volume=0.4 ! audioconvert ! pulsesink" from XO-1 (seems ok to me) ::
>
>
> #################################################################################################
> [olpc at xo-05-2a-1f ~]$ gst-launch -v audiotestsrc ! volume volume=0.4 !
> audioconvert ! pulsesink
> Setting pipeline to PAUSED ...
> /GstPipeline:pipeline0/GstAudioTestSrc:audiotestsrc0.GstPad:src: caps
> = audio/x-raw-float, endianness=(int)1234, width=(int)64,
> rate=(int)44100, channels=(int)1
> Pipeline is PREROLLING ...
> /GstPipeline:pipeline0/GstVolume:volume0.GstPad:src: caps =
> audio/x-raw-float, endianness=(int)1234, width=(int)64,
> rate=(int)44100, channels=(int)1
> /GstPipeline:pipeline0/GstVolume:volume0.GstPad:sink: caps =
> audio/x-raw-float, endianness=(int)1234, width=(int)64,
> rate=(int)44100, channels=(int)1
> /GstPipeline:pipeline0/GstAudioConvert:audioconvert0.GstPad:src: caps
> = audio/x-raw-float, endianness=(int)1234, width=(int)32,
> rate=(int)44100, channels=(int)1
> /GstPipeline:pipeline0/GstAudioConvert:audioconvert0.GstPad:sink: caps
> = audio/x-raw-float, endianness=(int)1234, width=(int)64,
> rate=(int)44100, channels=(int)1
> /GstPipeline:pipeline0/GstPulseSink:pulsesink0.GstPad:sink: caps =
> audio/x-raw-float, endianness=(int)1234, width=(int)32,
> rate=(int)44100, channels=(int)1
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> /GstPipeline:pipeline0/GstPulseSink:pulsesink0: volume = 0.728985
> /GstPipeline:pipeline0/GstPulseSink:pulsesink0: mute = FALSE
> New clock: GstPulseSinkClock
>
> <therafter, the shell appears to hang; NO SOUND IS HEARD>
>
> #################################################################################################
>
>
>
>
>
>
> d)
> Following is the content of ~/log_test.txt, generated after running ::
>
> pulseaudio --kill
> sudo rm -r ~/.pulse
> sudo rm -r ~/.pulse-cookie
> pulseaudio --daemonize=false -vvv > ~/long_test.txt 2>&1
>
>
>
> ################################################################################################################
> I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
> I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
> D: core-rtclock.c: Timer slack is set to 50 us.
> D: core-util.c: RealtimeKit worked.
> I: core-util.c: Successfully gained nice level -11.
> I: main.c: This is PulseAudio 0.9.21
> D: main.c: Compilation host: i386-redhat-linux-gnu
> D: main.c: Compilation CFLAGS: -O2 -g -pipe -Wall
> -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
> --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom
> -fasynchronous-unwind-tables -Wall -W -Wextra -pipe -Wno-long-long
> -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations
> -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security
> -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition
> -Wpointer-arith -Winit-self -Wdeclaration-after-statement
> -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes
> -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow
> -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings
> -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common
> -fdiagnostics-show-option
> D: main.c: Running on host: Linux i586
> 2.6.35.13_xo1-20120508.1133.olpc.eb0c7a8 #1 PREEMPT Tue May 8 11:35:49
> EDT 2012
> D: main.c: Found 1 CPUs.
> I: main.c: Page size is 4096 bytes
> D: main.c: Compiled with Valgrind support: no
> D: main.c: Running in valgrind mode: no
> D: main.c: Running in VM: no
> D: main.c: Optimized build: yes
> D: main.c: All asserts enabled.
> I: main.c: Machine ID is f375255c3fa791ff0a40d9320000001a.
> I: main.c: Session ID is
> f375255c3fa791ff0a40d9320000001a-1338640583.186469-1399595420.
> I: main.c: Using runtime directory
> /home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-runtime.
> I: main.c: Using state directory /home/olpc/.pulse.
> I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules.
> I: main.c: Running in system mode: no
> I: main.c: Fresh high-resolution timers available! Bon appetit!
> I: cpu-x86.c: CPU flags: CMOV MMX MMXEXT 3DNOW 3DNOWEXT
> I: svolume_mmx.c: Initialising MMX optimized functions.
> I: remap_mmx.c: Initialising MMX optimized remappers.
> D: memblock.c: Using shared memory pool with 1024 slots of size 64.0
> KiB each, total size is 64.0 MiB, maximum usable slot size is 65496
> D: database-tdb.c: Opened TDB database
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-device-volumes.tdb'
> I: module-device-restore.c: Sucessfully opened database file
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-device-volumes'.
> I: module.c: Loaded "module-device-restore" (index: #0; argument: "").
> D: database-tdb.c: Opened TDB database
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-stream-volumes.tdb'
> I: module-stream-restore.c: Sucessfully opened database file
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-stream-volumes'.
> I: module.c: Loaded "module-stream-restore" (index: #1; argument: "").
> D: database-tdb.c: Opened TDB database
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-card-database.tdb'
> I: module-card-restore.c: Sucessfully opened database file
> '/home/olpc/.pulse/f375255c3fa791ff0a40d9320000001a-card-database'.
> I: module.c: Loaded "module-card-restore" (index: #2; argument: "").
> I: module.c: Loaded "module-augment-properties" (index: #3; argument: "").
> D: cli-command.c: Checking for existance of
> '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success
> D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
> D: module-udev-detect.c: /devices/pci0000:00/0000:00:0f.3/sound/card0
> is busy: no
> D: module-udev-detect.c: Loading module-alsa-card with arguments
> 'device_id="0" name="pci-0000_00_0f.3"
> card_name="alsa_card.pci-0000_00_0f.3" tsched=yes ignore_dB=no
> card_properties="module-udev-detect.discovered=1"'
> D: dbus-util.c: Successfully connected to D-Bus session bus
> 3b857d3912c26fe3727fe4cb00000026 as :1.33
> D: reserve-wrap.c: Successfully acquired reservation lock on device
> 'Audio0'
> D: alsa-mixer.c: Looking at profile output:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile
> output:analog-mono+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile output:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
> D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM front:0
> I: alsa-util.c: Error opening PCM device front:0: Invalid argument
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: Maximum hw buffer size is 371 ms
> D: alsa-util.c: Set buffer size first (to 4408 samples), period size
> second (to 1102 samples).
> D: alsa-mixer.c: Profile output:analog-stereo supported.
> D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-mono
> D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile
> output:analog-stereo+input:analog-stereo
> D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
> D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM front:0
> I: alsa-util.c: Error opening PCM device front:0: Invalid argument
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: Maximum hw buffer size is 371 ms
> D: alsa-util.c: Set buffer size first (to 4408 samples), period size
> second (to 1102 samples).
> D: alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo
> supported.
> D: alsa-mixer.c: Looking at profile
> output:analog-stereo+input:iec958-stereo
> D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-stereo+input:iec958-surround-40
> D: alsa-mixer.c: Checking for recording on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:analog-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.0
> (analog-surround-40)
> D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround40:0
> I: alsa-util.c: Error opening PCM device surround40:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-40+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.0
> (analog-surround-40)
> D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround40:0
> I: alsa-util.c: Error opening PCM device surround40:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-40+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.0
> (analog-surround-40)
> D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround40:0
> I: alsa-util.c: Error opening PCM device surround40:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-40+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.0
> (analog-surround-40)
> D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround40:0
> I: alsa-util.c: Error opening PCM device surround40:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-40+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.0
> (analog-surround-40)
> D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround40:0
> I: alsa-util.c: Error opening PCM device surround40:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:analog-surround-41
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.1
> (analog-surround-41)
> D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround41:0
> I: alsa-util.c: Error opening PCM device surround41:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-41+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.1
> (analog-surround-41)
> D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround41:0
> I: alsa-util.c: Error opening PCM device surround41:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-41+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.1
> (analog-surround-41)
> D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround41:0
> I: alsa-util.c: Error opening PCM device surround41:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-41+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.1
> (analog-surround-41)
> D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround41:0
> I: alsa-util.c: Error opening PCM device surround41:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-41+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 4.1
> (analog-surround-41)
> D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround41:0
> I: alsa-util.c: Error opening PCM device surround41:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:analog-surround-50
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.0
> (analog-surround-50)
> D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround50:0
> I: alsa-util.c: Error opening PCM device surround50:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-50+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.0
> (analog-surround-50)
> D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround50:0
> I: alsa-util.c: Error opening PCM device surround50:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-50+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.0
> (analog-surround-50)
> D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround50:0
> I: alsa-util.c: Error opening PCM device surround50:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-50+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.0
> (analog-surround-50)
> D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround50:0
> I: alsa-util.c: Error opening PCM device surround50:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-50+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.0
> (analog-surround-50)
> D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround50:0
> I: alsa-util.c: Error opening PCM device surround50:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:analog-surround-51
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.1
> (analog-surround-51)
> D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround51:0
> I: alsa-util.c: Error opening PCM device surround51:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-51+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.1
> (analog-surround-51)
> D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround51:0
> I: alsa-util.c: Error opening PCM device surround51:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-51+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.1
> (analog-surround-51)
> D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround51:0
> I: alsa-util.c: Error opening PCM device surround51:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-51+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.1
> (analog-surround-51)
> D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround51:0
> I: alsa-util.c: Error opening PCM device surround51:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-51+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 5.1
> (analog-surround-51)
> D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround51:0
> I: alsa-util.c: Error opening PCM device surround51:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:analog-surround-71
> D: alsa-mixer.c: Checking for playback on Analog Surround 7.1
> (analog-surround-71)
> D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround71:0
> I: alsa-util.c: Error opening PCM device surround71:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-71+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Analog Surround 7.1
> (analog-surround-71)
> D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround71:0
> I: alsa-util.c: Error opening PCM device surround71:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-71+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 7.1
> (analog-surround-71)
> D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround71:0
> I: alsa-util.c: Error opening PCM device surround71:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-71+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Analog Surround 7.1
> (analog-surround-71)
> D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround71:0
> I: alsa-util.c: Error opening PCM device surround71:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:analog-surround-71+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Analog Surround 7.1
> (analog-surround-71)
> D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM surround71:0
> I: alsa-util.c: Error opening PCM device surround71:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-stereo+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-stereo+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-stereo+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-surround-40+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-surround-40+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-surround-40+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:iec958-surround-40+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958/AC3) (iec958-ac3-surround-40)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-40+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958/AC3) (iec958-ac3-surround-40)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-40+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958/AC3) (iec958-ac3-surround-40)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-40+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958/AC3) (iec958-ac3-surround-40)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-40+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Surround 4.0
> (IEC958/AC3) (iec958-ac3-surround-40)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
> D: alsa-mixer.c: Checking for playback on Digital Surround 5.1
> (IEC958/AC3) (iec958-ac3-surround-51)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-51+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Digital Surround 5.1
> (IEC958/AC3) (iec958-ac3-surround-51)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-51+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 5.1
> (IEC958/AC3) (iec958-ac3-surround-51)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-51+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Surround 5.1
> (IEC958/AC3) (iec958-ac3-surround-51)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile
> output:iec958-ac3-surround-51+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Surround 5.1
> (IEC958/AC3) (iec958-ac3-surround-51)
> D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)pcm.c: Unknown PCM a52:0
> I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
> D: alsa-mixer.c: Looking at profile output:hdmi-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI)
> (hdmi-stereo)
> D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM hdmi:0
> I: alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-mono
> D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI)
> (hdmi-stereo)
> D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM hdmi:0
> I: alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI)
> (hdmi-stereo)
> D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM hdmi:0
> I: alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
> D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-stereo
> D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI)
> (hdmi-stereo)
> D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM hdmi:0
> I: alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
> D: alsa-mixer.c: Looking at profile
> output:hdmi-stereo+input:iec958-surround-40
> D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI)
> (hdmi-stereo)
> D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM hdmi:0
> I: alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
> D: alsa-mixer.c: Looking at profile input:analog-mono
> D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open plug:hw:0
> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid
> argument
> D: alsa-mixer.c: Looking at profile input:analog-stereo
> D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
> D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM front:0
> I: alsa-util.c: Error opening PCM device front:0: Invalid argument
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: Maximum hw buffer size is 371 ms
> D: alsa-util.c: Set buffer size first (to 4408 samples), period size
> second (to 1102 samples).
> D: alsa-mixer.c: Profile input:analog-stereo supported.
> D: alsa-mixer.c: Looking at profile input:iec958-stereo
> D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958)
> (iec958-stereo)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> D: alsa-mixer.c: Looking at profile input:iec958-surround-40
> D: alsa-mixer.c: Checking for recording on Digital Surround 4.0
> (IEC958) (iec958-surround-40)
> D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM iec958:0
> I: alsa-util.c: Error opening PCM device iec958:0: Invalid argument
> I: card.c: Created 0 "alsa_card.pci-0000_00_0f.3"
> D: reserve-wrap.c: Successfully create reservation lock monitor for
> device 'Audio0'
> D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM front:0
> I: alsa-util.c: Error opening PCM device front:0: Invalid argument
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: Maximum hw buffer size is 371 ms
> D: alsa-util.c: Set buffer size first (to 88200 samples), period size
> second (to 88200 samples).
> I: alsa-sink.c: Successfully opened device hw:0.
> I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
> I: alsa-sink.c: Successfully enabled mmap() mode.
> I: alsa-sink.c: Successfully enabled timer-based scheduling mode.
> I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
> D: alsa-mixer.c: Probing path 'analog-output'
> D: alsa-mixer.c: Probing path 'analog-output-speaker'
> D: alsa-mixer.c: Probe of element 'Speaker' failed.
> D: alsa-mixer.c: Probing path 'analog-output-speaker'
> D: alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
> D: alsa-mixer.c: Probing path 'analog-output-headphones'
> D: alsa-mixer.c: Probe of element 'Headphone' failed.
> D: alsa-mixer.c: Probing path 'analog-output-headphones'
> D: alsa-mixer.c: Probe of element 'Headphone2' failed.
> D: alsa-mixer.c: Probing path 'analog-output-mono'
> D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono'
> D: alsa-sink.c: Probed mixer paths:
> D: alsa-mixer.c: Path Set 0x960a090, direction=1, probed=yes
> D: alsa-mixer.c: Path analog-output (Analog Output), direction=1,
> priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes,
> has_dB=yes, min_volume=0, max_volume=31, min_dB=-139.5, max_dB=0
> D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Master Mono, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2,
> override_map=yes
> D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4900000000018,
> n_channels=1, override_map=yes
> D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1,
> override_map=yes
> D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4,
> volume=0, enumeration=0, required=0, required_absent=0, mask=0x0,
> n_channels=0, override_map=no
> D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1,
> priority=10
> D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier)
> index=0, priority=0
> D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
> D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
> D: alsa-mixer.c: Path analog-output-mono (Analog Mono Output),
> direction=1, priority=50, probed=yes, supported=yes, has_mute=yes,
> has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-93,
> max_dB=0
> D: alsa-mixer.c: Element Master, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2,
> override_map=no
> D: alsa-mixer.c: Element Master Mono, direction=1, switch=1, volume=1,
> enumeration=0, required=4, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=yes
> D: alsa-mixer.c: Element Surround, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2,
> override_map=no
> D: alsa-mixer.c: Element Center, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element LFE, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4,
> volume=0, enumeration=0, required=0, required_absent=0, mask=0x0,
> n_channels=0, override_map=no
> D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1,
> priority=10
> D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier)
> index=0, priority=0
> D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
> D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
> D: alsa-mixer.c: Path analog-output-lfe-on-mono (Analog Output (LFE)),
> direction=1, priority=40, probed=yes, supported=yes, has_mute=yes,
> has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-93,
> max_dB=0
> D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Master Mono, direction=1, switch=1, volume=1,
> enumeration=0, required=4, required_absent=0, mask=0x80, n_channels=1,
> override_map=yes
> D: alsa-mixer.c: Element Surround, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2,
> override_map=no
> D: alsa-mixer.c: Element Center, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element LFE, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4,
> volume=0, enumeration=0, required=0, required_absent=0, mask=0x0,
> n_channels=0, override_map=no
> D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1,
> priority=10
> D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier)
> index=0, priority=0
> D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
> D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
> D: alsa-mixer.c: Added 6 ports
> I: sink.c: Created sink 0 "alsa_output.pci-0000_00_0f.3.analog-stereo"
> with sample spec s16le 2ch 44100Hz and channel map
> front-left,front-right
> I: sink.c: alsa.resolution_bits = "16"
> I: sink.c: device.api = "alsa"
> I: sink.c: device.class = "sound"
> I: sink.c: alsa.class = "generic"
> I: sink.c: alsa.subclass = "generic-mix"
> I: sink.c: alsa.name = "CS5535 Audio"
> I: sink.c: alsa.id = "CS5535 Audio"
> I: sink.c: alsa.subdevice = "0"
> I: sink.c: alsa.subdevice_name = "subdevice #0"
> I: sink.c: alsa.device = "0"
> I: sink.c: alsa.card = "0"
> I: sink.c: alsa.card_name = "CS5535 Audio"
> I: sink.c: alsa.long_card_name = "CS5535 Audio cs5535audio at 0x1480,
> irq 5"
> I: sink.c: alsa.driver_name = "snd_cs5535audio"
> I: sink.c: device.bus_path = "pci-0000:00:0f.3"
> I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0f.3/sound/card0"
> I: sink.c: device.bus = "pci"
> I: sink.c: device.vendor.id = "1022"
> I: sink.c: device.vendor.name = "Advanced Micro Devices [AMD]"
> I: sink.c: device.product.id = "2093"
> I: sink.c: device.product.name = "CS5536 [Geode companion] Audio"
> I: sink.c: device.form_factor = "internal"
> I: sink.c: device.string = "hw:0"
> I: sink.c: device.buffering.buffer_size = "65536"
> I: sink.c: device.buffering.fragment_size = "32768"
> I: sink.c: device.access_mode = "mmap+timer"
> I: sink.c: device.profile.name = "analog-stereo"
> I: sink.c: device.profile.description = "Analog Stereo"
> I: sink.c: device.description = "Internal Audio Analog Stereo"
> I: sink.c: alsa.mixer_name = "Analog Devices AD1888"
> I: sink.c: alsa.components = "AC97a:41445368"
> I: sink.c: module-udev-detect.discovered = "1"
> I: sink.c: device.icon_name = "audio-card-pci"
> D: core-subscribe.c: Dropped redundant event due to change event.
> I: source.c: Created source 0
> "alsa_output.pci-0000_00_0f.3.analog-stereo.monitor" with sample spec
> s16le 2ch 44100Hz and channel map front-left,front-right
> I: source.c: device.description = "Monitor of Internal Audio Analog
> Stereo"
> I: source.c: device.class = "monitor"
> I: source.c: alsa.card = "0"
> I: source.c: alsa.card_name = "CS5535 Audio"
> I: source.c: alsa.long_card_name = "CS5535 Audio cs5535audio at
> 0x1480, irq 5"
> I: source.c: alsa.driver_name = "snd_cs5535audio"
> I: source.c: device.bus_path = "pci-0000:00:0f.3"
> I: source.c: sysfs.path =
> "/devices/pci0000:00/0000:00:0f.3/sound/card0"
> I: source.c: device.bus = "pci"
> I: source.c: device.vendor.id = "1022"
> I: source.c: device.vendor.name = "Advanced Micro Devices [AMD]"
> I: source.c: device.product.id = "2093"
> I: source.c: device.product.name = "CS5536 [Geode companion] Audio"
> I: source.c: device.form_factor = "internal"
> I: source.c: device.string = "0"
> I: source.c: module-udev-detect.discovered = "1"
> I: source.c: device.icon_name = "audio-card-pci"
> I: alsa-sink.c: Using 2.0 fragments of size 32768 bytes (185.76ms),
> buffer size is 65536 bytes (371.52ms)
> I: alsa-sink.c: Time scheduling watermark is 20.00ms
> D: alsa-sink.c: hwbuf_unused=0
> D: alsa-sink.c: setting avail_min=15502
> D: alsa-mixer.c: Activating path analog-output
> D: alsa-mixer.c: Path analog-output (Analog Output), direction=1,
> priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes,
> has_dB=yes, min_volume=0, max_volume=31, min_dB=-139.5, max_dB=0
> D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Master Mono, direction=1, switch=2, volume=2,
> enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff,
> n_channels=1, override_map=no
> D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2,
> override_map=yes
> D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4900000000018,
> n_channels=1, override_map=yes
> D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1,
> override_map=yes
> D: alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x3600000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element External Amplifier, direction=1, switch=4,
> volume=0, enumeration=0, required=0, required_absent=0, mask=0x0,
> n_channels=0, override_map=no
> D: alsa-mixer.c: Option on (output-amplifier-on/Amplifier) index=1,
> priority=10
> D: alsa-mixer.c: Option off (output-amplifier-off/No Amplifier)
> index=0, priority=0
> D: alsa-mixer.c: Setting output-amplifier-on (Amplifier) priority=10
> D: alsa-mixer.c: Setting output-amplifier-off (No Amplifier) priority=0
> I: alsa-sink.c: Hardware volume ranges from -139.50 dB to 0.00 dB.
> I: alsa-sink.c: No particular base volume set, fixing to 0 dB
> I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
> I: alsa-sink.c: Using hardware mute control.
> D: alsa-util.c: snd_pcm_dump():
> D: alsa-util.c: Hardware PCM card 0 'CS5535 Audio' device 0 subdevice 0
> D: alsa-util.c: Its setup is:
> D: alsa-util.c: stream : PLAYBACK
> D: alsa-util.c: access : MMAP_INTERLEAVED
> D: alsa-util.c: format : S16_LE
> D: alsa-util.c: subformat : STD
> D: alsa-util.c: channels : 2
> D: alsa-util.c: rate : 44100
> D: alsa-util.c: exact rate : 44100 (44100/1)
> D: alsa-util.c: msbits : 16
> D: alsa-util.c: buffer_size : 16384
> D: alsa-util.c: period_size : 8192
> D: alsa-util.c: period_time : 185759
> D: alsa-util.c: tstamp_mode : ENABLE
> D: alsa-util.c: period_step : 1
> D: alsa-util.c: avail_min : 15502
> D: alsa-util.c: period_event : 0
> D: alsa-util.c: start_threshold : -1
> D: alsa-util.c: stop_threshold : 1073741824
> D: alsa-util.c: silence_threshold: 0
> D: alsa-util.c: silence_size : 0
> D: alsa-util.c: boundary : 1073741824
> D: alsa-util.c: appl_ptr : 0
> D: alsa-util.c: hw_ptr : 0
> D: alsa-sink.c: Read hardware volume: 0: 94% 1: 94%
> D: alsa-sink.c: Thread starting up
> D: core-util.c: RealtimeKit worked.
> I: core-util.c: Successfully enabled SCHED_RR scheduling for thread,
> with priority 5.
> I: alsa-sink.c: Starting playback.
> D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
> D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
> D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
> D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
> I: (alsa-lib)conf.c: Unknown parameters 0
> I: (alsa-lib)pcm.c: Unknown PCM front:0
> I: alsa-util.c: Error opening PCM device front:0: Invalid argument
> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> D: alsa-util.c: Managed to open hw:0
> D: alsa-util.c: Maximum hw buffer size is 371 ms
> D: alsa-util.c: Set buffer size first (to 88200 samples), period size
> second (to 88200 samples).
> I: alsa-source.c: Successfully opened device hw:0.
> I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
> I: alsa-source.c: Successfully enabled mmap() mode.
> I: alsa-source.c: Successfully enabled timer-based scheduling mode.
> I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
> D: alsa-mixer.c: Probing path 'analog-input'
> D: alsa-mixer.c: Probe of element 'Mic' failed.
