Frame resolution settings in gstreamer pipeline

[Mohammad, Jamal M]

I got error.

C:\Windows\System32>C:\gstreamer\1.0\x86_64\bin\gst-launch-1.0.exe -v dx9screencapsrc  ! queue ! 'video/x-raw,width=1024,height=768' ! videoconvert  ! x264enc  ! "video/x-h264,profile=baseline" ! h264parse config-interval=-1 ! rtph264pay pt=96 config-interval=-1 ! udpsink host=153.77.205.139 port=5009 sync=true

(gst-launch-1.0:10452): GStreamer-CRITICAL **: gst_element_make_from_uri: assertion 'gst_uri_is_valid (uri)' failed
WARNING: erroneous pipeline: syntax error

-----Original Message-----
From: gstreamer-devel [mailto:gstreamer-devel-bounces at lists.freedesktop.org] On Behalf Of aasim
Sent: Friday, February 02, 2018 11:54 AM
To: gstreamer-devel at lists.freedesktop.org
Subject: Re: Frame resolution settings in gstreamer pipeline

Hi Mohammed,

This was my link when i was using Tx2 hardware , you can modify your command based on this 

gst-launch-1.0 nvcamerasrc sensor-id=0  ! queue !
'video/x-raw(memory:NVMM),width=1280, height=720, format=NV12' ! omxh264enc
bitrate=3000000 control-rate=2  ! 'video/x-h264, streamformat=(string)byte-stream' ! h264parse ! flvmux name=mux alsasrc
device=plughw:1 ! audioresample ! audio/x-raw,rate=48000,channels=1 ! queue ! voaacenc bitrate=32000 ! queue ! mux. mux.  ! queue ! rtmpsink location='rtmp://192.168.1.236:1935/live/102'





--
Sent from: https://urldefense.proofpoint.com/v2/url?u=http-3A__gstreamer-2Ddevel.966125.n4.nabble.com_&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=HoPNfXl6KDHgz0TaiQjVDg&m=sklaskU7KJ6p3REakQyi_8l3LOFkCvgIOPJLrjp_2cI&s=3LQttvyVhDWHQp-waw6GRdDTTAVMR-V0jkAdW7QMDjo&e=
_______________________________________________
gstreamer-devel mailing list
gstreamer-devel at lists.freedesktop.org
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.freedesktop.org_mailman_listinfo_gstreamer-2Ddevel&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=HoPNfXl6KDHgz0TaiQjVDg&m=sklaskU7KJ6p3REakQyi_8l3LOFkCvgIOPJLrjp_2cI&s=ybL9WonaPp0ZHb9rKeMNxWIIyP0Oum2-LdkAmmaNC-4&e=