Failed in RTP and RTSP over HTTP
s_kamiya at toa.co.jp
s_kamiya at toa.co.jp
Mon Apr 18 07:04:15 UTC 2016
Hi, Nicola
I have gotten the advice previously, I succeeded in the reception of the
"RTP and RTSP over HTTP" in gstreamer ver.1.8.0.
I used the following command at that time.
.\Gst-launch-1.0.exe -v rtspsrc debug = TRUE location =
rtsph://root:root@10.107.14.2:80 / axis-media / media.amp videocodec =
h264 latency = 100 ! rtph264depay ! avdec_h264 ! autovideosink
However, depending on the camera manufacturers, it does not accept the
user name and password is embedded URL.
For example, TOA company's Onvif camera "N-C3120" does not accept this
URL.
Please tell me how to tell a user name and password to the camera in other
ways that are not URL using the gst-launch.
I tried the following command, but failed both AXIS and TOA.
. \ Gst-launch-1.0.exe -v rtspsrc debug = TRUE location =
rtsph://10.107.14.2/axis-media/media.amp Videocodec = h264 user-id = admin
user-pw = guest latency = 100 ! rtph264depay ! avdec_h264 ! autovideosink
. \ Gst-launch-1.0.exe -v rtspsrc debug = TRUE location =
rtsph://axis-media/media.amp Videocodec = h264 proxy =
http://10.107.14.2:80 proxy-id = root proxy- pw = root latency = 100 !
rtph264depay ! avdec_h264! autovideosink
Thank you for your attention.
"gstreamer-devel" <gstreamer-devel-bounces at lists.freedesktop.org> wrote on
2016/03/31 12:34:57:
>
> Hi, Nicola
> Thank you for your reply.
> I was able to run the gst-launch in gstreamer ver.1.8.0 of official
> windows binaries.
> And, I was able to receive the "RTP and RTSP over HTTP" in the next
> command.
> .\gst-launch-1.0.exe -v rtspsrc debug=TRUE
>
location=rtsph://root:root@10.107.14.2:80/axis-media/media.amp?videocodec=h264
> latency=100 ! rtph264depay ! avdec_h264 ! autovideosink
> Thank you very much !
>
> "gstreamer-devel" <gstreamer-devel-bounces at lists.freedesktop.org> wrote
on
> 2016/03/31 00:09:25:
> > > Hi, Nicola
> > >
> > > Thank you for your reply.
> > >
> > > I would like to try in gstreamer ver.1.8.0.
> > > I am using the MSYS2, but I could only upgrade to Ver.1.6.3 the
> gstreamer
> > > in the next command.
> > >
> > > update-core
> > > pacman -Syu
> > >
> > > If you know how to upgrade the gstreamer to ver.1.8.0 in MSYS2,
please
> > > tell me.
> > >
> > > If you can not achieve in the current version of MSYS2, please tell
me
> the
> > > other ways that you can run the gst-launch of gstreamer ver.1.8.0 in
> > > Windows.
> > >
> > > Thank you for your attention.
> > Hi,
> > give a try to the official windows binaries:
> > https://gstreamer.freedesktop.org/data/pkg/windows/1.8.0/
> > Nicola
> > >
> > >
> > > "gstreamer-devel" <gstreamer-devel-bounces at lists.freedesktop.org>
> wrote on
> > > 2016/03/30 16:06:51:
> > >
> > >> Hi,
> > >> this is a know bug in 1.6.x, gstreamer is unable to authenticate
when
> > >> using rtsp over http, it works with 1.6.x if you disable
> authentication
> > >> on the camera and it works with and without authentication using
> 1.8.x
> > >> so I suggest to upgrade your gstreamer installation to 1.8 and
retry,
> > >> Nicola
> > >> Il 30/03/2016 07:04, s_kamiya at toa.co.jp ha scritto:
> > >>> My name is geysee.
> > >>> Nice to meet you.