> D: alsa-mixer.c: Probing path 'analog-input-microphone'
> D: alsa-mixer.c: Probing path 'analog-input-linein'
> D: alsa-mixer.c: Probing path 'analog-input'
> D: alsa-mixer.c: Probing path 'analog-input-video'
> D: alsa-mixer.c: Probing path 'analog-input-video'
> D: alsa-mixer.c: Probe of element 'TV Tuner' failed.
> D: alsa-mixer.c: Probing path 'analog-input-radio'
> D: alsa-mixer.c: Probe of element 'FM' failed.
> D: alsa-mixer.c: Probing path 'analog-input'
> D: alsa-mixer.c: Probe of element 'Mic/Line' failed.
> D: alsa-source.c: Probed mixer paths:
> D: alsa-mixer.c: Path Set 0x960ea68, direction=2, probed=yes
> D: alsa-mixer.c: Path analog-input-microphone (Analog Microphone),
> direction=2, priority=100, probed=yes, supported=yes, has_mute=yes,
> has_volume=yes, has_dB=yes, min_volume=0, max_volume=15, min_dB=0,
> max_dB=22.5
> D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4037e00000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Mic, direction=2, switch=1, volume=0,
> enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0,
> override_map=yes
> D: alsa-mixer.c: Element Line, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Aux, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Video, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Mic Select, direction=2, switch=0, volume=0,
> enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Option Mic1 (input-microphone-1/Microphone 1)
> index=0, priority=20
> D: alsa-mixer.c: Option Mic2 (input-microphone-2/Microphone 2)
> index=1, priority=19
> D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
> D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
> D: alsa-mixer.c: Path analog-input-linein (Analog Line-In),
> direction=2, priority=90, probed=yes, supported=yes, has_mute=yes,
> has_volume=yes, has_dB=yes, min_volume=0, max_volume=15, min_dB=0,
> max_dB=22.5
> D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4037e00000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Mic, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Line, direction=2, switch=1, volume=0,
> enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0,
> override_map=yes
> D: alsa-mixer.c: Element Aux, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Video, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Path analog-input (Analog Input), direction=2,
> priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes,
> has_dB=yes, min_volume=0, max_volume=15, min_dB=0, max_dB=22.5
> D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4037e00000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Mic, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Line, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Aux, direction=2, switch=1, volume=0,
> enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0,
> override_map=yes
> D: alsa-mixer.c: Element Video, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Path analog-input-video (Analog Video), direction=2,
> priority=70, probed=yes, supported=yes, has_mute=yes, has_volume=yes,
> has_dB=yes, min_volume=0, max_volume=15, min_dB=0, max_dB=22.5
> D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4037e00000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Mic, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Line, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Aux, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Video, direction=2, switch=1, volume=0,
> enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0,
> override_map=yes
> D: alsa-mixer.c: Added 5 ports
> D: core-subscribe.c: Dropped redundant event due to change event.
> I: source.c: Created source 1
> "alsa_input.pci-0000_00_0f.3.analog-stereo" with sample spec s16le 2ch
> 44100Hz and channel map front-left,front-right
> I: source.c: alsa.resolution_bits = "16"
> I: source.c: device.api = "alsa"
> I: source.c: device.class = "sound"
> I: source.c: alsa.class = "generic"
> I: source.c: alsa.subclass = "generic-mix"
> I: source.c: alsa.name = "CS5535 Audio"
> I: source.c: alsa.id = "CS5535 Audio"
> I: source.c: alsa.subdevice = "0"
> I: source.c: alsa.subdevice_name = "subdevice #0"
> I: source.c: alsa.device = "0"
> I: source.c: alsa.card = "0"
> I: source.c: alsa.card_name = "CS5535 Audio"
> I: source.c: alsa.long_card_name = "CS5535 Audio cs5535audio at
> 0x1480, irq 5"
> I: source.c: alsa.driver_name = "snd_cs5535audio"
> I: source.c: device.bus_path = "pci-0000:00:0f.3"
> I: source.c: sysfs.path =
> "/devices/pci0000:00/0000:00:0f.3/sound/card0"
> I: source.c: device.bus = "pci"
> I: source.c: device.vendor.id = "1022"
> I: source.c: device.vendor.name = "Advanced Micro Devices [AMD]"
> I: source.c: device.product.id = "2093"
> I: source.c: device.product.name = "CS5536 [Geode companion] Audio"
> I: source.c: device.form_factor = "internal"
> I: source.c: device.string = "hw:0"
> I: source.c: device.buffering.buffer_size = "65536"
> I: source.c: device.buffering.fragment_size = "32768"
> I: source.c: device.access_mode = "mmap+timer"
> I: source.c: device.profile.name = "analog-stereo"
> I: source.c: device.profile.description = "Analog Stereo"
> I: source.c: device.description = "Internal Audio Analog Stereo"
> I: source.c: alsa.mixer_name = "Analog Devices AD1888"
> I: source.c: alsa.components = "AC97a:41445368"
> I: source.c: module-udev-detect.discovered = "1"
> I: source.c: device.icon_name = "audio-card-pci"
> I: alsa-source.c: Using 2.0 fragments of size 32768 bytes (185.76ms),
> buffer size is 65536 bytes (371.52ms)
> I: alsa-source.c: Time scheduling watermark is 20.00ms
> D: alsa-source.c: hwbuf_unused=0
> D: alsa-source.c: setting avail_min=15502
> D: alsa-mixer.c: Activating path analog-input-microphone
> D: alsa-mixer.c: Path analog-input-microphone (Analog Microphone),
> direction=2, priority=100, probed=yes, supported=yes, has_mute=yes,
> has_volume=yes, has_dB=yes, min_volume=0, max_volume=15, min_dB=0,
> max_dB=22.5
> D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1,
> enumeration=0, required=0, required_absent=0, mask=0x4037e00000000f66,
> n_channels=2, override_map=yes
> D: alsa-mixer.c: Element Mic, direction=2, switch=1, volume=0,
> enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0,
> override_map=yes
> D: alsa-mixer.c: Element Line, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Aux, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Video, direction=2, switch=2, volume=0,
> enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Element Mic Select, direction=2, switch=0, volume=0,
> enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0,
> override_map=no
> D: alsa-mixer.c: Option Mic1 (input-microphone-1/Microphone 1)
> index=0, priority=20
> D: alsa-mixer.c: Option Mic2 (input-microphone-2/Microphone 2)
> index=1, priority=19
> D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
> D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
> I: alsa-source.c: Hardware volume ranges from 0.00 dB to 22.50 dB.
