GStreamer and Rasperry PI

[Richard]

I am in much the same boat :D

I found out the missing config file caused the blacklist, when I fixed
it; the gst-inspect did not exit.

Strace shows (last line repeats .. and has been for the last 6hrs)

read(10, "\4\0\0k\0\0\2\376\276\376\300\256", 12) = 12
read(10, "(h\0\0\306\320\315O\0\0\0\0\2\0\0\0cdxaparse\0Parse "..., 766) = 766
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 1 ([{fd=10, revread(10, "\4\0\0k\0\0\2\376\276\376\300\256", 12) =
12
read(10, "(h\0\0\306\320\315O\0\0\0\0\2\0\0\0cdxaparse\0Parse "..., 766) = 766
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 1 ([{fd=10, revents=POLLIN}], left {0, 938998213})
read(10, "\4\0\0l\0\0\3\366\276\376\300\256", 12) = 12
read(10, "XW\0\0\275\320\315O\0\0\0\0\1\0\0\0speed\0Set speed/"..., 1014) = 1014
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)
ents=POLLIN}], left {0, 938998213})
read(10, "\4\0\0l\0\0\3\366\276\376\300\256", 12) = 12
read(10, "XW\0\0\275\320\315O\0\0\0\0\1\0\0\0speed\0Set speed/"..., 1014) = 1014
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)
ppoll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9,
events=POLLERR|POLLHUP|POLLNVAL}, {fd=10,
events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 3, {1, 0}, NULL, 8)
= 0 (Timeout)


Richard
On 19 June 2012 23:06, pauly24 <paul.gangemi86 at gmail.com> wrote:
> I have gotten GStreamer working on the Raspberry PI as is (Basic install no
> hardware accel plugins)
>
> I've spent the last week trying to get
> git://git.collabora.co.uk/git/user/gkiagia/gst-omx0.10-debian.git
>
> working with it so I can use the broadcom GPU chip on the raspberry.
>
> But I'm having absolutely on luck at all getting this plug in to work, has
> anyone done this or can give me some tips?
> Once I install gst-omx it just stays in my blacklisted plugins.
>
> --
> View this message in context: http://gstreamer-devel.966125.n4.nabble.com/GStreamer-and-Rasperry-PI-tp4655338.html
> Sent from the GStreamer-devel mailing list archive at Nabble.com.
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel