gstreamer client pipeline to view video from AXIS M1054 Network Camera

[Robert Krakora]

Sorry, meant to say Wireshark or Tshark...


On Fri, May 23, 2014 at 5:36 PM, Robert Krakora <
rob.krakora at messagenetsystems.com> wrote:

> Hi Dale,
>
> Do you want to view the multicast data after it has been captured to a
> file via a GStreamer pipeline or in realtime with Wireshark or shark?
>
> Best Regards,
>
> Rob Krakora
>
>
>
> On Fri, May 23, 2014 at 5:34 PM, Dale Johnson <djohnson at tplogic.com>wrote:
>
>> Hi Chuck,
>>
>>
>>
>> Thank you for your pronto response – always good to hear back from you.
>> I may not be making myself clear in my post.  I CAN view this stream NOW
>> using:
>>
>>
>>
>> gst-launch-1.0 rtspsrc location=rtsp://192.168.0.186/axis-media/media.ampuser-id=root user-pw=
>> *xxxxxxxxxxc* latency=150 ! decodebin max-size-time=30000000000 !
>> videoconvert ! autovideosink
>>
>>
>>
>> However, I would also like to understand how to view the camera’s H264
>> video streaming from multicast address 239.231.113.103, port 50000.  And
>> that is the pipeline about which I am inquiring in my mailing list entry.
>>
>>
>>
>> Any ideas?  Can you advise how better to pose my question?  I will note
>> that VLC will successfully open the sdp file (whose contents are inserted
>> in my inquiry and whose contents describe the above-mentioned multicast
>> video stream) and show its video.
>>
>>
>>
>> I look forward to another response from you.
>>
>>
>>
>> ~Dale
>>
>>
>>
>>
>>
>> *From:* Chuck Crisler [mailto:ccrisler at mutualink.net]
>> *Sent:* Friday, May 23, 2014 2:15 PM
>> *To:* Dale.Johnson at tplogic.com; Discussion of the development of and
>> with GStreamer
>> *Subject:* Re: gstreamer client pipeline to view video from AXIS M1054
>> Network Camera
>>
>>
>>
>> Here is a test pipeline of mine. This is for Linux.
>>
>> gst-launch -vvv rtspsrc location=rtsp://$1:$2@$3 \
>>     ! queue ! rtph264depay ! ffdec_h264 ! ximagesink
>>
>> $1 is the username
>>
>> $2 is the password
>>
>> $3 is the URL
>>
>> So, for an Axis camera, location looks like 'rtsp://
>> username:password at 192.168.1.1:554/axis-media/media.amp
>>
>>
>>
>> On Fri, May 23, 2014 at 5:01 PM, Dale Johnson <djohnson at tplogic.com>
>> wrote:
>>
>> I’m still working on figuring out gstreamer pipeline to view this stream
>> described below.  Any input would be appreciated.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Dale
>>
>>
>>
>> Contents of sdp file for this stream are:
>>
>>
>>
>> v=0
>>
>> o=private 1343035391323762 1343035391323762 IN IP4 10.1.2.3
>>
>> s=Media Presentation
>>
>> e=NONE
>>
>> b=AS:50000
>>
>> t=0 0
>>
>> a=range:npt=0.000000-
>>
>> m=video 50000 RTP/AVP 96
>>
>> c=IN IP4 239.231.113.103/0
>>
>> b=AS:50000
>>
>> a=framerate:30.0
>>
>> a=transform:1,0,0;0,1,0;0,0,1
>>
>> a=rtpmap:96 H264/90000
>>
>> a=fmtp:96 packetization-mode=1; profile-level-id=420029;
>> sprop-parameter-sets=Z0IAKeKQFAX/LgLcBAQGkHiRFQ==,aM48gA==
>>
>>
>>
>>
>>
>>
>>
>> On Wed, 2014-05-21 at 18:09 -0400, Chuck Crisler wrote:
>>
>>
>>
>> >* I thought that Axis cameras usually implemented an RTSP server, so
>> you*
>>
>> >* simply connect as you would to any RTSP source.*
>>
>>
>>
>> So something like
>>
>>
>>
>>   gst-launch-1.0 playbin uri=rtsp://10.0.0.1/...
>>
>>
>>
>> should work.
>>
>>
>>
>> Cheers
>>
>> -Tim
>>
>> --
>>
>> Tim Müller, Centricular Ltd - http://www.centricular.com
>>
>>
>>
>>
>> _______________________________________________
>> gstreamer-devel mailing list
>> gstreamer-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>
>>
>>
>> _______________________________________________
>> gstreamer-devel mailing list
>> gstreamer-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>
>>
>
>
> --
>
> Rob Krakora,
> Senior Software Engineer
>
> MessageNet Systems
> 101 E Carmel Dr, Suite 105
> Carmel, IN 46032
>
> MessageNetSystems.com<http://www.messagenetcommunicationsystems.com/?utm_source=email+signature&utm_medium=email&utm_campaign=email+signature+to+homepage>
> Rob.Krakora at MessageNetSystems.com <rob.krakora at messagenetsystems.com>
> P: 317.566.1677, 212
> F: 317.663.0808
>
> For the latest news, information, and blogs, please be sure to visit,
> follow, and like us...
>
>
> <http://www.messagenetcommunicationsystems.com/get-the-message-out-blog/?utm_source=email+signature&utm_medium=email&utm_campaign=gmail+signature+to+blog>
>    <http://www.youtube.com/user/MessageNetConnection/feed>  <http://www.linkedin.com/company/messagenet-systems>
>    <http://twitter.com/MessageNet>  <http://www.facebook.com/MessageNetsystems>
>



-- 

Rob Krakora,
Senior Software Engineer

MessageNet Systems
101 E Carmel Dr, Suite 105
Carmel, IN 46032

MessageNetSystems.com<http://www.messagenetcommunicationsystems.com/?utm_source=email+signature&utm_medium=email&utm_campaign=email+signature+to+homepage>
Rob.Krakora at MessageNetSystems.com <rob.krakora at messagenetsystems.com>
P: 317.566.1677, 212
F: 317.663.0808

For the latest news, information, and blogs, please be sure to visit,
follow, and like us...

<http://www.messagenetcommunicationsystems.com/get-the-message-out-blog/?utm_source=email+signature&utm_medium=email&utm_campaign=gmail+signature+to+blog>
   <http://www.youtube.com/user/MessageNetConnection/feed>
<http://www.linkedin.com/company/messagenet-systems>
   <http://twitter.com/MessageNet>  <http://www.facebook.com/MessageNetsystems>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20140523/98644f8e/attachment-0001.html>