How to set framerate for raw video in rtsp

[Michael MacIntosh]

You might want to check what your network usage is at, because at that 
resolution and frame rate you are probably saturating any network device 
you could possibly want to use (on the order of several gigabytes per 
second so well past 10 gbps).  You should probably encode the video.

On 3/30/2019 3:46 AM, longkas wrote:
> Hello,
> I try to send raw video via rtsp and then play it, but the framerate is very
> low, I have tried to set the frame rate in the sdp file but not work
>
> 1) #server:
> gst-launch-1.0 -v videotestsrc pattern=ball !
> video/x-raw,format=UYVY,framerate=60/1,width=1920,height=1080 ! rtpvrawpay !
> udpsink  host=127.0.0.1 port=5555
>
> 2) # sdp file
> SDP:
> v=0
> o=- 0 0 IN IP4 127.0.0.1
> s=No Name
> t=0 0
> a=tool:libavformat 58.20.100
> m=video 5555 RTP/AVP 96
> c=IN IP4 127.0.0.1
> a=rtpmap:96 raw/90000
> a=fmtp:96
> rate=90000;sampling=YCbCr-4:2:2;depth=8;width=1920;height=1080;colorimetry=BT601-5;a-framerate=60
> a=framerate:60
>
> 3)client:
> gst-launch-1.0 -v sdpsrc location=sdp://d:/stream.sdp name=sdp  \
>      sdp.  ! rtpvrawdepay   ! autovideosink
>
>
>
> --
> Sent from: http://gstreamer-devel.966125.n4.nabble.com/
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel