Unable to play .mov file, both autio and video freez after playing for 1 - 2 seconds.

[David Ing]

If you add "--gst-debug-level=3" after gst-launch-1.0 then you can see any
warning and error logs.

Does it play using gst-play-1.0?

On Sun, Nov 24, 2019, 7:40 AM Vasu Dev <vasu.stn at gmail.com> wrote:

> Hi,
>
> Have recently been using Gstreamer, have a sample .mov file , which have
> been attempting to play both the audio and video, attempts 2 through 4 have
> resulted in the audio and video playing for about 0.45 seconds to 2
> seconds, and then the video frame freezes, and the audio stops. All my 4
> attempts and the log from the commanline are below :
>
> The .mov file content is for  30 seconds.
>
> Any insight would be appreciated.
> Thank you
>
>
> My first attempt :
>
> C:\gstreamer\1.0\x86_64\bin>gst-launch-1.0 filesrc location=C:\\test.mov !
> queue ! decodebin ! autovideosink
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> Redistribute latency...
> ERROR: from element /GstPipeline:pipeline0/GstFileSrc:filesrc0: Internal
> data stream error.
> Additional debug info:
> ../libs/gst/base/gstbasesrc.c(3072): gst_base_src_loop ():
> /GstPipeline:pipeline0/GstFileSrc:filesrc0:
> streaming stopped, reason not-negotiated (-4)
> ERROR: pipeline doesn't want to preroll.
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
> Second attempt :
>
> C:\gstreamer\1.0\x86_64\bin>gst-launch-1.0 filesrc location=C:\\test.mov !
> decodebin name=decoder decoder. ! queue ! audioconvert ! audioresample !
> fakesink decoder. ! videoconvert ! autovideosink
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> Redistribute latency...
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstSystemClock
> handling interrupt.
> Interrupt: Stopping pipeline ...
> Execution ended after 0:00:11.745902600
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
> 3rd Attempt :
>
> C:\gstreamer\1.0\x86_64\bin>gst-launch-1.0 filesrc location=C:\\test.mov !
> decodebin name=decoder decoder. ! queue ! audioconvert ! audioresample !
> autoaudiosink decoder. ! videoconvert ! autovideosink
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> Redistribute latency...
> Redistribute latency...
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstAudioSinkClock
> WARNING: from element
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstD3DVideoSink:autovideosink0-actual-sink-d3dvideo:
> A lot of buffers are being dropped.
> Additional debug info:
> ../libs/gst/base/gstbasesink.c(3005): gst_base_sink_is_too_late ():
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstD3DVideoSink:autovideosink0-actual-sink-d3dvideo:
> There may be a timestamping problem, or this computer is too slow.
> handling interrupt.
> Interrupt: Stopping pipeline ...
> Execution ended after 0:12:56.520797700
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
> C:\gstreamer\1.0\x86_64\bin>gst-launch-1.0 filesrc location=C:\\test.mov !
> decodebin name=decoder decoder. ! queue ! audioconvert ! audioresample !
> autoaudiosink decoder. ! queue ! videoconvert ! autovideosink
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> Redistribute latency...
> Redistribute latency...
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstAudioSinkClock
> handling interrupt.
> Interrupt: Stopping pipeline ...
> Execution ended after 0:00:42.206500200
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
>
> 4th attempt :
>
> C:\gstreamer\1.0\x86_64\bin>gst-launch-1.0 filesrc location=C:\\test.mov !
> qtdemux name=demux  demux.audio_0 ! queue ! decodebin ! audioconvert !
> audioresample ! autoaudiosink   demux.video_0 ! queue ! decodebin !
> videoconvert ! videoscale ! autovideosink
> Setting pipeline to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> Redistribute latency...
> handling interrupt.
> Interrupt: Stopping pipeline ...
> ERROR: pipeline doesn't want to preroll.
> Setting pipeline to NULL ...
> Freeing pipeline .
>
>
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/gstreamer-devel/attachments/20191124/7fa30692/attachment.html>