AW: AW: Pipeline fails after exactly 2.5 hours

[Thornton, Keith]

Hi,
we have a patch from Jan for our own use-case but he says it is generally difficult because the code is in BaseParser and this could have a detrimental effect for other parsers.
Gruesse

-----Ursprüngliche Nachricht-----
Von: gstreamer-devel <gstreamer-devel-bounces at lists.freedesktop.org> Im Auftrag von Nicolas Dufresne
Gesendet: Montag, 18. November 2019 19:32
An: Discussion of the development of and with GStreamer <gstreamer-devel at lists.freedesktop.org>
Betreff: Re: AW: Pipeline fails after exactly 2.5 hours

Le lundi 18 novembre 2019 à 09:28 +0000, Thornton, Keith a écrit :
> Hi,
> we have a similar problem caused by two frames with the same timestamp 
> being sent down the pipeline. The h264parse plugin changes the timestamp of the second frame to CLOCK_TIME_NONE and the qtmux in splitmuxsink thows the buffer_has_no_PTS error You could try adding a pad_probe which detects this situation to confirm that you are suffering from the same problem.

h264parse should not do that, seems like a bad idea. Did you file an issue ? Also, was this interlaced content ?

> 
> -----Ursprüngliche Nachricht-----
> Von: gstreamer-devel <gstreamer-devel-bounces at lists.freedesktop.org> 
> Im Auftrag von Henk Schurink
> Gesendet: Freitag, 15. November 2019 10:52
> An: gstreamer-devel at lists.freedesktop.org
> Betreff: Pipeline fails after exactly 2.5 hours
> 
> Hello gstreamers,
> 
> The following pipeline fails after exactly 2.5 hours every time:
> 
> sudo gst-launch-1.0 -e rtspsrc
> location=rtsp://HT1:%24hypothermicCamera1%23%23@192.168.0.30:88/videoMain !
> rtpjitterbuffer ! rtph264depay ! decodebin ! videoconvert ! x264enc !
> h264parse ! splitmuxsink location="/c1/record%07d.mp4"
> max-size-bytes=100000000 max-files=6000
> 
> After that time it has only recorded about 1.8GB of footage and my disk has 2.7TB free, so space should not be a problem.
> 
> Here's the error:
> 
> ERROR: from element
> /GstPipeline:pipeline0/GstSplitMuxSink:splitmuxsink0/GstMP4Mux:muxer: Could not multiplex stream.
> Additional debug info:
> gstqtmux.c(4561): gst_qt_mux_add_buffer ():
> /GstPipeline:pipeline0/GstSplitMuxSink:splitmuxsink0/GstMP4Mux:muxer:
> Buffer has no PTS.
> EOS on shutdown enabled -- waiting for EOS after Error Waiting for EOS...
> Redistribute latency...
> 
> Any help would be appreciated!
> 
> Best regards,
> Henk Schurink
> 
> 
> 
> --
> Sent from: 
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgstre
> amer-devel.966125.n4.nabble.com%2F&data=02%7C01%7C%7Ce3ffb26337734
> eb18fe508d76c56da14%7C28042244bb514cd680347776fa3703e8%7C1%7C0%7C63709
> 6992586929449&sdata=97Ihu0USqnchrDLxHffdiHx3%2BCOPF3begTEbkqWLkE4%
> 3D&reserved=0 _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist
> s.freedesktop.org%2Fmailman%2Flistinfo%2Fgstreamer-devel&data=02%7
> C01%7C%7Ce3ffb26337734eb18fe508d76c56da14%7C28042244bb514cd680347776fa
> 3703e8%7C1%7C0%7C637096992586939402&sdata=7ahSby4oxVraqY08dqHSlw5G
> u9bu06vIssP2WWxTzfI%3D&reserved=0
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist
> s.freedesktop.org%2Fmailman%2Flistinfo%2Fgstreamer-devel&data=02%7
> C01%7C%7Ce3ffb26337734eb18fe508d76c56da14%7C28042244bb514cd680347776fa
> 3703e8%7C1%7C0%7C637096992586939402&sdata=7ahSby4oxVraqY08dqHSlw5G
> u9bu06vIssP2WWxTzfI%3D&reserved=0

_______________________________________________
gstreamer-devel mailing list
gstreamer-devel at lists.freedesktop.org
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Fgstreamer-devel&data=02%7C01%7C%7Ce3ffb26337734eb18fe508d76c56da14%7C28042244bb514cd680347776fa3703e8%7C1%7C0%7C637096992586939402&sdata=7ahSby4oxVraqY08dqHSlw5Gu9bu06vIssP2WWxTzfI%3D&reserved=0