> I: alsa-source.c: Fixing base volume to -22.50 dB
> I: alsa-source.c: Using hardware volume control. Hardware dB scale
> supported.
> I: alsa-source.c: Using hardware mute control.
> D: alsa-util.c: snd_pcm_dump():
> D: alsa-util.c: Hardware PCM card 0 'CS5535 Audio' device 0 subdevice 0
> D: alsa-util.c: Its setup is:
> D: alsa-util.c: stream : CAPTURE
> D: alsa-util.c: access : MMAP_INTERLEAVED
> D: alsa-util.c: format : S16_LE
> D: alsa-util.c: subformat : STD
> D: alsa-util.c: channels : 2
> D: alsa-util.c: rate : 44100
> D: alsa-util.c: exact rate : 44100 (44100/1)
> D: alsa-util.c: msbits : 16
> D: alsa-util.c: buffer_size : 16384
> D: alsa-util.c: period_size : 8192
> D: alsa-util.c: period_time : 185759
> D: alsa-util.c: tstamp_mode : ENABLE
> D: alsa-util.c: period_step : 1
> D: alsa-util.c: avail_min : 15502
> D: alsa-util.c: period_event : 0
> D: alsa-util.c: start_threshold : -1
> D: alsa-util.c: stop_threshold : 1073741824
> D: alsa-util.c: silence_threshold: 0
> D: alsa-util.c: silence_size : 0
> D: alsa-util.c: boundary : 1073741824
> D: alsa-util.c: appl_ptr : 0
> D: alsa-util.c: hw_ptr : 0
> D: alsa-source.c: Read hardware volume: 0: 67% 1: 67%
> D: alsa-source.c: Thread starting up
> D: core-util.c: RealtimeKit worked.
> I: core-util.c: Successfully enabled SCHED_RR scheduling for thread,
> with priority 5.
> I: module.c: Loaded "module-alsa-card" (index: #4; argument:
> "device_id="0" name="pci-0000_00_0f.3"
> card_name="alsa_card.pci-0000_00_0f.3" tsched=yes ignore_dB=no
> card_properties="module-udev-detect.discovered=1"").
> I: module-udev-detect.c: Card
> /devices/pci0000:00/0000:00:0f.3/sound/card0
> (alsa_card.pci-0000_00_0f.3) module loaded.
> I: module-udev-detect.c: Found 1 cards.
> I: module.c: Loaded "module-udev-detect" (index: #5; argument: "").
> D: cli-command.c: Checking for existance of
> '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': failure
> D: cli-command.c: Checking for existance of
> '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so':
> success
> I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument:
> "").
> D: authkey.c: Got 0 bytes from cookie file '/home/olpc/.pulse-cookie',
> expected 256
> I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument:
> "").
> D: cli-command.c: Checking for existance of
> '/usr/lib/pulse-0.9.21/modules/module-gconf.so': failure
> I: module.c: Loaded "module-default-device-restore" (index: #8; argument:
> "").
> I: module.c: Loaded "module-rescue-streams" (index: #9; argument: "").
> I: module.c: Loaded "module-always-sink" (index: #10; argument: "").
> I: module.c: Loaded "module-intended-roles" (index: #11; argument: "").
> D: module-suspend-on-idle.c: Sink
> alsa_output.pci-0000_00_0f.3.analog-stereo becomes idle, timeout in 5
> seconds.
> D: module-suspend-on-idle.c: Source
> alsa_input.pci-0000_00_0f.3.analog-stereo becomes idle, timeout in 5
> seconds.
> I: module.c: Loaded "module-suspend-on-idle" (index: #12; argument: "").
> D: dbus-util.c: Successfully connected to D-Bus system bus
> a62f11bda26be72a1398bb610000001a as :1.35
> I: client.c: Created 0 "ConsoleKit Session
> /org/freedesktop/ConsoleKit/Session1"
> D: module-console-kit.c: Added new session
> /org/freedesktop/ConsoleKit/Session1
> I: module.c: Loaded "module-console-kit" (index: #13; argument: "").
> I: module.c: Loaded "module-position-event-sounds" (index: #14; argument:
> "").
> I: module.c: Loaded "module-cork-music-on-phone" (index: #15; argument:
> "").
> D: main.c: Got org.pulseaudio.Server!
> I: main.c: Daemon startup complete.
> D: module-console-kit.c: dbus: interface=org.freedesktop.DBus,
> path=/org/freedesktop/DBus, member=NameAcquired
> I: module-device-restore.c: Storing volume/mute/port for device
> sink:alsa_output.pci-0000_00_0f.3.analog-stereo.
> I: module-device-restore.c: Storing volume/mute/port for device
> source:alsa_output.pci-0000_00_0f.3.analog-stereo.monitor.
> I: module-device-restore.c: Storing volume/mute/port for device
> source:alsa_input.pci-0000_00_0f.3.analog-stereo.
> D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
> D: alsa-sink.c: Wakeup from ALSA!
> I: module-suspend-on-idle.c: Source
> alsa_input.pci-0000_00_0f.3.analog-stereo idle for too long,
> suspending ...
> D: source.c: Suspend cause of source
> alsa_input.pci-0000_00_0f.3.analog-stereo is 0x0004, suspending
> I: alsa-source.c: Device suspended...
> I: module-suspend-on-idle.c: Sink
> alsa_output.pci-0000_00_0f.3.analog-stereo idle for too long,
> suspending ...
> D: sink.c: Suspend cause of sink
> alsa_output.pci-0000_00_0f.3.analog-stereo is 0x0004, suspending
> I: alsa-sink.c: Device suspended...
> D: reserve-wrap.c: Device lock status of
> reserve-monitor-wrapper at Audio0 changed: not busy
> D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
> D: core-subscribe.c: Dropped redundant event due to change event.
> I: module-device-restore.c: Synced.
> I: main.c: Got signal SIGINT.
> I: main.c: Exiting.
> I: main.c: Daemon shutdown initiated.
> I: module.c: Unloading "module-device-restore" (index: #0).
> I: module.c: Unloaded "module-device-restore" (index: #0).
> I: module.c: Unloading "module-stream-restore" (index: #1).
> I: module.c: Unloaded "module-stream-restore" (index: #1).
> I: module.c: Unloading "module-card-restore" (index: #2).
> I: module.c: Unloaded "module-card-restore" (index: #2).
> I: module.c: Unloading "module-augment-properties" (index: #3).
> I: module.c: Unloaded "module-augment-properties" (index: #3).
> I: module.c: Unloading "module-alsa-card" (index: #4).
> D: alsa-sink.c: Thread shutting down
> I: sink.c: Freeing sink 0 "alsa_output.pci-0000_00_0f.3.analog-stereo"
> I: source.c: Freeing source 0
> "alsa_output.pci-0000_00_0f.3.analog-stereo.monitor"
> D: core-subscribe.c: Dropped redundant event due to change event.
> D: alsa-source.c: Thread shutting down
> I: source.c: Freeing source 1 "alsa_input.pci-0000_00_0f.3.analog-stereo"
> I: card.c: Freed 0 "alsa_card.pci-0000_00_0f.3"
> I: module.c: Unloaded "module-alsa-card" (index: #4).
> I: module.c: Unloading "module-udev-detect" (index: #5).
> I: module.c: Unloaded "module-udev-detect" (index: #5).
> I: module.c: Unloading "module-esound-protocol-unix" (index: #6).
> I: module.c: Unloaded "module-esound-protocol-unix" (index: #6).
> I: module.c: Unloading "module-native-protocol-unix" (index: #7).
> I: module.c: Unloaded "module-native-protocol-unix" (index: #7).
> I: module.c: Unloading "module-default-device-restore" (index: #8).
> I: module.c: Unloaded "module-default-device-restore" (index: #8).
> I: module.c: Unloading "module-rescue-streams" (index: #9).
> I: module.c: Unloaded "module-rescue-streams" (index: #9).
> I: module.c: Unloading "module-always-sink" (index: #10).
> I: module.c: Unloaded "module-always-sink" (index: #10).
> I: module.c: Unloading "module-intended-roles" (index: #11).
> I: module.c: Unloaded "module-intended-roles" (index: #11).
> I: module.c: Unloading "module-suspend-on-idle" (index: #12).
> I: module.c: Unloaded "module-suspend-on-idle" (index: #12).
> I: module.c: Unloading "module-console-kit" (index: #13).
> D: module-console-kit.c: Removing session
> /org/freedesktop/ConsoleKit/Session1
> I: client.c: Freed 0 "ConsoleKit Session
> /org/freedesktop/ConsoleKit/Session1"
> I: module.c: Unloaded "module-console-kit" (index: #13).
> I: module.c: Unloading "module-position-event-sounds" (index: #14).
> I: module.c: Unloaded "module-position-event-sounds" (index: #14).
> I: module.c: Unloading "module-cork-music-on-phone" (index: #15).
> I: module.c: Unloaded "module-cork-music-on-phone" (index: #15).
> I: main.c: Daemon terminated.
>
> ################################################################################################################
>
>
>
>
> e)
> Finally, it is heartening to hear that pulseaudio should not be run as
> root :D
> I tried it, just because there was too much talks of pulseaudio
> working in root mode, but not otherwise; after
> "alsa-plugins-pulseaudio" is installed (courtesy Google :D )
>
>
> Sean, I again thank you for your prompt reply.
>
> Please let me know what else I can try out, as it might very well be
> some configuration issues in pulseaudio - more so, since pulseaudio
> seems to work just fine on my Dell F14.
>
>
>
> Thanks and Regards,
> Ajay
>
>
>
> On Sat, Jun 2, 2012 at 7:13 PM, Sean M :cNamara <smcnam at gmail.com> wrote:
> > Hi,
> >
> > On Sat, Jun 2, 2012 at 9:02 AM, Ajay Garg <ajay at activitycentral.com>
> wrote:
> >> Hi all.
> >>
> >> I have been banging my head for over 5 days now; went through whatever
> >> google-literature I could possibly through.
> >> But I guess I will have to ask the experts :|
> >>
> >>
> >> I will list down my queries with the story regarding that query, so as
> to
> >> maintain modularity as far as possible.
> >>
> >>
> >> I have a x86-based Fedora-14 Dell laptop; and a XO-1.
> >
> > What is your XO-1 running? Is it also Fedora 14? You didn't specify,
> > unless you implied that the XO-1 is running the same as the Dell.
> >
> >>
> >>
> >> A)
> >> On my Dell laptop, the following work seamlessly, and I am able to
> enjoy the
> >> mp3.
> >>
> >> (i) gst-launch filesrc location=/path/to/mp3 ! mad ! alsasink
> >>
> >> (ii) gst-launch filesrc location=/path/to/mp3 ! mad ! pulsesink
> >>
> >>
> >> However, on my XO-1, only the following works ::
> >>
> >>
> >> (i) gst-launch filesrc location=/path/to/mp3 ! mad ! alsasink
> >>
> >> whereas the following shows the "pulsesink" plugin not found error ::
> >>
> >> (ii) gst-launch filesrc location=/path/to/mp3 ! mad ! pulsesink
> >>
> >>
> >> I figured out that the package "gstreamer-plugins-good" is required for
> the
> >> "pulsesink" plugin.
> >>
> >> So, I did "gst-inspect" on both machines, and "rpm -qa | grep
> >> gstreamer-plugins-good" on both the machines.
> >>
> >> To my horror, I saw that the package
> >> "gstreamer-plugins-good-0.10.26-1.fc14.i686" was installed on both the
> Dell
> >> machine, and the XO-1, but only the Dell laptop showed the presence of
> >> "pulsesink".