> > >>>
> > >>> I am trying to streaming playback of network camera using the
> > > gst-launch.
> > >>> I have succeeded in "RTSP", however, I failed in "RTP and RTSP
over
> > > HTTP".
> > >>> On the other hand, if I used the VLC, I was successful even "RTP
and
> > > RTSP
> > >>> over HTTP".
> > >>> So that I can succeed "RTP and RTSP over HTTP" in the gst-launch,
> > > please
> > >>> your advice.
> > >>> Details are described below.
> > >>> Thank you for your attention.
> > >>>
> > >>> ### Successful ###
> > >>>
> > >>> gst-launch command
> > >>>
> > >>> gst-launch-1.0.exe -v rtspsrc location =
> > >>> rtsp://root:root@10.107.14.2/axis-media/media.amp videocodec =
h264
> > >>> latency = 100 rtph264depay avdec_h264 autovideosink
> > >>>
> > >>> VLC
> > >>> 1. VLC setting : Check the "HTTP over tunnel RTSP and RTP".
> > >>> 2. VLC setting : Set network URL to
> > >>> "rtsp://root:root@10.107.14.2/axis-media/media.amp.
> > >>> 3. Play.
> > >>>
> > >>>
> > >>> ## failed ###
> > >>>
> > >>> gst-launch command
> > >>>
> > >>> gst-launch-1.0.exe -v rtspsrc debug = TRUE protocol = 20
> location =
> > >>> rtsph://root:root@10.107.14.2/axis-media/media.amp videocodec =
h264
> > >>> latency = 100 rtph264depay avdec_h264 autovideosink
> > >>>
> > >>> gst-launch-1.0.exe -v rtspsrc debug = TRUE protocol = 31
> location =
> > >>> rtsph://root:root@10.107.14.2:?!! 80 / axis-media / media.amp
> > > videocodec =
> > >>> h264 latency = 100 rtph264depay avdec_h264 ! autovideosink
> > >>>
> > >>> gst-launch-1.0.exe -v rtspsrc debug = TRUE protocols = 31
> location
> > > =
> > >>> rtsph://root:root@10.107.14.2/axis-media/media.amp videocodec =
h264
> > > proxy
> > >>> = http: //10.107.14.23 :!!! 80 proxy-id = admin proxy-pw = guest
> > > latency =
> > >>> 100 rtph264depay avdec_h264 autovideosink
> > >>>
> > >>> *I tried set protocols option to 1,2,4,8,15,16,20,31,32. but
failed.
> > >>>
> > >>>
> > >>> ### Environment ###
> > >>>
> > >>> gstreamer
> > >>> local / mingw-w64-i686-clutter-gst 3.0.14-1
> > >>> local / mingw-w64-i686-gst-editing-services 1.4.0-1
> > >>> local / mingw-w64-i686-gst-libav 1.6.3-1
> > >>> local / mingw-w64-i686-gst-plugins-bad 1.6.3-1
> > >>> local / mingw-w64-i686-gst-plugins-base 1.6.3-1
> > >>> local / mingw-w64-i686-gst-plugins-good 1.6.3-1
> > >>> local / mingw-w64-i686-gst-plugins-ugly 1.6.3-1
> > >>> local / mingw-w64-i686-gstreamer 1.6.3-1
> > >>>
> > >>> PC
> > >>> Windows 7 Professional SP1 32bit
> > >>>
> > >>> camera
> > >>> AXIS P3301
> > >>> _______________________________________________
> > >>> gstreamer-devel mailing list
> > >>> gstreamer-devel at lists.freedesktop.org
> > >>> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> > >> _______________________________________________
> > >> gstreamer-devel mailing list
> > >> gstreamer-devel at lists.freedesktop.org
> > >> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> > > _______________________________________________
> > > gstreamer-devel mailing list
> > > gstreamer-devel at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> > _______________________________________________
> > gstreamer-devel mailing list
> > gstreamer-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
More information about the gstreamer-devel
mailing list