> >>
> >> Why could this difference be ?
> >>
> >
> > I don't know for sure, but if the pulseaudio plugin for gstreamer has
> > an unresolved link-time dependency, the gstreamer plugin loader won't
> > be able to load it. So for example if libpulse is not available...
> >
> > Sounds like you manually messed with the XO-1 to some degree, as it
> > should not be in this state out of the box. In fact I can practically
> > guarantee that it *isn't*. You, or some software you installed, took
> > some action to bring the machine into this state. The default install
> > of Fedora Gnome has been shipping with the gstreamer plugin for
> > pulseaudio and pulseaudio itself for quite some time; definitely since
> > Fedora 14 or even earlier. You should be able to come out of a clean
> > install and immediately play gstreamer audio through pulseaudio with
> > no tweaking whatsoever. So the fact that yours is borked points to
> > something that has happened after installation.
> >
> >
> >>
> >>
> >>
> >>
> >>
> >> B)
> >> Anyhow, I copied "libgstpulse.so" from my Dell machine to the XO-1.
> >> Thereafter, "pulsesink" could be recognised on the XO-1.
> >>
> >> However, "gst-launch filesrc location=/path/to/mp3 ! mad ! pulsesink"
> >> resulted in a sound only on Dell, and not XO-1.
> >
> > Did you run gst-launch with the -v switch for verbose? Sounds like
> > pulseaudio isn't running, or you don't have the pulseaudio libraries
> > installed.
> >
> > gst-launch-0.10 -v audiotestsrc ! volume volume=0.4 ! audioconvert !
> > pulsesink #warning: generated sound may be loud if it works, turn down
> > your speakers
> >
> > If it produces any output on the console, post it back to the ML.
> >
> >>
> >> So, I researched further, and concluded that I needed to install
> >> "alsa-plugins-pulseaudio" on the XO-1, so as to set up the pulseaudio
> >> server, and have the alsa-device as the "other end of the pulseaudio
> proxy".
> >
> > That is incorrect. The pulseaudio plugin for libasound2 (the
> > user-space ALSA library) is designed to allow applications coded
> > against the ALSA API to have their sound re-routed through pulseaudio.
> > alsa-plugins-pulseaudio does NOT affect the way that pulseaudio itself
> > plays audio to its ALSA backend, because pulseaudio itself
> > automatically detects (using one of the detection modules) your
> > hardware sound cards.
> >
> > Also, pulseaudio is not a "proxy" in this setup; you're just trying to
> > play audio locally.
> >
> >
> >>
> >> So, I installed the package.
> >>
> >> However, SOUND HAS STOPPED PLAYING COMPLETELY ON THE XO-1 (the only
> time I
> >> hear some sound is during boot-up time).
> >
> > This isn't very surprising to me, considering that you already stated
> > that pulsesink isn't playing audio. Your PA daemon is somehow not
> > configured correctly or is not running in the first place.
> >
> > alsa-plugins-pulseaudio is designed so that any well-behaved ALSA
> > application will try to play audio through the "pulse" software device
> > at the ALSA layer (libasound2). To get technical, it remaps the
> > "default" device to an instance of the "type pulse" device, so that an
> > application calling
> >
> > snd_pcm_open(&pcm, "default", ...)
> >
> > will actually be sending the audio through pulseaudio, rather than
> > "directly" through ALSA. This is done because 99.9% of the audio
> > devices out there only support software mixing, so you won't be able
> > to simultaneously listen to pulseaudio playing its own audio AND some
> > application playing audio directly to the ALSA hardware, e.g. with:
> >
> > snd_pcm_open(&pcm, "hw:0", ...)
> >
> > Thus, to avoid this problem, pulseaudio (and also ALSA) developers
> > have been trying to educate application developers on how to safely
> > write ALSA code so that it will use a default plugin if available, and
> > if not, then it goes to the hardware directly. Once you install
> > alsa-plugins-pulseaudio, the hardware path is still available, but
> > it's not the "default" device. So the "default" device tries to
> > connect to pulseaudio.
> >
> >>
> >> If I remove "alsa-plugins-pulseaudio", I can again hear the sound via
> >> "alsasink", but not through "pulsesink".
> >
> > This is in line with my explanation above.
> >
> >>
> >> If I re-install "alsa-plugins-pulseaudio", I can not hear sound through
> >> "alsasink", nor "pulsesink",
> >> (
> >> not even after doing the following steps ::
> >>
> >> pulsesudio --kill
> >> sudo rm -r ~/.pulse
> >> sudo rm -r ~/.pulse-cookie
> >> pulseaudio --start
> >>
> >> <trying to run the mp3 with sudo previleges.>
> >
> > Well there's one potential problem. You will normally not be able to
> > run audio applications as root if your pulseaudio daemon is started as
> > a user. And you really, really, really shouldn't run pulseaudio as
> > root (p.s. sudo == running as root), either. So basically, unless you
> > have a very compelling need to run audio as root, don't do it. Start
> > pulseaudio as a regular user, and run your audio applications... as a
> > regular user.
> >
> > Instead of pulseaudio --start, can you post the log output of:
> >
> > pulseaudio --daemonize=false -vvvv
> >
> > to the ML?
> >
> >> )
> >>
> >>
> >> So, what other thing could I possibly do?
> >
> > P.S. - Fedora *17* is out now, so unless you have some specific reason
> > not to upgrade (I can't think of one), you'd be better off doing so. A
> > lot of bugs have been fixed in the audio stack since. Fedora isn't
> > exactly the best distro for running an ancient release for years; for
> > that type of setup I'd recommend RHEL/CentOS or Debian Stable.
> >
> >>
> >>
> >>
> >> Will be grateful for a reply.
> >>
> >>
> >> Thanks and Regards,
> >> Ajay
> >>
> >>
> >>
> >> _______________________________________________
> >> gstreamer-devel mailing list
> >> gstreamer-devel at lists.freedesktop.org
> >> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> >>
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20120602/6b1c8ec7/attachment-0001.html>
More information about the gstreamer-devel
mailing list